Abstract:The practical engineering applications of powder metallurgy (PM) Ti alloys produced through cold compaction and pressure-less sintering are impeded by poor sintering densification, embrittlement caused by excessive O impurities, and severe sintering deformation resulting from the use of heterogeneous powder mixtures. This review presents a summary of our previous work on addressing the above challenges. Initially, we proposed a novel strategy using reaction-induced liquid phases to enhance sintering densification. Near-complete density (relative density exceeding 99%) was achieved by applying the above strategy and newly developed sintering aids. By focusing on the O-induced embrittlement issue, we determined the onset dissolution temperature of oxide films in the Ti matrix. On the basis of this finding, we established a design criterion for effective O scavengers that require reaction with oxide films before their dissolution. Consequently, a ductile PM Ti alloy was successfully obtained by introducing 0.3wt% NdB 6 as the O scavenger. Lastly, a powder-coating strategy was adopted to address the sintering deformation issue. The ultrafine size and shell-like distribution characteristics of coating particles ensured rapid dissolution and homogeneity in the Ti matrix, thereby facilitating linear shrinkage during sintering. As a result, geometrically complex Ti alloy parts with high dimensional accuracy were fabricated by using the coated powder. Our fundamental findings and related technical achievements enabled the development of an integrated production technology for the high-performance and accurate shaping of low-cost PM Ti alloys. Additionally, the primary engineering applications and progress in the industrialization practice of our developed technology are introduced in this review.

Development and Productization of High Performance Powder Metallurgy Materials

Development of Powder Metallurgy High Speed Steel

Metal Powder for AM (Additive Manufacturing) and Manufacturing Processes

New development of powder metallurgy in automotive industry

Research Progress on TiAl Alloy Prepared by Powder Metallurgy

Additive manufacturing of a high-performance aluminum alloy from cold mechanically derived non-spherical powder

Integrated high-performance and accurate shaping technology of low-cost powder metallurgy titanium alloys: A comprehensive review

Progress in Hot Hydrostatic Extrusion of Powder Metallurgy Hard Metallic Materials

An ICME-Based Computational Framework for Accelerating IN718 Component Development via Powder Metallurgy

Development of metal AM technology for gas turbine components

Powder Metallurgy Methods and Applications

Powder Metallurgy Strategies to Improve Properties and Processing of Titanium Alloys: A Review

Hardenability of PM Steel Alloyed Using Tailored Master Alloys

An Improved Process for Solving the Sintering Problem of Al-Si Alloy Powder Metallurgy

Development of Alloy Powders for Biomedical Additive Manufacturing

High Strength Sinter-Hardening Powder Metallurgy Alloys

High-throughput Alloy and Process Design for Metal Additive Manufacturing

Alloy development and process innovations for light metals casting

The Metallurgy of Additive Manufacturing: Potentials and Challenges towards Industrialisation

Development and characterisation of direct laser sintering Cu-based metal powder

Mechanical alloying and direct powder forging of Ni–20Cr–20Fe-0.08C alloy