Abstract:The introduction of anisotropicity is the key step of developing stimuli-responsive polymer hydrogels into intelligent devices. Among these anisotropic materials, hydrogels with oriented structures have attracted tremendous attention. However, most of oriented hydrogels are fabricated through aligning nanofillers or microchannels with external fields. In this work, instead of adding inert materials, we report a facile method to fabricate temperature and pH dual-responsive hydrogels with orientated polymer chains. The hydrogels are based on the interpenetrating network (IPN) of poly(acrylic acid) (PAAc) and poly(acrylamide) (PAAm), which can form temperature- and pH-switchable hydrogen bonds (H-bonds). The two polymerized networks are synthesized sequentially, which allows the application of a stretching force on the primary PAAm network and to "memorize" the orientation through the photopolymerization of the secondary PAAc network. Thanks to the aligned polymer chains and the oriented H-bonds, the obtained gels (i.e., PINSIA) exhibit anisotropic volume phase transition in response to temperature and pH. Due to the bilayer structure generated by the photopolymerization, the directions of the internal stresses of these two layers, that is, the bottom and top layer of the PINSIA gels, are perpendicular, driving the gels to form helices when tailored into narrow strips. Furthermore, the helical structure can be programmed by changing the cutting angle and the width of the gel strip and regulated by switching pH and temperature. This work provides a facile method to construct anisotropic hydrogels that can deform into programmable shapes, which could inspire the design and fabrication of smart hydrogels with potential applications as actuators, information carriers, etc.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.1c02639.SEM of frozen-dried PINSIA-2 gel (Figure S1); azimuthal angle (φ) plots of SAXS (Figure S2), Stress–strain curves of PINSIA-3 gel (Figure S3); swelling properties of IPN and PINSIA-2 gels upon stimuli of temperature and pH (Figure S4); mechanical response upon temperature change of PINSIA-3 gels cut at perpendicular and parallel directions (Figure S5); curvature changes of PINSIA-3 hydrogel strips upon changing pH (Figure S6) (PDF)Video S1. Temperature induced deformation between twisted helix and cylindrical helix in water-bath of 5 and 60 °C (MP4)Video S2. Temperature induced deformation between open helix and closed helix in water-bath of 5 and 60 °C (MP4)Video S3. pH induced deformation between twisted helix and cylindrical helix in buffers of pH 1 and 13 (MP4)Video S4. pH induced deformation between open helix and closed helix in buffers of pH 1 and 13 (MP4)Video S5. pH induced deformation of V-shape helices in buffers of pH 1 and 13 (MP4)Video S6. pH induced deformation of X-shape helices in buffers of pH 1 and 13 (MP4)This article has not yet been cited by other publications.

Rapid 3D Patterning of Poly(acrylic acid) Ionic Hydrogel for Miniature pH Sensors

Study of the Properties of Hydrolyzed Polyacrylamide Hydrogels with Various Pore Structures and Rapid Ph-Sensitivities

DLP 3D Printing of Electrically Conductive Hybrid Hydrogels Via Polymerization-Induced Phase Separation and Subsequent in Situ Assembly of Polypyrrole

Synthesis of Novel pH-Sensitive Poly(methacrylic acid-co-acrylamide)Hydrogels and their Swelling Behavior

Multistimuli-Responsive PNIPAM-Based Double Cross-Linked Conductive Hydrogel with Self-Recovery Ability for Ionic Skin and Smart Sensor.

Rapid-Response and Wide-Range pH Sensors Enabled by Self-Assembled Functional PAni/PAA Layer on No-Core Fiber

Photonic Crystal Ph and Metal Cation Sensors Based on Poly(Vinyl Alcohol) Hydrogel

Sponge‐inspired multisensory hydrogel

A novel method to prepare temperature/pH-sensitive poly (N, N-diethylacrylamide-co-acrylic acid) hydrogels with rapid swelling/deswelling behaviors

Ultrathin Photonic Polymer Gel Films Templated by Non-Close-Packed Monolayer Colloidal Crystals to Enhance Colorimetric Sensing

Rapid gelation of polyacrylic acids-like hydrogel via the dopamine acrylamide-Fe 3+ system and its formation mechanism

pH-sensitive colloidal crystals built from monodisperse poly(St-MMA-SPMAP-AA) microspheres via air-liquid interface assembly

A High Strain, Adhesive, Self-Healable Poly(acrylic Acid) Hydrogel with Temperature Sensitivity As an Epidermal Sensor

Bioinspired Polymeric Photonic Crystals for High Cycling pH-Sensing Performance

A multistimuli‐responsive recyclable poly(vinyl alcohol)/perylene imide hydrogel of high‐performance piezoresistive sensors for human wearable devices

pH‐Sensitive Polyacrylic Acid (PAA) Hydrogels Trapped with Polysodium‐p‐Styrenesulfonate (PSS)

Biomimetic Self-Deformation of Polymer Interpenetrating Network with Stretch-Induced Anisotropicity

One-Step Preparation Of A Highly Stretchable, Conductive, And Transparent Poly(Vinyl Alcohol)-Phytic Acid Hydrogel For Casual Writing Circuits

Acrylamide Hydrogel-Modified Silicon Nanowire Field-Effect Transistors for pH Sensing

In-situ molecular permeation of liquid cationic polymer into solid anionic polymer film enabling self-adaptive adhesion of hydrogel biosensors

Multifunctional acetylated distarch phosphate based conducting hydrogel with high stretchability, ultralow hysteresis and fast response for wearable strain sensors