Abstract:Non-premixed combustion often occurs in practical engines, and it is affected by the coupling effects of chemical kinetics and transport. This study aims to elucidate the individual effect of chemical kinetics, molecular diffusion, and convective transport on non-premixed combustion. To this end, three types of reactive systems are investigated by numerical simulations considering detailed chemistry and transport: (1) thermochemical system: 0D homogeneous autoignition, (2) thermochemical-diffusive system: 1D non-premixed ignition in a static diffusion layer, (3) thermochemical-diffusive-convective system: 1D non-premixed ignition in a counterflow and 2D lifted flame in a coflow. The simulations are carried out for diluted dimethyl ether and hot air under engine-relevant conditions with a pressure of 40 atm and hot air temperatures of 700 & SIM;1500 K. First, homogeneous ignition process of DME/air premixture is investigated. It is found that, apart from the low- and high-temperature chemistry which are essential in the typical two-stage ignition, the intermediate-temperature chemistry can also play an important role, especially for slow reaction process in fuel rich regions. Then, the effects of thermochemical conditions and molecular diffusion are assessed for non-premixed ignition process in the 1D diffusion layer. The results show that, the reaction front always initiates from local autoignition in most reactive regions; then it propagates either in sequential auto-ignition mode or in diffusion-driven mode as a deflagration wave. With various thermochemical conditions, the chemical kinetics behave differently and produce complex multibrachial (tetrabrachial, pentabrachial and hexbrachial) structures during the reaction front propagation. Decreasing the diffusion layer thickness generally delays the reaction front initiation but enhances its transition into a diffusion-driven flame. Finally, it is shown that 1D diffusion layer simulations can qualitatively reproduce the complex multibrachial structures in 1D counterflow and 2D coflow at certain conditions. A regime diagram is proposed to separate the effects of chemical kinetics, molecular diffusion, and convective transport.

A predictive Livengood–Wu correlation for two-stage ignition

Application of Random Forest Machine Learning Models to Forecast Combustion Profile Parameters of a Natural Gas Spark Ignition Engine

An Alternative Approach to Accommodate Detailed Ignition Chemistry in Combustion Simulation

A statistical model to predict ignition probability

On the Prediction of Hot Spot Induced Ignition by the Livengood-Wu Integral

Characterizing Two-Stage Combustion Process in a Natural Gas Spark Ignition Engine Based on Multi-Wiebe Function Model

Simplifying Ignition Delay Prediction For Homogeneous Charge Compression Ignition Engine Design And Control

A Transport Equation Residual Model Incorporating Refined G-Equation and Detailed Chemical Kinetics Combustion Models

The Engine Combustion Phasing Prediction Based on the Support Vector Regression Method

A Forced Ignition Probability Analysis Method Using Kernel Formation Analysis with Turbulent Transport and Lagrangian Flame Particle Tracking

State-of-the-art modeling of two-stage auto-ignition: Turbulence, evaporation and chemistry effects

Construction of One-Step H2/O2 Reaction Mechanism for Predicting Ignition and Its Application in Simulation of Supersonic Combustion

Applicability of High Dimensional Model Representation Correlations for Ignition Delay Times of N-Heptane/air Mixtures

A theoretical analysis of the first stage ignition delay in hydrocarbon oxidation chemistry

EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF TWO-STAGE OIL-LESS IGNITION SYSTEM

On Laminar Premixed Flame Propagating into Autoigniting Mixtures under Engine-Relevant Conditions

An Autoignition Combustion Model for Homogeneous Charge Compression Ignition Engine Cycle Simulations

The Correlation Between the Cylinder Pressure and the Ion Current Fitted with a Gaussian Algorithm for a Spark Ignition Engine Fuelled with Natural-Gas–hydrogen Blends

Correlations for the Ignition Delay Times of Hydrogen/air Mixtures

Numerical Study on Three-Stage Ignition of Dimethyl Ether by Hot Air under Engine-Relevant Conditions

Experimental Study and Numerical Simulation on Ignition Characteristics of Two-stage Gasoline Direct Injection Engine