Abstract:Chemical vapor deposition was used to produce multi-walled carbon nanotubes (MWCNTs), which were modified by Fe–Ni/AC catalysts to enhance CO 2 adsorption. In this study, a new realm of possibilities and potential advancements in CO 2 capture technology is unveiled through the unique combination of cutting-edge modeling techniques and utilization of the recently synthesized Fe–Ni/AC catalyst adsorbent. SEM, BET, and FTIR were used to analyze their structure and morphology. The surface area of MWCNT was found to be 240 m 2 /g, but after modification, it was reduced to 11 m 2 /g. The modified MWCNT showed increased adsorption capacity with higher pressure and lower temperature, due to the introduction of new adsorption sites and favorable interactions at lower temperatures. At 25 °C and 10 bar, it reached a maximum adsorption capacity of 424.08 mg/g. The optimal values of the pressure, time, and temperature parameters were achieved at 7 bar, 2646 S and 313 K. The Freundlich and Hill models had the highest correlation with the experimental data. The Second-Order and Fractional Order kinetic models fit the adsorption results well. The adsorption process was found to be exothermic and spontaneous. The modified MWCNT has the potential for efficient gas adsorption in fields like gas storage or separation. The regenerated M-MWCNT adsorbent demonstrated the ability to be reused multiple times for the CO 2 adsorption process, as evidenced by the study. In this study, a feed-forward MLP artificial neural network model was created using a back-propagation training approach to predict CO 2 adsorption. The most suitable and efficient MLP network structure, selected for optimization, consisted of two hidden layers with 25 and 10 neurons, respectively. This network was trained using the Levenberg–Marquardt backpropagation algorithm. An MLP artificial neural network model was created, with a minimum MSE performance of 0.0004247 and an R 2 value of 0.99904, indicating its accuracy. The experiment also utilized the blank spreadsheet design within the framework of response surface methodology to predict CO 2 adsorption. The proximity between the Predicted R 2 value of 0.8899 and the Adjusted R 2 value of 0.9016, with a difference of less than 0.2, indicates a high level of similarity. This suggests that the model is exceptionally reliable in its ability to predict future observations, highlighting its robustness.

Predicting pure and binary gas adsorption on activated carbon with two-dimensional cubic equations of state (2-D EOSs) and artificial neural network (ANN) method

Prediction of Carbon Dioxide Adsorption Via Deep Learning.

Adsorption of propylene and ethylene on 15 activated carbons

Prediction of Methane Adsorption Isotherms in Metal–organic Frameworks by Neural Network Synergistic with Classical Density Functional Theory

Correlations and Prediction of Adsorption Capacity and Affinity of Aromatic Compounds on Activated Carbons

Comprehensive investigation of isotherm, RSM, and ANN modeling of CO2 capture by multi-walled carbon nanotube

Two-Dimensional Energy Histograms as Features for Machine Learning to Predict Adsorption in Diverse Nanoporous Materials.

Multicomponent Gas Adsorption Behavior of Kerogen: A Molecular Investigation

Adsorption equilibrium of ammonia and water on porous adsorbents at low pressure: Machine learning-based models

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

Direct Prediction of Gas Adsorption Via Spatial Atom Interaction Learning

Evaluating isotherm models for the prediction of flue gas adsorption equilibrium and dynamics

Prediction of coefficients of the Langmuir adsorption isotherm using various artificial intelligence (AI) techniques

Optimization of electrochemically synthesized Cu3(BTC)2 by Taguchi method for CO2/N2 separation and data validation through artificial neural network modeling

Monte Carlo simulation of carbon monoxide, carbon dioxide and methane adsorption on activated carbon

IAST and GCMC predictions and experimental measurements of gas mixture adsorption on three metal–organic frameworks

ADSORPTION MODELS FOR MIXED GASES OF CS_2 AND CO_2 ON ACTIVATED CARBON

Application of artificial neural networks and Langmuir and Freundlich isotherm models to the removal of textile dye using biosorbents: A comparative study among methodologies

Model for Predicting CO2 Adsorption in Coal Left in Goaf Based on Backpropagation Neural Network

Artificial Intelligence Based Methods for Asphaltenes Adsorption by Nanocomposites: Application of Group Method of Data Handling, Least Squares Support Vector Machine, and Artificial Neural Networks

Efficient prediction of water vapor adsorption capacity in porous metal–organic framework materials: ANN and ANFIS modeling