Abstract:A reliable non-destructive testing technique that enables effective detection and quantification of defects within safety-critical curved structures is highly demanded both in manufacture and service. Conventional Ultrasonic Testing (UT) methods usually adopt planar ultrasonic probes and it is preferable to adjust the probe axis direction perpendicular to the curved surface, because both the transmitting and receiving sensitivities in the probe axis direction are the highest. This paper proposes a new UT method using a hemispherical-omnidirectional ultrasonic probe. This probe has an omnidirectional directivity pattern and can cover curved surfaces with normal incident ultrasounds at different scan positions without the necessity of adjusting the probe attitude and position to follow the curved surface profiles. A surface reconstruction algorithm is firstly proposed to estimate curved surface profiles, which is based on a fast-imaging algorithm for ultra-wideband radar called the Shape Estimation Algorithm based on the Boundary scattering transform and Extraction of Directly scattered waves (SEABED). This method only uses surface reflection echoes, and thus can inspect curved structures without knowing the surface profiles a prior. Further, the Synthetic Aperture Focusing Technique (SAFT) is implemented to generate a focused image of internal defects by performing delay-and-sum beamforming on defect echoes based on the reconstructed surface profile. The proposed UT method is eventually experimentally verified on a curved plexiglass specimen with 29.4 mm surface curvature radius containing three ϕ 3.5 mm Side Drilled Holes (SDHs) at different depths. Results show that compared with the planar ultrasonic probe, the reconstructed surface profile via SEABED is much wider and accurate with a relative error ≤ 0.47%. All SDHs are not only clearly positioned with relative errors ≤ 7.43%, but also can be accurately quantified from the curvature radius of SDH indications in the SAFT images with relative errors ≤ 8.60%. This work proves that the UT method based on the hemispherical-omnidirectional ultrasonic probe can emerge as a promising technique to inspect curved structures with high efficiency and accuracy, which has great potential in practical applications.

Ultrasonic Inspection for Welds with Irregular Curvature Geometry Using Flexible Phased Array Probes and Semi-Auto Scanners: A Feasibility Study

Simulation of PA-UT Sector Scanning Imaging of Irregular Defects in Polyethylene Pipe Based on Finite Element Analysis

Research on Phased Array Ultrasonic Technique for Testing Butt Fusion Joint in Polyethylene Pipe

Phased Array Ultrasonic Technology Optimization for Electro-Fusion Joint of Polyethylene Pipe

RECONSTRUCTION OF PHASED ARRAY ULTRASONIC TESTING IMAGE OF THROUGH HOLE BASED ON FINITE ELEMENT ANALYSIS

The Research on Automatic Defect Recognition for Phased Array Ultrasonic Inspection of Polyolefin Butt Thermal-Fusion Joint

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Pose of Ultrasonic Phased Array Scanner in Inspecting Tuhbular Joint Welds

Study on Scanner for Large-Diameter Tubular Joint Welds Based on Ultrasonic Phased Array

Ultrasonic Imaging Detection of Welding Joint Defects of Pressure Pipeline Based on Phased Array Technology

Application Research on Ultrasonic Phased Array Technology in Weld Seam Inspection

The application of ultrasonic phased array system to the inspection of fillet weld of flat plate

Inspection system for welded tubular joint based on ultrasonic phased array

Development of a 16-Channel Broadband Piezoelectric Micro Ultrasonic Transducer Array Probe for Pipeline Butt-Welded Defect Detection

Application of Visual Beam Ultrasonic Phased Array in Inspection of Weld in Tubular Node

Round robin experiment to detect, size, and characterize flaws in the welds of existing hydraulic steel structures using phased array ultrasonic testing

Ultrasonic inspection of curved structures with a hemispherical-omnidirectional ultrasonic probe via linear scan SAFT imaging

Ultrasonic Phased Array Inspection Imaging Technology for Ndt of Offshore Platform Structures

A Method of Ultrasonic Phased Array Inspection of Middle-High Pressure Plastic Pipe Reinforced by Cross Helically Wound Steel Wires Electro-Fusion Joint

A New Insight on Phased Array Ultrasound Inspection in MIG/MAG Welding

Ultrasonic Phased Array Technique for Defect Detection and Sizing in Heavy-Walled Cast Components