Abstract:Lithium-sulfur batteries are considered a strong contender for next-generation high-energy battery systems given their high gravimetric energy density. However, this battery chemistry is still facing challenges such as the polysulfide shuttle effect caused by the high solubility of long-chain lithium polysulfides (Li2Sn) resulting in active material loss and compromised cycle life. Solid-state polymer electrolytes (SPEs) represent a promising pathway to address this issue by preventing the formation and transport of these undesirable polysulfide intermediates. 1,2 Moreover, the application of flexible polymer electrolytes promotes safe high energy batteries for smart textiles. In this study, single lithium-ion conducting solid polymer electrolytes (SLIC-SPEs) based on lithiated Nafion membrane have been investigated, utilizing the chemical and thermal stability of this kind of ionomers. Among others, a mixture of ethylene carbonate (EC) and propylene carbonate (PC) was tested as organic aprotic swelling solvent offering advantageous characteristics such as great chemical stability and high ion mobility while avoiding phase separation issues and undesired leaching. Sulfur-infiltrated ultramicroporous carbon composite cathodes were utilized in combination with the investigated SLIC-SPEs, facilitating a quasi-solid-state lithium-sulfur full cell with carbonate-solvent compatibility and high active material utilization. 3 Electrochemical performance of the full cell was investigated elaborately and compared with a reference system using solely the liquid EC:PC solvent. While rapid capacity fading can be observed for the liquid electrolyte cell, an enduring high capacity is found in the lithiated-Nafion system. For better understanding of these effects, cycling analysis was accompanied by implementing impedance spectroscopy upon galvanostatic cycling. The electrochemical characterization indicates the formation of a stable film and high degree of reversibility during cycling of the lithiated-Nafion cell whereas an increased film resistance due to sulfur cross-over and electrolyte decomposition was observed within the liquid electrolyte system. (1) Z. Li, W. Lu, N. Zhang, Q. Pan, Y. Chen, G. Xu, D. Zeng, Y. Zhang, W. Cai, M. Yang, J. Mater. Chem. A 2018, 6 (29), 14330-14338. (2) X. Hao, H. Wenren, X. Wang, X. Xia, J. Tu, J. Colloid Interface sci. 2020, 558 , 145-154, (3) M. Nojabaee, B. Sievert, M. Schwan, J. Schettler, F. Warth, N. Wagner, B. Milow, K. A. Friedrich, J. Mater. Chem. A 2021, 9 (10), 6508-6519,

Confining nonflammable liquid in solid polymer electrolyte to enable nickel-rich cathode-based 4.2 V high-energy solid-state lithium-metal and lithium-ion batteries

Rechargeable Lithium Metal Batteries with an In‐Built Solid‐State Polymer Electrolyte and a High Voltage/Loading Ni‐Rich Layered Cathode

High‐Capacity All‐Solid‐State Sodium Metal Battery with Hybrid Polymer Electrolytes

Flame‐Retardant Polyurethane‐Based Solid‐State Polymer Electrolytes Enabled by Covalent Bonding for Lithium Metal Batteries

In Situ Construction of Li3N-enriched Interface Enabling Ultra-Stable Solid-State LiNi0.8Co0.1Mn0.1O2/lithium Metal Batteries

In-Situ Polymerized High-Voltage Solid-State Lithium Metal Batteries with Dual-Reinforced Stable Interfaces

Bifunctional flame retardant solid-state electrolyte toward safe Li metal batteries

Lithiophilic Li-Si alloy-solid electrolyte interface enabled by high-concentration dual salt-reinforced quasi-solid-state electrolyte

Solid polymer electrolyte with in-situ generated fast Li+ conducting network enable high voltage and dendrite-free lithium metal battery

A High-Flash-point Quasi-Solid Polymer Electrolyte for Stable Nickel-Rich Lithium Metal Batteries

Ultrathin and Non‐Flammable Dual‐Salt Polymer Electrolyte for High‐Energy‐Density Lithium‐Metal Battery

Nafion-Based Quasi-Solid-State Polymer Electrolyte for Lithium-Sulfur Batteries

MXene Surface Engineering Enabling High‐Performance Solid‐State Lithium Metal Batteries

Inherently flame-retardant solid polymer electrolyte for safety-enhanced lithium metal battery

In situ initiator-free gelation of highly concentrated lithium bis(fluorosulfonyl)imide-1,3-dioxolane solid polymer electrolyte for high performance lithium-metal batteries

Constructing Interfacial Nanolayer Stabilizes 4.3 V High‐Voltage All‐Solid‐State Lithium Batteries with PEO‐Based Solid‐State Electrolyte

Mechanism of Bilayer Polymer-Based Electrolyte with Functional Molecules in Enhancing the Capacity and Cycling Stability of High-Voltage Lithium Batteries

Anion Modulation: Enabling Highly Conductive Stable Polymer Electrolytes for Solid‐State Li‐Metal Batteries

Sandwich structured NASICON-type electrolyte matched with sulfurized polyacrylonitrile cathode for high performance solid-state lithium-sulfur batteries

Uniform Boron Nitride Nanospheres with Reactive Surface Defects for Composite Solid-State Electrolytes

Molecular‐level Designed Polymer Electrolyte for High‐Voltage Lithium–Metal Solid‐State Batteries