Abstract:To achieve the loading of the stress path of hard rock, the spherical discrete element model (DEM) and the new flexible membrane technology were utilized to realize the transient loading of three principal stresses with arbitrary magnitudes and orientations. Furthermore, based on the deep tunnel of China Jinping Underground Laboratory II (CJPL-II), the deformation and fracture evolution characteristics of deep hard rock induced by excavation stress path were analyzed, and the mechanisms of transient loading-unloading and stress rotation-induced fractures were revealed from a mesoscopic perspective. The results indicated that the stress–strain curve exhibits different trends and degrees of sudden changes when subjected to transient changes in principal stress, accompanied by sudden changes in strain rate. Stress rotation induces spatially directional deformation, resulting in fractures of different degrees and orientations, and increasing the degree of deformation anisotropy. The correlation between the degree of induced fracture and the unloading magnitude of minimum principal stress, as well as its initial level is significant and positive. The process of mechanical response during transient unloading exhibits clear nonlinearity and directivity. After transient unloading, both the minimum principal stress and minimum principal strain rate decrease sharply and then tend to stabilize. This occurs from the edge to the interior and from the direction of the minimum principal stress to the direction of the maximum principal stress on the ε 1 - ε 3 plane. Transient unloading will induce a tensile stress wave. The ability to induce fractures due to changes in principal stress magnitude, orientation and rotation paths gradually increases. The analysis indicates a positive correlation between the abrupt change amplitude of strain rate and the maximum unloading magnitude, which is determined by the magnitude and rotation of principal stress. A high tensile strain rate is more likely to induce fractures under low minimum principal stress.

Stability analysis of fractured rock mass around underground excavations based on a three-dimensional discrete fracture network

Formation And Development Of Underground Engineering Stable Equilibrium Theory

Stability Analysis of Jointed Rock Mass in Large Underground Caverns Based on Multi-Scale Analysis Method

Effects of fracture network distribution on excavation-induced coupled responses of pore pressure perturbation and rock mass deformation

Directional fracture patterns of excavated jointed rock mass within rough discrete fractures

A discrete fracture network based modeling scheme for analyzing the stability of highly fractured rock slope

Development of a shear strength model for a rock mass containing a complex fracture system based on direct shear tests: a case study

Stability and rockburst tendency analysis of fractured rock mass considering structural plane

Influences of foliation orientation and lateral stress difference on the deformation and fracturing of a thin-layered rock around underground excavations: insight from multi-axial loading tests

Excavation Stress Path Induced Fracturing Mechanism of Hard Rock in Deep Tunnel

Stability analysis of underground surrounding rock mass based on block theory

Study on Discrete Fracture Network Model and Rock Mass Quality Evaluation of Tunnel Surrounding Rock

3D NUMERICAL MODELING OF POSSIBLE FAILURE ZONE WITH UNDERGROUND EXCAVATION

Stability evaluation of rock slope based on discrete fracture network and discrete element model: a case study for the right bank of Yigong Zangbu Bridge

3D DEM simulation of hard rock fracture in deep tunnel excavation induced by changes in principal stress magnitude and orientation

Deformation and Stability Analysis of Surrounding Rock Mass in Deep Underground Cavern Based on Microseismic monitoring and Numerical Modelling

Stability Analysis of Surrounding Rock of an Underground Cavern Group and Excavation Scheme Optimization: Based on an Optimized DDARF Method

Fracture evolution and fracture mechanism of tunnel surrounding rock: A case study based on laboratory tests and theoretical analysis

Rock Mass Stability Investigation Around Tunnels in an Underground Mine in USA

Influence of tunnel excavation on the magnitude and rotation angle of principal stress in surrounding rock

Study the anisotropic behavior of layered surrounding rock based on 3D FDEM method