Abstract:Considering the nonlinearity and uncertainty of a high-speed flexible parallel mechanism,a robust model predictive control strategy was presented to suppress the vibration response of the system.Piezoceramic patch actuator and strain gauge sensors were used.The finite element method and modal truncation technique were applied to obtain the dynamic model of the mechanism.The nonlinear,coupling factors and high-order modal effects existing in the dynamic model of the system were considered as disturbances.The modal force was treated as an uncertain disturbance and the measurement noise was considered.The predictive model of the system dynamic response was introduced and the output was forecasted by the model.A Kalman filter estimator was designed to estimate the state variables of the system.A standard quadratic programming optimization problem was formed where the performance index function minimizes a quadratic performance function.The constraints were the control input voltage and its change rate.The optimization problem was solved to obtain the optimal control output voltages and a rolling optimization control system was then constructed to suppress the vibration response of the system.The optimum placements of the actuators and sensors were determined by using the controllability index featured as actuating energy and the observability index featured as signal energy.Taking a novel 2-DoF parallel mechanism as an example,the experimental modal method was applied to obtain the first two natural frequencies and damping ratios.Comparing with the results obtained by the finite element method,it shows that the theoretical model is not accurate enough.Using dSPACE real-time simulation system and MATLAB/Simulink,the control system was built and the vibration control experimental study was carried out.The experimental results show the proposed controller can effectively suppress the vibration response,and the effectiveness and robustness of the controller was verified.

Novel Distributed PZT Active Vibration Control Based on Characteristic Model for the Space Frame Structure

Discrete Sliding Mode Adaptive Vibration Control for Space Frame Based on Characteristic Model

Non-Uniform Control Moments Induced By A Skew-Quad Actuator Design Applied To Plate Controls

Distributed Modal Identification and Vibration Control of Continua: Piezoelectric Finite Element Formulation and Analysis

Active vibration control strategy based on linear matrix inequality for rotor system

Response Adjustable Performance of a Visco-Elastomer Sandwich Plate with Harmonic Parameters and Distributed Supported Masses under Random Loading

Distributed piezoelectric sensor/actuator design for dynamic measurement/control of distributed parameter systems: A piezoelectric finite element approach

A New Modified Damping Model of Smart Material Structure with PZT Actuator

Nonlinear Axial and Transverse Oscillation and Control of a PZT Laminated Distributed Structronic System

Modified multi-mode positive position feedback controller for active vibration controlof a smart flexible structure

Vibration Control of a Lead Zirconate Titanate Structure Considering Controller–structure Interactions

Active Vibration Control of a High-Speed Flexible Robot Using Variable Structure Control

Active vibration control of a flexible beam based on experimental modal analysis

Vibration suppression of a beam using variable structure control with disturbance observer

Optimum disposition of sensor/actuator for active vibration control of flexible structure

Dynamic Modeling and Vibration Control of a Space Flexible Manipulator Using Piezoelectric Actuators and Sensors

Modeling and Vibration Control of Sandwich Composite Plates

Design, analysis and semi-active control of a quasi-zero stiffness vibration isolation system with six oblique springs

Fixed-Time Event-Triggered Control for a Building-Like Structure With Prescribed Performance

Vibration control of a high-speed flexible parallel mechanism based on model predictive control

Wavelet Control Model of Suppressing Vibration of Beam-Plates with Piezoelectric Sensors and Actuators