Abstract:Passive tuned mass dampers (TMDs) have been increasingly investigated for vibration control of wind turbines. However, TMD designs based on individual or a few operating conditions may result in insufficient consideration of the TMD's impact on wind turbines. For instance, the influence of end-stop collision forces on the main structural damage may be significantly underestimated, thereby affecting the overall lifecycle evaluation. In this study, focusing on large offshore fixed-bottom monopile wind turbines, we propose an integrated TMD design methodology taking the damper displacement constraints into full account. A comprehensive optimization of the passive omnidirectional pendulum-type TMD is conducted considering large number of operating conditions in the offshore environment. Next, a real-world application of the optimally designed TMD is performed for a 6450 kW monopile offshore wind on the Yellow Sea, China. We develop an on-site testing methodology and evaluation criteria for assessing the effectiveness of the TMD offshore. The results of resonance, emergency stop, operatingand reliability test conditions demonstrate the following: under the optimized TMD design taking into account all operating conditions, the TMD with a mass ratio of 1.56% can offer added damping in the fore-aft and side-side directions of the turbine, and provides the desired damping ratio of 1%; within a 4% frequency range around the design frequency, the TMD achieves effective vibration control; at rated power, the TMD achieves a reduction of more than 50% in the amplitude of the tower base side-side bending moment (Mx). The integrated TMD design with displacement constraints allows for the optimal TMD design across all operating conditions, thereby achieving superior overall vibration control and reduction in fatigue loads. The successful real-world application of the TMD based on integrated design methodology is of high value to the research community.

Vibration mitigation of an integrated structure consisting of a monopile offshore wind turbine and aquaculture cage under earthquake, wind, and wave loads

Mitigation of Side-to-side Vibration of a 10MW Monopile Offshore Wind Turbine under Misaligned Wind and Wave Conditions by an Active Torque Control

Vibration control of a pentapod offshore wind turbine under combined seismic wind and wave loads using multiple tuned mass damper

Vibration control of a monopile offshore wind turbines under recorded seismic waves

Integrated design and real-world application of a tuned mass damper (TMD) with displacement constraints for large offshore monopile wind turbines

Vibration control of offshore wind turbine under multiple hazards using single variable-stiffness tuned mass damper

Mitigation of coupled wind-wave-earthquake responses of a 10 MW fixed-bottom offshore wind turbine

Model Tests on the Long-Term Dynamic Performance of Offshore Wind Turbines Founded on Monopiles in Sand

Modeling and optimization of multiple tuned mass dampers for a barge-type floating offshore wind turbine

Vibration Control of a Jacket Offshore Wind Turbine Under Earthquake Wind and Wave Loads by Tuned Mass Damper

Modeling and dynamic response analysis of a submersible floating offshore wind turbine integrated with an aquaculture cage

Vibration control of offshore wind turbines with a novel energy-adaptive self-powered active mass damper

Experimental study on mitigating vibration of floating offshore wind turbine using tuned mass damper

Application of an Eddy Current-Tuned Mass Damper to Vibration Mitigation of Offshore Wind Turbines

Analytical solution of dynamic responses of offshore wind turbine supported by monopile under combined earthquake, wave and wind

Study on a three-dimensional variable-stiffness TMD for mitigating bi-directional vibration of monopile offshore wind turbines

Dynamic Behavior of Piled Jacket Offshore Wind Turbines Based on Integrated Aero-Servo-hydro-ssi-owt Model

Lateral vibration mitigation of monopile offshore wind turbines with a spring pendulum pounding tuned mass damper

Vibration mitigation in offshore wind turbine under combined wind-wave-earthquake loads using the tuned mass damper inerter

Structural vibration control for the offshore floating wind turbine including drivetrain dynamics analysis

Seismic Analysis of 10 MW Offshore Wind Turbine with Large-Diameter Monopile in Consideration of Seabed Liquefaction