Abstract:The liquid product obtained via the biomass flash pyrolysis is commonly called bio-oil or pyrolysis oil. Bio-oils can be used as sources for chemicals or as fuels, primarily in mixtures or emulsions with fossil fuels. A detailed chemical characterization of bio-oil is necessary to determine its potential uses. Such characterization demands a powerful analytical technique such as comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC×GC-TOFMS). Limited chemical information can be obtained from conventional gas chromatography coupled mass spectrometry (GC-MS) because of the large number of compounds and coelutions. Thus, GC×GC-TOFMS was used for the individual identification of bio-oil components from two samples prepared via the flash pyrolysis of empty palm fruit bunch and pine wood chips. To the best of our knowledge, few papers have reported comprehensive two-dimensional gas chromatography (GC×GC) for bio-oil analysis. Many classes of compounds such as phenols, benzenediols, cyclopentenones, furanones, indanones and alkylpyridines were identified. Several coelutions present in the GC-MS were resolved using GC×GC-TOFMS. Many peaks were detected for the samples by GC-MS (~166 and 129), but 631 and 857 were detected by GC×GC-TOFMS, respectively. The GC×GC-TOFMS analyses indicated that the major classes of components (analytes>0.5% relative area) in the two bio-oil samples are ketones, cyclopentenones, furanones, furans, phenols, benzenediols, methoxy- and dimethoxy-phenols and sugars. In addition, esters, aldehydes and pyridines were found for sample obtained from empty palm fruit bunch, while alcohols and cyclopentanediones were found in sample prepared from pine wood chips indicating different composition profiles due to the biomass sources. The elucidation of the composition of empty fruit bunch and pine wood chips bio-oils indicates that these oils are suitable for the production of value-added chemicals. The high quantity of phenol in the bio-oil of empty palm fruit bunch is of interest because phenol isolated from the bio-oil could provide an alternative to the phenol obtained from petroleum. The anhydrosugars found mainly in the bio-oil sample of pine wood chips can be isolated and fermented to produce ethanol or lipids. GC×GC-TOFMS can be used to increase the knowledge of the chemical composition of bio-oils allowing the improved usage of this attractive renewable energy source in bio-fuels.

Development of Comprehensive Analysis of Pyrolysis Products for Lignocellulose Raw Materials and Sludge Sediments by Chromatographic Methods

Investigation of pyrolytic characteristics of three oily sludges with focus on properties of oil product

Character and Composition Analysis of Distilling Fractions from Sewage Sludge Pyrolysis Oil

Exploring molecular composition of upgraded pyrolysis bio-oil using GC×GC-(EI/PI)-TOF MS with different column set-ups

Comparison of lignocellulosic-based biomass pyrolysis processes by multi-scale molecular characterization

Pyrolysis Behaviors of Oil Sludge Based on TG/FTIR and PY-GC/MS

Investigations in pyrolysis kinetics of sludges of different origins: chemical sludge, biological sludge and oily sludge

Progress in Thermal Analysis Studies on the Pyrolysis Process of Oil Sludge

Chemical evaluation of pyrolysis oils from domestic and industrial effluent treatment station sludges with perspective to produce value-added products

Study on the properties and components of solid-liquid products by co-pyrolysis of sludge and cotton stalk

Chemical characterization of bio-oils using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

Separation and Characterization of Pyrolytic Lignins from the Heavy Fraction of Bio-Oil by Molecular Distillation

Bio-Oil Production from Multi-Waste Biomass Co-Pyrolysis Using Analytical Py–GC/MS

Investigation Into Calorific Values And Fields Of Gas, Solid, And Liquid Products From The Pyrolysis Of Municipal Wastewater Sewage Sludge

Comparative (co-)pyrolytic performances and by-products of textile dyeing sludge and cattle manure: Deeper insights from Py-GC/MS, TG-FTIR, 2D-COS and PCA analyses

Pyrolysis of sewage sludge for sustainable biofuels and value-added biochar production

At-Line Sampling and Characterization of Pyrolytic Vapors from Biomass Feedstock Blends Using SPME-GC/MS-PCA: Influence of Char on Fast Pyrolysis

Pyrolysis of wastewater sludge and composted organic fines from municipal solid waste: laboratory reactor characterisation and product distribution

Gas chromatographic-mass spectrometric study of the oil fractions produced by microwave-assisted pyrolysis of different sewage sludges

A Comparative Analysis of Waste Biomass Pyrolysis in Py-GC-MS and Fixed-Bed Reactors

Combustion Behavior and Thermochemical Treatment Scheme Analysis of Oil Sludges and Oil Sludge Semicokes