Abstract:Heat dissipation of electronic devices keeps as a tough issue for decades. As the most classical coolant in a convective heat transfer process, water has been widely adopted which however inherits with limited thermal conductivity and relies heavily on mechanical pump. As an alternative, the room temperature liquid metal was increasingly emerging as an important coolant to realize much stronger enhanced heat transfer. However, its thermal capacity is somewhat lower than that of water, which may restrict the overall cooling performance. In addition, the high cost by taking too much amount of liquid metal into the device also turns out to be a big concern for practical purpose. Here, through combining the individual merits from both the liquid metal with high conductivity and water with large heat capacity, we proposed and demonstrated a new conceptual cooling device that integrated hybrid coolants, radiator and annular channel together for chip thermal management. Particularly, the electrically induced actuation effect of liquid metal was introduced as the only flow driving strategy, which significantly simplified the whole system design. This enables the liquid metal sphere and its surrounding aqueous solution to be quickly accelerated to a large speed under only a very low electric voltage. Further experiments demonstrated that the cooling device could effectively maintain the temperature of a hotpot (3.15 W/cm2) below 55ºC with an extremely small power consumption rate (0.8 W). Several situations to simulate the practical working of the device were experimentally explored and a theoretical thermal resistance model was established to evaluate its heat transfer performance. The present work suggests an important way to make highly compact chip cooling device, which can be flexibly extended into a wide variety of engineering areas.

A Water-cooled Radiator Driven by Memory Alloy

Water Cooling System Design and Thermal Analysis for Electrical Vehicle Driving Motors

Experimental Study On Heat Transfer Characteristics Of Conductive Plastic Ice-On-Coil

Electrically driven chip cooling device using hybrid coolants of liquid metal and aqueous solution

Electromagnetic and Thermal Coupling Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

Thermal characteristics study of a water-cooled permanent magnet linear motor

Optimization of Motor Heat Dissipation Systems Based on Three Dimensional Flow Field Analysis

A Pure Water Circulation Cooling Device on Main Drive Converter of Aluminum Strip Hot Tandem Mill

A Novel Active Cooling System for Internal Combustion Engine Using Shape Memory Alloy Based Thermostat

Self-Driven Electronic Cooling Based on Thermosyphon Effect of Room Temperature Liquid Metal

Research on structure and algorithm of high energy efficiency water chiller

Concept Design And Numerical Evaluation Of A Highly Efficient Rotary Electrocaloric Refrigeration Device

Heat Dissipation System Based on Electromagnetic-Driven Rotational Flow of Liquid Metal Coolant

Liquid Metal Based Miniaturized Chip-Cooling Device Driven by Electromagnetic Pump

Engine Cooling Device of New Energy Vehicle

Test for Thermoelectric Self Cooling

High‐Efficiency Thermal‐Shock Resistance Enabled by Radiative Cooling and Latent Heat Storage

Experimental study of dual-cycle thermal management system for engineering radiator

Design and Optimization Analysis of Composite Water Cooling System Based On High Power Density Motor

Experimental Study on Heat Transfer Characteristics of Thermosyphon Radiator

Hybrid Passive Cooling for Power Equipment Enabled by Metal-Organic Framework