Abstract:Conventional industrial processes for the manufacture of Lithium-Ion Battery (LIB) electrodes are costly and not environmentally friendly. The state-of-the-art slurry casting technique utilizes a large amount of toxic N-methly pyrollidinone (NMP), necessitating significant energy and capital costs associated with electrode drying and solvent recovery. Electrostatic Dry Powder Deposition (EDPD) is well established in many industries as an effective method of achieving well-adhered and uniform coatings of controlled thickness & composition. Recently, a small number of studies have demonstrated the viability of EDPD in LIB electrode manufacture, achieving cell capacities similar to, or exceeding, those from slurry casting. Crucially, this approach eliminates the need for solvent usage. Nevertheless, several challenges remain before EDPD can be adopted within the LIB industry. In particular, achieving adequate dispersion of powder materials and a level of adhesion sufficient for use in standard roll-2-roll lines. With the goal of developing & demonstrating the viability of the EDPD process, this work will present a solvent-free approach, coupled with innovative methods to improve adhesion and overall coating quality. The high voltage spinel cathode Lithium Nickel Manganese Oxide (LNMO) was utilized as a demonstrator material, as it can provide high energy density cells without the use of expensive and rare cobalt. Results will include: (a) development of EDPD equipment and appropriate process parameters, (b) optimization of coating formulation, (c) adhesion enhancement through through the use of in-situ heating and post-deposition treatments, (d) electrochemical analysis of EDPD electrodes and benefits compared with slurry casting, (e) full process cost analysis. The presentation will conclude with a discussion of the potential of this new manufacturing technique to disrupt the LIB industry. Rechargeable lithium-ion batteries (LIBs) are ubiquitous in mostly every electronic device. However, the process of manufacturing LIBs is costly and not environmentally friendly. State of the art LIB electrode manufacturing is carried out using slurry casting. A mixture of active material (most commonly containing Cobalt), a binder and a conductive additive are mixed with a solvent and cast onto a substrate. This process is energy-intensive and requires significant capital for drying equipment and processes and the recovery of toxic solvents, such as N-methyl pyrrolidone (NMP). Utilising an EDPD process with a Cobalt free active material such as LNMO in place of the slurry casting process would eliminate the need to use toxic solvents, thereby significantly reducing the manufacturing time and cost. Additionally, LNMO can work as a replacement for the next-generation lithium-ion battery Cobalt-free cathode materials due to its high lithiation/delithiation potential, > 4.5 V compared with 3 – 4 V in the case of more conventional cathode material. The EDPD process presented has demonstrated that a reduction in cost of over 35% can be achieved when tested with LNMO, polyvinylidene fluoride (PVDF) as binder and Carbon Black (CB) as a conductive additive, by eliminating the use of NMP and Cobalt from the process. This is based on a comparison carried out with 1kg of active material mix. There are challenges associated with dry powder electro manufacture for LIBs, such as achieving good adhesion, tortuosity, and obtaining an even dispersion and thickness of the coating. This work addresses these challenges and develops an innovative dry powder deposition method assisted with a low power laser to improve adhesion in a scalable manner. Using a combination of EDPD, low heat and low power laser as an enhancement for the adhesion process in electrode manufacture create an innovative opportunity to remove the toxic solvents to achieve good dry powder depositions making the process less energy demanding and more environmentally friendly. The present research will focus on how to produce dry electrodes with electrostatic coating manufacture, the process innovation of adding a Laser to improve the adhesion and electrochemical testing to quantify the LIB's performance when using this approach. Early research has shown that the manufactured electrodes have similar capacity retention and improved rate capability in lithium-ion batteries when compared to the current state of the art of slurry casting. The simple process operation offers flexibility in scalable production and modularity for future development and commercial implementation.

Discontinuous and Continuous Processing of Low-Solvent Battery Slurries for Lithium Nickel Cobalt Manganese Oxide Electrodes

Process- Structure Property Correlations in Continuous Processing of High-Power Anode Electrode Pastes for Application in Lithium Ion Batteries

Investigating the Structure and Performance of Electrodes Made by Dry and Wet Slurry Processes

Investigating the Structure and Performance Differences between the Electrodes Made by a Dry and a Wet Slurry Processes

Understanding the Effects of the Mixing Processes on the Performance of NMC-LMO Blend Electrodes Made by a Dry Electrostatic Spray Deposition Process

Advancements in Dry Coating for Battery Electrodes: Scalable Extrusion Mixing for Control of Electrode Microstructure and Electrochemical Performance

(Invited) Slug-Flow Manufacturing of Uniform and Tunable Battery Cathode Materials

Dry Battery Electrode Manufacturing Enabled By Continuous Powder Mixing

Modeling Approaches for the Description of the Carbon Black Particle Size in Batch and Continuous Dispersion Processes for Lithium-Ion Battery Slurries

Enabling Aqueous Processing of Ni-Rich Layered Oxide Cathode Materials by Using Lithium Sulphate as Processing Additive

Suitable Cathode NMP Replacement for Efficient Sustainable Printed Li-Ion Batteries

Enabling the Production of Homogeneous High-Load Positive Electrodes by Tailoring the Electrode Formulation – a Conductive Additive and Solvent Approach

Rheological Studies of LiNi0.6Mn0.2Co0.2O2-Based Slurry for the Development of Energy Dense Li-Ion Applications

(Invited) Slug-Flow Manufacturing of Nickel-Cobalt-Manganese-Oxide Cathode Particles for Lithium-Ion Batteries

Advances in the Aqueous Processing of Ni-Rich Positive Electrodes

Rheological properties and stability of NMP based cathode slurries for lithium ion batteries

Impact of Formulation and Slurry Properties on Lithium‐ion Electrode Manufacturing

Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication

Surface Engineering Based on Conductive Agent Dispersion Uniformity: Strategies toward Performance Consistency of Lithium-Ion Batteries

Low Cost, Solvent-Free Lithium-Ion Battery Electrode Manufacturing Based on Electrostatic Dry Powder Coating

Electrolytic Separation and Reuse of Active Materials from Discarded Lithium-Ion Batteries