Production of diesel-like fuel by catalytic co-pyrolysis of waste cooking oil and waste lubricating oil—an alternate energy source
Sajid Muhbat,Farheen Suleman,Syed Muhammad Ali Jilani,Syed Ali Ammar Taqvi,Azry Borhan,Firoz Khan,Thamraa Alshahrani,Farooq Ahmad
DOI: https://doi.org/10.1007/s13399-024-06183-z
IF: 4.05
2024-10-06
Biomass Conversion and Biorefinery
Abstract:The world is currently strongly emphasizing recycling waste materials and transforming them into useful products. The growing energy consumption and waste production necessitate converting these materials into useful products. In the current research, waste cooking oil (WCO) and waste lubricating oil (WLO) are utilized to produce diesel-like fuel using co-pyrolysis, one of the most effective and environmentally friendly methods. By using co-pyrolysis, two or more waste materials can be converted with a positive synergetic effect in a single facility. Current research is focused on the catalytic co-pyrolysis of WCO and WLO to increase the yield and enhance the properties of pyrolytic fuel as compared to non-catalytic co-pyrolysis. Two catalysts, namely bentonite and kaolin clay, were selected based on their cheapness and availability. A total of nine experiments, four with the bentonite and four with the kaolin clay catalysts, were performed at 5%, 10%, 15%, and 20% of each catalyst by weight. One experiment of non-catalytic co-pyrolysis was also performed for comparison with catalytic ones. All the experiments were performed at 450 °C temperature, 2.4 kW power, 7 minutes residence time, and 1 atm pressure in an inert atmosphere produced by nitrogen gas. The raw materials (WCO and WLO) ratio was 1:1 by weight. The properties of the pyrolytic oil such as API gravity, flash point, cetane number, cloud point, and pour point were evaluated using ASTM standards and compared to standard specifications of commercial diesel fuel. Pyrolytic or co-pyrolytic oils obtained from 20 wt.% of bentonite showed the best results in enhancing yield and improving the properties mentioned above. ASTM D86 distillation of the products was also performed to evaluate the diesel fraction of the products. The maximum yield of 75 wt.% and maximum amount of 87 vol.% diesel fraction was obtained at 20 wt.% bentonite with properties very close to or within the range of ASTM standards for commercial diesel fuel.
energy & fuels,engineering, chemical