Abstract:A series of Polyaniline (PANI) nanofibers were prepared as conductive filler. The polyvinyl alcohol (PVA)/agarose (AG) double network hydrogel was used as flexible substrate. PANI/PVA/AG conductive hydrogel was prepared by in-situ polymerization of polyaniline nanofibers in PVA/AG double network hydrogel. The electrochemical performance of the PANI/PVA/AG hydrogel electrode material was linked to the fiber morphology of polyaniline. The doping of polyaniline with 0.020 mol/L citric acid demonstrated superior fiber morphology compared to doping with other citric acid concentrations, achieving fiber ratios of 80%. The specific capacitance of the PANI/PVA/AG hydrogel electrode materials doped with 0.020 mol/L citric acid was 285 mF/cm2, while the conductivities was 7.1 S/m. The doping of polyaniline with 0.5 mol/L hydrochloric acid demonstrated superior fiber morphology compared to doping with other hydrochloric acid concentrations, achieving fiber ratios of 65%. The specific capacitance of the PANI/PVA/AG hydrogel electrode materials doped with 0.5 mol/L hydrochloric acid was 249 mF/cm2, while the conductivities was 7.6 S/m. After 500 cycles of charge-discharge, the specific capacitance retention of the material was 73%. Photosensitivity tests indicated that the hydrogel exhibited high sensitivity to shorter wavelengths of blue light (460 nm) and ultraviolet light (380 nm). The hydrogel sensor had a high sensitivity to the strain in the range of 0% to 120%. The Gauge factors (GF) of the hydrogel strain sensor were 1.280, 2.141, 1.907, and 1.261 for strain ranges of 0% to 30%, 30% to 60%, 60% to 90%, and 90% to 120%, respectively. The cyclic strain tensile tests indicated that the relative resistance change rate (ΔR/R0) of the hydrogel sensor demonstrated a certain degree of repeatability and stability within the range of 0% to 100%. Thus, the hydrogel sensor has reliability and stability in the signal transmission process of detecting human movement as a flexible strain sensor. These results suggest that the PANI/PVA/AG conductive hydrogel is a multifunctional composite with good electrochemical storage performance, photosensitivity, and strain sensitivity, which can be applied to applications such as supercapacitors, flexible sensors and electronic wearable devices.

Strong conductive hybrid hydrogel electrode based on inorganic hybrid crosslinking

Robust Conductive Nanocomposite Hydrogels with an Interpenetrating Network Based on Polyaniline for Flexible Supercapacitors

Fabrication of PANI@Ti3C2Tx/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

Fabrication of PANI@Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub>/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

Mechanically Robust and Electrically Conductive Hybrid Hydrogel Electrolyte Enabled by Simultaneous Dual In Situ Sol-Gel Technique and Free Radical Copolymerization

Reinforced Polyaniline/polyvinyl Alcohol Conducting Hydrogel from a Freezing–thawing Method As Self-Supported Electrode for Supercapacitors

Self-healing Flexible and Strong Hydrogel Nanocomposites Based on Polyaniline for Supercapacitors

A Triblock Copolymer Design Leads to Robust Hybrid Hydrogels for High-Performance Flexible Supercapacitors

Reinforced conducting hydrogels prepared from the in situ polymerization of aniline in an aqueous solution of sodium alginate

Electrode Material of PVA/PANI/GO‐PANI Hybrid Hydrogels Through Secondary Induced Assembly‐In situ Polymerization Method for Flexible Supercapacitors

A Multidimensional Nanostructural Design Towards Electrochemically Stable and Mechanically Strong Hydrogel Electrodes

Preparation of morphology-controllable polyaniline and polyaniline/ graphene hydrogels for high performance binder-free supercapacitor electrodes

Multifunctional polyaniline nanofibers conductive hydrogel for supercapacitors and flexible sensors

A Robust, Highly Stretchable Supramolecular Polymer Conductive Hydrogel with Self-Healability and Thermo-Processability

A Hydrogel of Ultrathin Pure Polyaniline Nanofibers: Oxidant-Templating Preparation and Supercapacitor Application

Carboxymethyl Cellulose Assisted Polyaniline in Conductive Hydrogels for High-Performance Self-Powered Strain Sensors.

A Hydrogel-Mediated Scalable Strategy Toward Core-Shell Polyaniline/poly(acrylic Acid)-Modified Carbon Nanotube Hybrids As Efficient Electrodes for Supercapacitor Applications

Hierarchical Nanostructured Conducting Polymer Hydrogel with High Electrochemical Activity

Flexible Solid-State Supercapacitors Based On A Conducting Polymer Hydrogel With Enhanced Electrochemical Performance

Copolymer hydrogel as self-standing electrode for high performance all-hydrogel-state supercapacitor

Conducting Polymer Hydrogel Driven By Sodium Chloride as High Performance Flexible Supercapacitor Electrode