Abstract:The use of coatings to protect metals from corrosion is currently a common practice. In this study, a double bond-terminated waterborne polyurethane prepolymer was firstly synthesized from polycaprolactone polyol, toluene diisocyanate, dimethylolpropionic acid and hydroxyethyl methacrylate. Then, waterborne polyurethane prepolymer was modified with styrene, butyl acrylate, glycidyl methacrylate, and dodecafluoroheptyl methacrylate though soap-free emulsion polymerization method in order to obtain the crosslinked fluorinated acrylate modified waterborne polyurethane (CFWPUA). The CFWPUA emulsion was used as the matrix resin to prepare the coating with a bar coater, which possesses the characteristics of external hydrophobic surface constructed by long fluorinated side-chains and internal double cross-linking system. The results of infrared spectrum analysis proved the successful synthesis of modified waterborne polyurethane. The energy-dispersive X-ray spectroscopy results showed that the long fluorine side-chains partially migrate to the surface of the coating during the curing process, which leads to the occurrence of fluorine enrichment on the surface. When the glycidyl methacrylate content is 5 wt% and the dodecafluoroheptyl methacrylate content is 7.5 wt%, the water absorption rate of the membrane reduces to 7.9%, the water contact angle of the coating reaches 102.5°, and the gel content is 91%, which proved the successful construction of the double cross-linking system and prevents the penetration of water molecules. The pencil hardness of CFWPUA coating can reach 3H and flexibility and adhesion properties are at the highest level. Most importantly, in the electrochemical impedance spectroscopy test, the modified waterborne polyurethane coating effectively protects Q235 metal substrate from corrosion in the 3.5 wt% NaCl solution, the impedance modulus of CFWPUA coating could be maintained at about 107 Ω·cm2 for a long time, the resistance of CFWPUA coating slowly decreased from 2.124 × 107 Ω·cm2 to 9.605 × 106 Ω·cm2 within 10 days of immersion, two-time constant was generated after 12 days of immersion, which is slightly superior compare to commercial waterborne fluorocarbon coating. The modified waterborne polyurethane coating prepared here shows a potential practical application in the field of metal anti-corrosion.

Preparation and Characterization of Coating Solution Based on Waterborne Polyurethane Dispersion containing Fluorine for Primer on Electro Galvanized Steel Sheet

Preparation and Characterization of Fluorinated Acrylate and Epoxy Co-Modified Waterborne Polyurethane

Preparation and fluorine enrichment behavior of fluorinated polyester

Preparation and characteristics of crosslinked fluorinated acrylate modified waterborne polyurethane for metal protection coating

Preparation and Characterization of the Cross-Linked Fluoro-Silicon Polyacrylate–Polyurethane Hybrid Emulsions for Superior Performance of Waterborne Coatings

Preparation of Environmentally Friendly Anticorrosive Coatings with Aniline Trimer-Modified Waterborne Polyurethane

Synthesis Of Fluoroalkyl-Modified Polyester And Its Application In Improving The Hydrophobicity And Oleophobicity Of Cured Polyester Coatings

Synthesis of poly (propylene carbonate) diol-based waterborne polyurethane modified by epoxy resin with anticorrosion properties

Synthesis and characterization of fluorine-containing polyester based on phthalic anhydride and tetrafluoropropyl glycidyl ether

Preparation and characterization of cross-linked waterborne acrylic /PTFE composite coating with good hydrophobicity and anticorrosion properties

Emulsion homopolymerization of chlorotrifluoroethylene toward new waterborne fluorocarbon coatings

Preparation and application of fluorine-containing acrylate emulsion in two-component waterborne polyurethane coatings

Preparation and properties study of waterborne polyurethane synthesized by mixing polyester diols and isocyanates

Study of a Novel Fluorine-Containing Polyether Waterborne Polyurethane with POSS as a Cross-Linking Agent

Waterborne fluorinated polyurethane containing guanidine for antibacterial and anti-inorganic fouling coatings with improved mechanical properties

Study on the Preparation and Corrosion Resistance Properties of Superhydrophobic Coatings on Galvanized Steel

Synthesis and Properties of Cationic Core-Shell Fluorinated Polyurethane Acrylate

Synthesis and Application of Fluorine-Free Waterborne Polyurethane-Acrylate Water-Repellent Finishing Agent

Synergistic modification of short‐chain fluoro‐alcohol and siloxane end‐capping agents endowing an enhanced superhydrophobic waterborne polyurethane coating

Preparation and Properties of Waterborne Acrylic-Modified Epoxy Phosphate Resin and Its Coating

Preparation, Characterization, and Property Analysis of Environmentally Friendly Waterborne Polyurethane-Acrylate