Combined autotrophic nitritation and bioelectrochemical-sulfur denitrification for treatment of ammonium rich wastewater with low C/N ratio

Haiyan Wang,Qianyu Hang,John Crittenden,Yuexi Zhou,Quan Yuan,Haitao Liu
DOI: https://doi.org/10.1007/s11356-015-5460-0
IF: 5.8
2015-09-26
Environmental Science and Pollution Research
Abstract:A novel combined autotrophic nitritation and bioelectrochemical-sulfur denitrification (CANBSD) process was developed for treatment of synthetic ammonium-rich wastewater with low carbon/nitrogen ratio. Total nitrogen removal of the CANBSD was higher than 95 %, the effluent SO42− was lower than 1280 mg L−1, and the maximum nitrogen volumetric loading rate was 1.2 kg m−3 day−1 when (1) the influent NH4+-N was lower than 1008 mg L−1, (2) hydraulic retention time was between 3.7 and 32 h, (3) the DO was between 0.5 and 1.2 mg L−1, (4) the pH was between 7.5 and 8.2, and (5) the temperature was between 28 and 30 °C. Both the NH4+-N removal and conversion to NO2−-N in the nitritation membrane reactor (NMBR) were maintained at about 50 %, and the residual NH4+-N and accumulated NO2−-N were subsequently treated in the bioelectrochemical-sulfur three-dimensional denitrification reactor. The CANBSD energy consumption was 0.13 and 3.4 kWh m−3, respectively, for influent NH4+-N of 100 and 1000 mg L−1. The energy consumption of CANBSD was close to that of partial nitritation-ANNMMOX.
environmental sciences
What problem does this paper attempt to address?