Abstract:Wet compression moulding (WCM) provides large-scale production potential for continuously fiber reinforced components as a promising alternative to resin transfer moulding (RTM). Lower cycle times are possible due to parallelization of the process steps draping, infiltration and curing during moulding (viscous draping). Experimental and theoretical investigations indicate a strong mutual dependency between the physical mechanisms, which occur during draping and mould filling (fluid-structure-interaction). Thus, key process parameters, like fiber orientation, fiber volume fraction, cavity pressure and the amount and viscosity of the resin are physically coupled. To enable time and cost efficient product and process development throughout all design stages, accurate process simulation tools are desirable. Separated draping and mould filling simulation models, as appropriate for the sequential RTM-process, cannot be applied for the WCM process due to the above outlined physical couplings. Within this study, a two-dimensional Darcy-Propagation-Element (DPE-2D) based on a finite element formulation with additional control volumes (FE/CV) is presented, verified and applied to forming simulation of a generic geometry, as a first step towards a fluid-structure-interaction model taking into account simultaneous resin infiltration and draping. The model is implemented in the commercial FE-Solver Abaqus by means of several user subroutines considering simultaneous draping and 2D-infiltration mechanisms. Darcy’s equation is solved with respect to a local fiber orientation. Furthermore, the material model can access the local fluid domain properties to update the mechanical forming material parameter, which enables further investigations on the coupled physical mechanisms.

Computational Fluid Dynamic (CFD) Simulations of Liquid Steel Infiltration in Porous Ceramic Structures: Dynamics of the Penetrating Melt Surface

Multiphase Flow Simulation of Water Entry of a Structure with Complex Geometry Using a Three-Dimensional Parallel Compressible Model

Impregnation of Composite Materials: a Numerical Study

Infiltration and permeability of porous ceramics simulated by random networks

Multi-physics coupling numerical simulation of variable porosity in reactive melt infiltration process

A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding

Numerical Simulation of Unidirectional Infiltration of Silicon Carbide Preforms

3D actual microstructure-based modeling of non-isothermal infiltration behavior and void formation in liquid composite molding

Simulation of capillary infiltration into packing structures by the Lattice-Boltzmann method for the optimization of ceramic materials

Pore-resolved CFD in Digital Twin of Porous Monoliths Reconstructed by Micro-computed Tomography

Numerical simulation of transpiration cooling through porous material

Numerical Simulation of Infiltration Behavior of ZTAP/HCCI Composites

Thermo-Mechanical Behavior Analysis of Pressure Infiltration Casting Process for Manufacturing Open-Cell Metal Foam

Melt Flow and Solidification During Infiltration in Making Steel Matrix Syntactic Foams

Design of Composites by Infiltration Process: A Case Study of Liquid Ir-Si Alloy/SiC Systems

3D observations of room temperature capillary infiltration mechanism in SiC compacts

Simulation of melting infiltration process of phase change material in fiber porous ceramic

Mathematical Modeling of Transient Submerged Entry Nozzle Clogging and Its Effect on Flow Field, Bubble Distribution and Interface Fluctuation in Slab Continuous Casting Mold

Surface growth effects on reactive capillary-driven flow: Lattice Boltzmann investigation

The Interplay Between Pore‐Scale Heterogeneity, Surface Roughness, and Wettability Controls Trapping in Two‐Phase Fluid Displacement in Porous Media

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach