Abstract:Herein, the processing of multi-material vitrimers with heterogenous properties along their x-,y- and z-axis is demonstrated using dual-vat digital light processing (DLP) 3D printing. The printer is based on a conventional vat exchange set-up containing two vats and a cleaning station, which are positioned on a linearly moving platform, and are exchanged automatically during the layer-by-layer build-up of the object. Two thiol-acrylate resins are selected bearing ample -OH and ester moieties, which undergo thermo-activated transesterification in the presence of an organic phosphate as catalyst. Based on the functionality of the acrylate monomers, printing of multi-material structures with flexible ( σ = 1.1 MPa, ε = 14.0%) and rigid ( σ = 33.3 MPa, ε = 4.4%) domains is feasible. A good interlayer adhesion between the soft and hard domains is evidenced by uniaxial tensile tests, whilst optical microscopy is used to study the interface. Dynamic mechanical analysis further shows that the stiffness of the photopolymers varies over several orders of magnitude ( E ' 23°C = 209 kPa - 507 MPa). Jacobs working curves of the two different resins reveal comparable printing parameters at higher exposure doses, which do not only facilitate the printing of multiple materials between individual layers (z-heterogeneity) but also within the same layer (x,y-heterogeneity). This is confirmed by the printing of a multi-material gripper as "proof of concept" demonstrator, which contains soft inner teeth and a stiff outer core. Gripping and releasing of objects is shown by exploiting the glass transition-based shape memory properties of the stiff domains. Moreover, due to the dynamic nature of the covalent bonds, damages inserted into the gripper are intrinsically repairable due to a thermo-activated macroscopic reflow. Shape memory experiments further confirmed that the multi-material gripper fully regains its function after the thermal mending process. Thus, the results clearly show that objects with a high degree of functionality can be realized by combining multi-material 3D printing with the chemistry of vitrimers. This is of particular interest for future soft robotic applications and for mimicking biological composite structures.

Stiffness control in dual color tomographic volumetric 3D printing

Simultaneous Color‐ and Dose‐Controlled Thiol–Ene Resins for Multimodulus 3D Printing with Programmable Interfacial Gradients

Vat Photopolymerization Bioprinting with a Dynamic Support Bath

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Dual‐wavelength vat photopolymerization 3D printing with hybrid acrylate‐epoxy resins: influence of resin composition on microstructure and mechanical properties

3D printing of ultra-high viscosity resin by a linear scan-based vat photopolymerization system

Wavelength Selective Multi-Material 3D Printing of Soft Active Devices Using Orthogonal Photoreactions.

Multi-color dual wavelength vat photopolymerization 3D printing via spatially controlled acidity

Numerical Simulation and Printability Analysis of Fused Deposition Modeling with Dual-Temperature Control

Highly Tunable Thiol‐Ene Photoresins for Volumetric Additive Manufacturing

High-resolution tomographic volumetric additive manufacturing

Object-Space Optimization of Tomographic Reconstructions for Additive Manufacturing

Dual-vat photopolymerization 3D printing of vitrimers

High Fidelity Freeform Manufacturing via Polyspectral Tomographic Reconstruction

Light-oriented 3D printing of liquid crystal/photocurable resins and in-situ enhancement of mechanical performance

Wave optical model for tomographic volumetric additive manufacturing

Printable Multi-Stage Variable Stiffness Material Enabled by Low Melting Point Particles Additives

Tuning the Mechanical Properties of 3D-printed Objects by Mixing Chain Transfer Agents in Radical Promoted Cationic RAFT Polymerization

Tuning the Mechanical Properties of 3D-Printed Objects by Mixing Chain Transfer Agents in Norrish Type I Photoinitiated RAFT Polymerization

Rate-dependent energy dissipation of graded viscoelastic structures fabricated by grayscale vat photopolymerization

Design of enhanced mechanical properties by interpenetrating network of 3D printing dual-curing resins