Abstract:Considerable property damage is caused by windborne debris during extreme weather. The object of interest in this study, steel wire mesh, is an effective means of providing protection against windborne debris. However, the design and manufacture of security screens made of wire mesh typically depend on a laborious and imprecise trial-and-error process. Additionally, this anisotropic, inhomogeneous, and porous material comprising in-contact wires has rarely been examined in a comprehensive manner. Considering these issues, the current research experimentally tested the impact response of plain-weave steel wire mesh by firing a spherical projectile in a velocity regime ranging from 112 m/s to 152 m/s. The deformation and failure mechanisms of the wire mesh during the impact process were investigated via high-speed photography. The results showed that the wire mesh behaved as a membrane and failed mainly in tension over the impact velocity range of interest. Further, with a detailed finite element model consisting of interlaced warp and weft wires, additional virtual tests were carried out at a broader velocity range of 20–200 m/s. The findings indicated a linear relationship between residual velocity and impact velocity under a velocity range that exceeded the ballistic limit. The energy absorbed by the wire mesh increased with impact velocity (or impact energy) before the material reached peak absorption at the ballistic limit. Beyond this threshold, the energy absorption gradually declined to an asymptotic level. Such energy absorption was well correlated with the extent of transverse deformation in the wire mesh. Internal energy due to the deformation of wires and frictional energy associated with the interactions between sliding wires at their crossovers were two primary energy absorbing mechanisms. Moreover, the effects of impact location, clamped wire direction and projectile size were analyzed.

Finite element simulation of impact response of wire mesh screens

On the mechanical behaviour of steel wire mesh subjected to low-velocity impact

Dynamic failure behavior of steel wire mesh subjected to medium velocity impact: Experiments and simulations

Simulation research on impact damages under low velocities of composite grid structures for aircraft wing

Homogenized shell element-based modeling of low-velocity impact response of stainless-steel wire mesh

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

Numerical Modelling of Glass Fibre Metal Laminates Subjected to High Velocity Impact

The Simulation and Analysis of the Impact Injury of Persons in Cars with Finite Element Methods

Experimental studies of low-velocity impact behavior on hybrid metal wire net/woven carbon-fiber reinforced composite laminates

Numerical Investigation into Using Coarse Meshes to Predict Damage Behaviors of Laminated Composites Subjected to Low-Velocity Impact

Effective Elastic Constants of Wire Mesh Material Studied by Theoretical and Finite Element Methods

Experimental investigation on damage mechanism of GFRP laminates embedded with/without steel wire mesh under low-velocity-impact and post-impact tensile loading

Investigation of the mechanical response of laminated composites reinforced with different type wire mesh

Experimental investigation on low-velocity impact and compression after impact behaviors of GFRP laminates with steel mesh reinforced

Finite Element Analysis and Modeling of a Hydraulic Wire Mesh Rounder and Efficacy of I-Beam Reinforcement in Wire Mesh Mold Beds

In-plane compression response of woven CFRP composite after low-velocity impact: Modelling and experiment

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Impact Simulation on Ductile Metal Pipe with Polymer Coating by a Coupled Finite Element and Meshfree Method

Impact Response of Carbon/Kevlar Hybrid 3D Woven Composite under High Velocity Impact: Experimental and Numerical Study

Numerical investigation on dynamic response of the screen mesh in vibrating screening through DEM-FEM co-simulation