Abstract:In this attempt, we have designed novel poly(ester–urethane) (PEU) using poly(di(ethylene glycol)/trimethylolpropane-alt-adipic acid), tolylene-2,4-diisocyanate, and novel diol. Later, PEU has been employed for the fabrication of nanocomposites and foams with hydroxyl-modified montmorillonite (MMT-OH) via in situ polymerization. Afterward, structure and physical properties of PEU/MMT-OH nanocomposites and foams have been explored using various techniques. Physical characteristics of nanocomposites and foams seemed to be dependent upon polyurethane structure, modification of layered silicate and physical interaction between matrix and organoclay platelets. Field emission scanning electron microscopy revealed distorted honeycomb morphology of PEU/MMT-OH 1–5 foams, while PEU/MMT-OH 1–5 nanocomposites depicted dispersed MMT-OH in the matrix. Increased cell density in nanocomposite foams was also observed relative to pure PEU foam. PEU/MMT-OH 5 (5 wt% MMT-OH) foam showed improved tensile strength of 58.1 MPa relative to PEU/MMT-OH 1 foam (56.8 MPa). The density of the foams was also increased (0.7–1.7 g cm −1 ) with clay loading. The 10% thermal decomposition temperature of PEU/MMT-OH 1–5 foams measured by thermogravimetric analysis was in the range of 431–465°C. Percentage of water absorption was also measured for the foam materials. Dynamic mechanical thermal analysis of PEU/MMT-OH 5 foam with 5 wt% nanofiller showed higher glass transition temperature ( T g ) of 129°C relative to PEU/MMT-OH 1 ( T g 116°C). UL 94 and limiting oxygen index results showed that PEU/MMT-OH 1–5 foam had increased nonflammability (V-0 rating) with the clay loading. Silicate layers of MMT-OH were well exfoliated in PEU matrix due to chemical reaction between the hydroxyl of MMT-OH and functional groups of PEU. The morphology, mechanical, thermal, and flame retardant properties of PEU/MMT-OH 1–5 foams were found to be superior to those of PEU/MMT-OH 1–5 nanocomposites.

Processing and properties of poly(ester–urethane)/modified montmorillonite nanocomposite foams derived from novel diol and tolylene-2,4-diisocyanate

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Polyurethane foams based local montmorillonite (magnite) as intumescent materials

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Synthesis and Characterization of Thermoplastic Polyurethane/montmorillonite Nanocomposites Produced by Reactive Extrusion

Thermal and Mechanical Properties of Polyurethane/montmorillonite Nanocomposites Based on a Novel Reactive Modifier

Preparation, thermal and flammability of halogen‐free flame retarding thermoplastic poly(Ether‐Ester) elastomer/montmorillonite nanocomposites

Thermomechanical Behavior Of Polyurethane Nanocomposite Foams Containing Organoclay Particles Modified With Bio-Based Fatty Acid

Reinforcement of Polyurethane Composites with an Organically Modified Montmorillonite

A Study on the Synthesis and Properties of Polyurethane/Clay Nanocomposites

Synthesis, characterization and properties of organoclay-modified polyurethane/epoxy interpenetrating polymer network nanocomposites

Super‐high fraction of organic montmorillonite filled polyamide 6 composite foam: Morphologies, thermal and mechanical properties

Preparation and properties of novel poly(propylene oxide)-block- polylactide-based polyurethane foams

Synthesis and fire properties of rigid polyurethane foams made from a polyol derived from melamine and cardanol

Superlight flame-retardant poly(aryl ether ketone)/polyurea nanocomposite foam with excellent solvent-resistance and shape memory performance

High Thermally Stable Polyurethane Nanocomposite Foam Containing Polydimethyl Siloxane and Carbonaceous Nanofillers

Mechanical and Flame‐resistance Properties of Polyurethane‐imide Foams with Different‐sized Expandable Graphite

Fabrication of green montmorillonite modified bio-based rigid polyurethane foam with improved flame retardancy and enhanced mechanical properties