Abstract:Rolling element bearings (REBs) are an essential part of rotating machinery. A localised defect in a REB typically results in periodic impulses in vibration signals at bearing characteristic frequencies (BCFs), and these are widely used for bearing fault detection and diagnosis. One of the most powerful methods for BCF detection in noisy signals is envelope analysis. However, the selection of an effective band-pass filtering region presents significant challenges in moving towards automated bearing fault diagnosis due to the variable nature of the resonant frequencies present in bearing systems and rotating machinery. Cepstrum Pre-Whitening (CPW) is a technique that can effectively eliminate discrete frequency components in the signal whilst detecting the impulsive features related to the bearing defect(s). Nevertheless, CPW is ineffective for detecting incipient bearing defects with weak signatures. In this study, a novel hybrid method based on an improved CPW (ICPW) and high-pass filtering (ICPW-HPF) is developed that shows improved detection of BCFs under a wide range of conditions when compared with existing BCF detection methods, such as Fast Kurtogram (FK). Combined with machine learning techniques, this novel hybrid method provides the capability for automated bearing defect detection and diagnosis without the need for manual selection of the resonant frequencies. The results from this novel hybrid method are compared with a number of established BCF detection methods, including Fast Kurtogram (FK), on vibration signals collected from the project I2BS (An EU Clean Sky 2 project 'Integrated Intelligent Bearing Systems' collaboration between Schaeffler Technologies and the University of Southampton. Safran Aero Engines was the topic manager for this project) and those from three databases available in the public domain—Case Western Reserve University (CWRU), Intelligent Maintenance Systems (IMS) datasets, and Safran jet engine data—all of which have been widely used in studies of this kind. By calculating the Signal-to-Noise Ratio (SNR) of each case, the new method is shown to be effective for a much lower SNR (with an average of 30.21) compared with that achieved using the FK method (average of 14.4) and thus is much more effective in detecting incipient bearing faults. The results also show that it is effective in detecting a combination of several bearing faults that occur simultaneously under a wide range of bearing configurations and test conditions and without the requirement of further human intervention such as extra screening or manual selection of filters.

Vibration Analysis of Copper Ore Crushers Used in Mineral Processing Plant—Problem of Bearings Damage Detection in Presence of Heavy Impulsive Noise

Research of Feature Extraction Method Based on Sparse Reconstruction and Multiscale Dispersion Entropy

An alternative bearing fault detection strategy for vibrating screen bearings

Recent Developments in Vibration Based Diagnostics of Gear and Bearings Used in Belt Conveyors

Research on extracting weak repetitive transients of fault rolling element bearing

Condition Monitoring of Horizontal Sieving Screens-A Case Study of Inertial Vibrator Bearing Failure in Calcium Carbonate Production Plant

A fault diagnosis method for rolling element bearing (REB) based on reducing REB foundation vibration and noise-assisted vibration signal analysis

Rolling Bearing Condition Monitoring Technique Based on Cage Rotation Analysis and Acoustic Emission

Dual-impulse Behavior Analysis and Quantitative Diagnosis of the Raceway Fault of Rolling Bearing

PREDICTIVE MONITORING OF TECHNICAL CONDITION BY ANALYZING THE VIBRATION SIGNAL COMPONENTS OF ROTATING ELECTRIC MACHINE BEARINGS

Experimental Investigation on Double Impulses Phenomenon of Outer Race Spalled Rolling Element Bearings Based on Acoustic Emission Signals.

The Shock Pulse Index And Its Application In The Fault Diagnosis Of Rolling Element Bearings

Bearing damage detection with orthogonal and non-negative low-rank feature extraction

Noise Resistant Time Frequency Analysis and Application in Fault Diagnosis of Rolling Element Bearings

Repetitive Transients Extraction Algorithm for Detecting Bearing Faults

A Novel Hybrid Technique Combining Improved Cepstrum Pre-Whitening and High-Pass Filtering for Effective Bearing Fault Diagnosis Using Vibration Data

Kernel Regression Residual Decomposition Method to Detect Rolling Element Bearing Faults

Review of Condition Monitoring of Rolling Element Bearing Using Vibration Analysis and Other Techniques

Research of Two Different Impulsive Faults of Rolling Element Bearing

Bearing diagnostics under strong electromagnetic interference based on Integrated Spectral Coherence

Markov Modeling of Signal Condition Transitions for Bearing Diagnostics Under External Interference Conditions