Abstract:In this work, we studied the electro-optical properties of high-aligned carbon nanotubes deposited at room temperature. For this, we used the High Density Plasma Chemical Vapor Deposition system. This system uses a new concept of plasma generation: a planar coil is coupled to an RF system for plasma generation. This was used together with an electrostatic shield, for plasma densification, thereby obtaining high-density plasmas. The carbon nanotubes were deposited using pure methane plasmas. Three methods were used for the surface modification of the sample: reference substrate (silicon wafer only submitted to a chemical cleaning), silicon wafer with surface roughness generated by plasma etching, silicon wafer with a thin iron film and silicon wafer with diamond nano powder used as precursor materials. For each kind of silicon wafer surface, the carbon nanotubes were deposited with two different deposition times (two and three hours). The carbon nanotubes structural characteristics were analyzed by Atomic Force Microscope and Scanning Electronic Microscope. The carbon nanotubes electrical characteristics were observed by Raman Spectroscopy and the carbon nanotubes electro-optical properties were analyzed by current vs voltage electrical measurements and photo-luminescence spectroscopy measurements. The photoelectric effect in the carbon nanotubes were determined by photo-induced current measurements. In this work, we obtained carbon nanotubes with semiconductor properties and carbon nanotubes with metallic properties. The electro-optical effects depend strongly on the substrate preparation and the deposition parameters of the carbon nanotubes. The carbon nanotubes are high aligned and show singular properties that can be used for many applications.

Comparison of Plasma Deposition of Carbon Nanomaterials Using Various Polymer Materials as a Carbon Atom Source

Recent Progresses in Material Fabrication and Modification by Cold Plasma Technique

Surface-initiated Graft Polymerization on Multiwalled Carbon Nanotubes Pretreated by Corona Discharge at Atmospheric Pressure

Electrophoretic Deposition of Multi‐Walled Carbon Nanotubes: The Key Role of Plasma Functionalization and Polymerization

Growth Process Conditions of Vertically Aligned Carbon Nanotubes Using Plasma Enhanced Chemical Vapor Deposition

Understanding growth of carbon nanowalls at atmospheric pressure using normal glow discharge plasma-enhanced chemical vapor deposition

Characterization of Plasma-Enhanced Chemical Vapor Deposition Carbon Nanotubes by Auger Electron Spectroscopy

A Single‐Step Process to Produce Carbon Nanotube‐Zinc Compound Hybrid Materials

Uniform Patterned Growth of Carbon Nanotubes Without Surface Carbon

Plasma Enhanced Chemical Vapour Deposited Carbon Nanotubes for Field Emission Applications

Synthesis and characterization of carbon nanowalls on different substrates by radio frequency plasma enhanced chemical vapor deposition

Study of Multi-Walled Carbon Nanotube Structures Fabricated by PMMA Suspended Dispersion

Preferential Growth of Carbon Nanotubes/Nanofibers Using Lithographically Patterned Catalysts

Plasma Composition During Plasma-Enhanced Chemical Vapor Deposition of Carbon Nanotubes

Electro-Optical Properties of Carbon Nanotubes Obtained by High Density Plasma Chemical Vapor Deposition

Effects of Plasma Ions/Radicals on Kinetic Interactions in Nanowall Deposition: A Review

Effects of gas pressure and plasma power on the growth of carbon nanostructures

Plasma Treatment of Nanocellulose to Improve the Surface Properties

Synthesis of Carbon Nanowalls using Plasma-Irradiated Solid Carbon and Absorption of Cs in Water

Nitrogen admixture effects on growth characteristics and properties of carbon nanowalls

Advancements in Plasma-Enhanced Chemical Vapor Deposition for Producing Vertical Graphene Nanowalls