Abstract:Abstract In the field of stochastic dynamics of marine structures, the determination of long-term extreme responses is a crucial aspect to ensure the desired level of structural reliability. The calculation of these responses requires precise knowledge of the environmental conditions and reliable methods to predict the values associated with a reliability target level. While there is a very precise method to determine the value of these extreme values, e. g. the full long-term analysis (FLTA), this approach is computationally expensive. Then, approximated methods are needed. One practical approach for the determination of the most relevant environmental conditions for extreme calculation is the environmental contour method (ECM). However, some limitations have been detected when this method is used for offshore structures that consider survival strategies e. g. offshore wind turbines (OWT). Lastly, a modified ECM procedure (MECM) has been developed with the purpose to bypass the limitations of the traditional ECM. This method is based on short-term simulations and through an iterative process by testing many environmental contours in the operational range allows finding an important wind speed with its corresponding return period and thus, the problem that traditional ECM has, is avoided. The environmental conditions, which are represented by a large number of parameters, are also an important aspect of extreme calculation. Whereas some of them are treated as stochastic values, some are considered deterministic and, therefore the existence of uncertainties in their measured/estimated values is inevitable. These uncertainties are addressed by adopting values recommended by standards and guidelines and, in practice, it is often necessary to be conservative when there is a lack of information about the specific site studied. Therefore, the understanding of the impact that these uncertainties can have on the loads/responses that govern the design of offshore structures, especially wind turbines, is of great relevance. In this work, the influence of uncertainty in the wind shear coefficient (WSC) is studied. This parameter is directly related to one critical environmental condition i. e. wind speed at hub height, and its influence in power production and fatigue loads has been documented in the literature, but, few cases have addressed their influence in bottom fixed OWT responses. This work seeks to highlight the relevance of an accurate selection of shear coefficient and, its influence on the probabilistic analysis of a bottom fixed OWT taking into account that considerable variations from recommended values may occur. Through the use of coupled simulations in FAST, the NREL 5MW wind turbine will be subjected to varying wind shear conditions, and the corresponding 50-yr long-term responses will be calculated considering the MECM to take into account the influence of the wind turbine survival mode. The extreme values are fitted from a Global Maxima Method (GMM). Finally, it is sought to relate the uncertainty in a relevant input parameter (i. e. WSC) with the uncertainties propagated to the output parameters (i. e. extrapolated long-term extreme responses).

Long-Term Extreme Load Prediction of Spar and Semisubmersible Floating Wind Turbines Using the Environmental Contour Method

Short-term Extreme Value Prediction for the Structural Responses of the IEA 15 MW Offshore Wind Turbine under Extreme Environmental Conditions

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Integrated Numerical Investigation of a 15 MW Semi-Submersible Wind Turbine at Moderate Water Depth

A novel multi-dimensional reliability approach for floating wind turbines under power production conditions

Extreme Response Analysis of a Floating Vertical Axis Wind Turbine Based on Modified Environmental Contour Method

Characterisation of extreme load responses of a 10-MW floating semi-submersible type wind turbine

Estimating Design Loads for Floating Structures Using Environmental Contours

Extended Environmental Contour Methods for Long-Term Extreme Response Analysis of Offshore Wind Turbines1

A Robust Methodology for Predicting Extreme Structural Responses of Offshore Wind Turbines

Response Extremes of Floating Offshore Wind Turbine Based on Inverse Reliability and Environmental Contour Method

Lifetime assessment of semi-submersible wind turbines by Gaidai risk evaluation method

A Comparative Study on Load Assessment Methods for Offshore Wind Turbines Using a Simplified Method and OpenFAST Simulations

Simplified Strength Assessment for Preliminary Structural Design of Floating Offshore Wind Turbine Semi-Submersible Platform

On long-term fatigue damage estimation for a floating offshore wind turbine using a surrogate model

Improved Inverse First-Order Reliability Method for Analyzing Long-Term Response Extremes of Floating Structures

Extreme Load Extrapolation and Long-Term Fatigue Assessment of Offshore Wind Turbine Tower Based on Monitoring Data

Influence of Wind Shear Uncertainty in Long-Term Extreme Responses of an Offshore Monopile Wind Turbine

Probabilistic Response and Short-Term Extreme Load Estimation of Offshore Monopile Wind Turbine Towers by Probability Density Evolution Method

EFFECT OF WIND TURBULENCE ON EXTREME LOAD ANALYSIS OF AN OFFSHORE WIND TURBINE

Long-term fatigue damage assessment for a floating offshore wind turbine under realistic environmental conditions