Abstract:With the fast consumption of traditional fossil fuels and the urgent requirement for a low-carbon economy and sustainable development, supercapacitors are gaining more and more attention as a clean energy storage and conversion device. The research on electrode materials for supercapacitors has become a hot topic nowadays. An electrode material for a supercapacitor, comprising the ZIF-67 in-built carbon-based material, was prepared from a biomass pre-hydrolysate via a hydrothermal process. As a by-product of dissolving slurry, the pre-hydrolysate is rich in carbon, which is an excellent biomass resource. The utilization of pre-hydrolysate to prepare carbon energy materials could realize the high value utilization of pre-hydrolysate and the efficient energy conversion of biomass. Meanwhile, the cobalt-based MOF (such as ZIF-67), as a porous crystalline material, has the advantages of having a regular order, high specific surface area and controllable pore size, as well as good thermal and chemical stability. The addition of ZIF-67 modified the morphology and pore structure of the carbon, and the obtained samples showed outstanding electrochemical performance. One- and two-step synthetic processes generated specimens with a coral-like cross-linked structure and a new type of rough, hollow, dandelion-like structure, respectively, and the pore size was in the range of 2.0–5.0 nm, which is conducive to ion transport and charge transfer. In C2-ZIF-67, the hollow structures could effectively prevent the accumulation of the electrochemical active center, which could provide enough space for the shrinkage and expansion of particles to protect them from the interference of electrolytes and the formation of solid electrolyte interphase film layers. Additionally, the plush tentacle structure with low density and a large specific surface area could expose more active sites and a large electrolyte electrode contact area, and short electron and charge transport paths. Importantly, active, free electrons of small amounts of Co-MOF (1 wt%) could be stored and released through the redox reaction, further improving the electrical conductivity of Carbon-ZIF-67 materials in this work. Consequently, C2-ZIF-67 exhibited superior specific capacitance (400 F g−1, at 0.5 A g−1) and stability (90%, after 10,000 cycles).

Highly Porous Carbon From Azadirachta Indica Leaves and Uio-66 Derived Metal Oxide for Asymmetrical Supercapacitors

A Zinc Cobalt Sulfide Nanosheet Array Derived from a 2D Bimetallic Metal-Organic Frameworks for High-Performance Supercapacitors

A High-Performance Hybrid Supercapacitor with NiO Derived NiO@Ni-MOF Composite Electrodes

NiCo MOF@Carbon Quantum Dots Anode with Soot Derived Activated Carbon Cathode: An Efficient Asymmetric Configuration for Sustainable High‐Performance Supercapacitors

Sheet like ZnCo2O4 microspheres and Pomelo peel waste derived Activated carbon for high performance solid state asymmetric supercapacitor

Hierarchical Cobalt Hydroxide and B/N Co-Doped Graphene Nanohybrids Derived from Metal-Organic Frameworks for High Energy Density Asymmetric Supercapacitors

Engineering triangular bimetallic metal-organic-frameworks derived hierarchical zinc-nickel-cobalt oxide nanosheet arrays@reduced graphene oxide-Ni foam as a binder-free electrode for ultra-high rate performance supercapacitors and methanol electro-oxidation

A novel MOF-derived binary metal oxides and carbon nanocomposite for high-performance symmetric supercapacitor application

Asymmetric Supercapacitors Using Porous Carbons and Iron Oxide Electrodes Derived from a Single Fe Metal-Organic Framework (MIL-100 (Fe))

Bimetal-organic frameworks derived redox-type composite materials for high-performance energy storage

Facile Synthesis of Synergetic MoO2/MoS2@GO Nanohybrid As Energy-Efficient Electrode Material for High-Performance Asymmetric Supercapacitor Applications

Biowaste-Derived Hierarchical Porous Carbon Nanosheets for Ultrahigh Power Density Supercapacitors

In situ construction of metal-organic frameworks on chitosan-derived nitrogen self-doped porous carbon for high-performance supercapacitors

(Digital Presentation) Synthesis and Characterization of ZIF-8@ZIF-67 Bimetallic MOF for Supercapacitor Applications

An insight Into Surface and Diffusion Characteristics of UiO‐66@ZIF‐8 Core–Shell MOF for Asymmetric Supercapacitors with Unprecedented Energy Density

Fabrication of aqueous asymmetric supercapacitor device by using spinel type (FeCoNiCuZn)3O4 high entropy oxide and green carbon derived from plastic wastes

In-Built Fabrication of MOF Assimilated Porous Hollow Carbon from Pre-Hydrolysate for Supercapacitor

Metal–Organic Framework-Derived Bi 2 O 3 /C and NiCo 2 S 4 Hollow Nanofibers for Asymmetric Supercapacitors

An Asymmetric Supercapacitor Based on a NiO/Co3O4@NiCo Cathode and an Activated Carbon Anode

High-Performance Electrodes for a Hybrid Supercapacitor Derived from a Metal–Organic Framework/Graphene Composite

Sustainable conversion of agricultural biomass waste into electrode materials with enhanced energy density for aqueous zinc-ion hybrid capacitors