Grain Size Effects on Mine Water Quality and Acid/Neutral Rock Drainage Production in Kinetic Testing Using Recsk Porphyry Skarn Cu–Zn Deposit Rocks

Rodrigo Embile,Ingar Walder,Ferenc Madai,Ferenc Móricz,Przemyslaw Rzepka,Patrizia Walder

DOI: https://doi.org/10.1007/s10230-015-0369-x

2015-10-16

Mine Water and the Environment

Abstract:The quality of mine drainage from sulphide-containing waste rock dumps is controlled by several factors. To characterize the effects of grain size on acid/neutral rock drainage production, kinetic tests were performed on samples from the Recsk porphyry skarn Cu–Zn deposit in Hungary, an area known to generate ARD. Five columns were used, each containing specific grain size ranges (1–2, 2–4, 4–8, 8–16, and 16–32 mm). Prior to the kinetic tests, a static test was performed for each grain size range to obtain total and available neutralizing potential (NP) and acid potential (AP). Total NP and AP values were roughly similar for all grain size ranges, while available NP increased as grain size decreased. The neutralization potential ratio for all grain size ranges was <1, which suggests a potentially acid-producing material. The kinetic tests, however, had contrasting results; a grain size of 1–4 mm produced a circumneutral pH, while grain size groups >4 mm produced pHs from 5.1 down to 3.6. Higher alkalinity values in the leach water were linked to the finer grain samples, primarily producing circumneutral pH. Grain size correlated with the sulphate release rate during the stable release period: the sulphate release rate was less at larger grain sizes. In contrast, sulphide oxidation calculated from oxygen consumption was highest for the intermediate grain size range, followed by the coarser and then the finer grains. The leaching of metals established an increasing concentration with increasing acidity without a very clear relationship to grain size. The established concept of increased metal mobility with decreasing pH applies, regardless of grain size.

water resources