Abstract:This paper presents the results of a study on removal of Pb 2+ ions by using hydroxyapatite (HAP) scaffold prepared by replication method. To this aim, the effects of suspension solid content and polymeric foam density on the properties of ceramic foam were investigated. The mean total porosity and apparent porosity of the optimized scaffolds were 92.67 % and 92.04 %, respectively. The Taguchi method was performed for designing batch experiments by considering three controllable variables, namely: (1) initial pH of the solution, (2) initial concentration of Pb 2+ ions (C 0 ), and (3) circulating rate of the solution (Ǭ), on the removal efficiency of Pb 2+ ions as the response. Based on the obtained results from the ANOVA analysis, the removal efficiency of Pb 2+ ions was mainly affected by the initial pH of the solution (90.88 %). The highest removal efficiency (99.1 %) of Pb 2+ ions was obtained by optimizing the process under operating conditions of pH = 3.5, C 0 = 50 mg.L −1 , and Ǭ= 0.5 L.min −1 . The Langmuir isotherm model with good accuracy was fitted to the equilibrium results, and the maximum adsorption capacity of 106.38 mg.g −1 was predicted for the HAP scaffold adsorbent. Kinetic studies showed that the mass transfer diffusion steps in the external film and inside the pores are fast, being the adsorption on the adsorbent sites the rate-limiting step of the kinetics, what is plausible given the high porosity of the material. Also, the primary mechanism for Pb 2+ adsorption using HAP scaffold adsorbents was found to be dissolution-precipitation. The fixed-bed column adsorption experiments performed under the predicted optimum conditions of batch experiments. In comparison to the powder adsorbents tested in fixed-bed column, this adsorbent presents several advantages. These include the elimination of the requirement for mechanical separation of the shaped adsorbent from the solution after adsorption, prevention of bed clogging, and its high surface area derived from interconnected open pores.

Synthesis and physicochemical evaluation of hydroxyapatite gel biosorbent for toxic Pb(II) removal from wastewater

Adsorption of Pb (II) Ions onto Hydroxyapatite Nanopowders in Aqueous Solutions

Preparation of Porous Hydroxyapatite Using Cetyl Trimethyl Ammonium Bromide as Surfactant for the Removal of Lead Ions from Aquatic Solutions

Strontium-doped hydroxyapatite as adsorbent effectively to remove lead ions from water

A facile microwave-assisted synthesis of mesoporous hydroxyapatite as an efficient adsorbent for Pb2+ adsorption

An MXene-Grafted Terpolymer Hydrogel for Adsorptive Immobilization of Toxic Pb(II) and Post-Adsorption Application of Metal Ion Hydrogel

Synthesis of hydroxyapatite nanoparticles for the removal of Pb(II) and Cd(II) from industrial wastewaters

3D-printed montmorillonite nanosheets based hydrogel with biocompatible polymers as excellent adsorbent for Pb(II) removal

Synthesis of hydroxyapatite/polyethylene glycol 6000 composites by novel dissolution/precipitation method: optimization of the adsorption process using a factorial design: DFT and molecular dynamic

Surface and mass transfer kinetic and equilibrium modeling of Pb(II) ions adsorption on hydroxyapatite scaffold: Batch and fixed-bed column studies

Performance of oxalate-doped hydroxyapatite as well as relative contribution of oxalate and phosphate for aqueous lead removal

Fast and Highly Efficient Adsorption Removal of Toxic Pb(II) by a Reusable Porous Semi-IPN Hydrogel Based on Alginate and Poly(Vinyl Alcohol)

Manganese-doped hydroxyapatite as an effective adsorbent for the removal of Pb(II) and Cd(II)

Synthesis of polyaminophosphonated-functionalized hydrochar for efficient sorption of Pb(II)

Removal of lead from aqueous solution by hydroxyapatite/magnetite composite adsorbent

Removal of toxic lead from aqueous solution using a low-cost adsorbent

Preparation of hydroxyapatite nanostructures with different morphologies and adsorption behavior on seven heavy metals ions

Recycling of biogenic hydroxyapatite (HAP) for cleaning of lead from wastewater: performance and mechanism

Preparation of novel porous hydroxyapatite sheets with high Pb2+ adsorption properties by self-assembly non-aqueous precipitation method

Three kinds of apatite adsorbents prepared by co-precipitation for Pb (II) and Cd (II) removal from wastewater: performance, competitive effects and mechanisms

Characterization of Lead Uptake by Nano-Sized Hydroxyapatite: A Molecular Scale Perspective