Abstract:Nanocrystalline Ti1- x Crx O2 (0 ≤ x ≤ 0.20) samples were synthesised via acid-modified sol-gel process and characterised with various techniques, such as HRTEM, FESEM, Raman, XPS, DTA and VSM. The TEM image of TiO2 exhibits elongated nanoparticles with an average size of 10 nm. The HRTEM in combination with selected area electron diffraction (SAED) reveals the interplanar spacing and polycrystalline nature of the samples, respectively. FESEM micrographs divulge nonuniform morphologies and less aggregation of the particles in the doped sample. Raman spectra ensure the phase purity of the samples and a blue shift on Cr doping. X-ray photoelectron spectra (XPS) predict the chemical state of the elements and oxygen vacancies in the prepared samples. Room temperature magnetic measurements exhibit a significant variation in the magnetic parameters on Cr doping in TiO2 . The differential thermal analysis (DTA) shows the structural phase transition at ∼630°C. The photocatalytic performance is studied for the degradation of methylene blue (MB) dye under visible light irradiation. A higher photocatalytic efficiency is found for the 20% of Cr-doped TiO2 . These studies propose that the appropriate incorporation of Cr ions makes TiO2 very efficient for visible light-driven photocatalysts required for applications in wastewater treatment. LAY DESCRIPTION: In the present study, nanoparticles of TiO2 and Cr-doped TiO2 have been synthesised by a cost-effective acid-modified sol-gel process. The effect of Cr doping on the microstructure, thermal, magnetic and photocatalytic properties of TiO2 were explored in detail. The transmission electron microscopy (TEM) images exhibit the presence of elongated nanoparticles with an average size of 10 nm. Field emission scanning electron microscopy (FESEM) was used to study the surface morphology of the synthesised materials, which revealed nonuniform morphologies and less aggregation of the particles in the Cr-doped sample. Energy dispersive x-ray spectroscopy (EDS) confirms the elemental compositions with the appropriate stoichiometry of the elements. Raman spectra ensure the phase purity of the materials and also a blue shift with the incorporation of Cr ions in TiO2 . X-ray photoelectron spectra (XPS) predict the chemical state of the elements and oxygen vacancies in the prepared samples. The magnetic nature of all the synthesised samples was examined through the vibrating sample magnetometer (VSM) and revealed weak ferromagnetic behaviour of the samples. These results signify that the oxygen vacancies and defects play a crucial role in developing the ferromagnetic nature of oxide semiconductors. The differential thermal analysis (DTA) shows the structural phase transition at ∼630°C. The photocatalytic performance of the prepared samples was studied for the degradation of methylene blue (MB) dye under irradiation of visible light. A higher photocatalytic efficiency was found for the 20% of Cr-doped TiO2 . These studies propose that the appropriate incorporation of Cr ions makes TiO2 very efficient for visible light-driven photocatalysts required for applications in wastewater treatment.

Enhanced visible light photocatalytic activity of Cr3+-doped anatase TiO2 nanoparticles synthesized by sol–gel method

Physical properties and photocatalytic activity of Cr-doped TiO2 nanoparticles

(001)-Exposed TiO2 Microcrystals Decorated with Few-Layer Nanobelts for Enhanced Photocatalytic Activity

Visible-light simultaneous photocatalysis of methyl orange and Cr(VI) in water by rare earth modified titanium dioxide

Photocatalytic degradation of dyestuff wastewater under visible light irradiation using micron-sized mixed crystal TiO2 powders

Enhanced UV Photoactivity of Ti3+ Self-Doped Anatase TiO2 Single Crystals Hydrothermally Synthesized Using Ti-H2O2-HF Reactants

Enhanced Optical Absorption and Photocatalytic Activity of Cu/N-Codoped Tio2 Nanocrystals

Preparation of nano-sized mixed crystal TiO2-coated Er3+:YAlO3 by sol-gel method for photocatalytic degradation of organic dyes under visible light irradiation

Nanocrystalline Fe/TiO2 Visible Photocatalyst with a Mesoporous Structure Prepared via a Nonhydrolytic Sol-Gel Route

Photocatalysts of Cr Doped Tio2 Film Prepared by Micro Arc Oxidation

Preparation and Photocatalytic Properties of Mo-doped TiO2

Sol–gel auto-combustion synthesis of samarium-doped TiO2 nanoparticles and their photocatalytic activity under visible light irradiation

Preparation of Magnetically Supported Chromium and Sulfur Co-Doped TiO2 and Use for Photocatalysis under Visible Light

Solar photocatalytic degradation of methylene blue in carbon-doped TiO2 nanoparticles suspension

Synthesis and photocatalytic behaviors of Cr 2 O 3 –CNT/TiO 2 composite materials under visible light

Photoinduced hydroxyl radical and photocatalytic activity of samarium-doped TiO2 nanocrystalline

Synthesis and photocatalytic behaviors of Cr<sub>2</sub>O<sub>3</sub>–CNT/TiO<sub>2</sub> composite materials under visible light

Strontium and manganese co-doped TiO2 nanoparticles for the enhanced photocatalytic degradation of methylene blue dye

Preparation of Cr/CNT/TiO 2 composites and influences of Cr particles on the photocatalytic activity under visible light

Degradative and disinfective properties of carbon-doped anatase-rutile TiO2 mixtures under visible light irradiation

Enhancing photocatalytic degradation of methyl orange by crystallinity transformation of titanium dioxide: A kinetic study