Abstract:Highlights • Processing of cell products poses diverse risks. • The number of particles and falling bacteria was evaluated in laboratory BSCs. • The correlation between 5-μm particles and colony forming unit were observed. • The proportion of falling bacteria was 0.8 ± 0.5 % for textile clothing. • The proportion of falling bacteria was 0.04 ± 0.2 % for non-woven dustless clothing. Introduction To ensure the sterility of cell products that cannot undergo conventional sterilization processes, it is imperative to establish and maintain a clean room environment, regulated through environmental monitoring, including particle counts. Nevertheless, the impact of particles generated by operators as potential contaminants remains uncertain. Thus, in this study, we conducted an accelerated test to assess the correlation between particles generated by operators and airborne bacteria, utilizing biosafety cabinets within a typical laboratory setting. These biosafety cabinets create a controlled environment with air conditioning and high-efficiency particulate air (HEPA) filters, offering fundamental data relevant to cell production. Materials and methods We conducted a simulation followed by real-time experiments involving human operations to explore the quantity of particles, particle sizes, and the percentage of bacteria within these particles. This investigation focused on conditions with heightened particle generation from operators within a biosafety cabinet. The experiment was conducted on operators wearing textile and non-woven dustless clothing within biosafety cabinets. It entailed tapping the upper arms for a duration of 2 min. Results Observations under biosafety cabinet-off conditions revealed the presence of various particles and falling bacteria in textile clothing. In contrast, no particles or falling bacteria were detected in operators wearing dustless clothing within biosafety cabinets. Notably, a correlation between 5 μm particles and colony-forming units in textile clothing was identified through this analysis. The ratio of falling bacteria to the total number of particles within the biosafety cabinet was 0.8 ± 0.5 % for textile clothing, while it was significantly lower at 0.04 ± 0.2 % for dustless clothing. Conclusion This study demonstrated that the number of particles and falling bacteria varied depending on the type of clothing and that quantitative data could be used to identify risks and provide basic data for operator education and evidence-based control methods in aseptic manufacturing areas. Although, this study aims to serve as an accelerated test operating under worst-case conditions, the results need to make sure the study range in general research.

Three distinct surgical clothing systems in a turbulent mixing operating room equipped with mobile ultraclean laminar airflow screen: A numerical evaluation

Numerical Comparison of the Efficiency of Mixing Ventilation and Impinging Jet Ventilation for Exhaled Particle Removal in a Model Intensive Care Unit

Numerical Simulation on Air Distribution and Aerosol Transportation in Operating Room with Unidirectional Flow System under Operational Condition

Management of Hospital Laminar Airflow Operating Rooms

Utilising localised exhaust and air curtain to reduce airborne particle settlement on surgical patients: potential future application in operating rooms?

Evaluation of laminar airflow heating, ventilation, and air conditioning system for particle dispersion control in operating room including staffs: A non-Boussinesq Lagrangian study

Numerical assessment of ceiling-mounted air curtain on the particle distribution in surgical zone

Prevention of surgical site infection under different ventilation systems in operating room environment

Analysis of the airflow features and ventilation efficiency of an Ultra-Clean-Air operating theatre by qDNS simulations and experimental validation

Quantitative Evaluation of the Transmission and Removal of Harmful Smoke Particles in the Operating Room: Full-Scale Experimental and Numerical Study

Source strength as a measurement to define the ability of clean air suits to reduce airborne contamination in operating rooms

A Systems Approach to Assess Transport and Diffusion of Hazardous Airborne Particles in a Large Surgical Suite: Potential Impacts on Viral Airborne Transmission

Experimental Study on Influence of Personnel Activity and Surgical Smoke on Indoor Environment Inside Clean Operating Room

Cleaning performance evaluation of mobile operation shelter under dynamic disturbance

Simulation on interface airflow by occupant's traffic flow through operating room

Applying an air curtain to reduce surgical smoke concentration

Sliding doors: how does their opening affect particulate matter levels in operating theatres?

Numerical Study of Three Ventilation Strategies in a prefabricated COVID-19 inpatient ward

Hospital ventilation simulation for the study of potential exposure to contaminants

Operator-derived particles and falling bacteria in biosafety cabinets

Ventilation-Based Strategy to Manage Intraoperative Aerosol Viral Transmission in the Era of SARS-CoV-2