Abstract:Polyurethane foam (PUF) is one of the most well-known cellular materials and is widely employed in various industrial and biomedical fields thanks to its many advantages. These include mechanical and material characteristics such as low density and thermal conductivity, and high specific elastic modulus and strength. Despite of these advantages, the PUF has extremely complex material nonlinearity, with changes in density and strain rate, which is a major obstacle to material design and the application of PUF-based structures. PUF has elasto-viscoplastic behavior including three stages of material features, linear elasticity, softening/plateau with stress drop and densification. These phenomena depend strongly on strain rate and density. Therefore, in this study, a phenomenological constitutive model, namely, an elasto-viscoplastic model, was proposed to describe the density- and strain rate-dependent material nonlinear behavior of PUF. The yield surface-independent plastic multiplier, and the hardening- and softening-associated internal state variables proposed by Frank and Brockman, and Zairi et al. were adopted in the constitutive model, respectively. The proposed constitutive model was discretized using the implicit time integration algorithm and was implemented into a user-defined subroutine of the commercial finite element analysis program, ABAQUS. At the same time, a deterministic identification method for material parameters of the constitutive model was introduced to predict the precise material response of PUF under arbitrary densities and strain rates. To do this, the three-dimensional constitutive model was contracted to a one-dimensional equation, and the explicit equation for each material parameter was derived. Then, the strain hardening- and softeningdependent material parameters were calculated using experimental results, such as the work hardening ratestress curve and the yield stress-strain rate curve. After analyzing the obtained material parameters, it was found that the material parameters were strongly dependent on the density and the strain rate. Consequently, the macroscopic material response of PUF, such as a uniaxial compressive stress-strain curve, can be predicted based on the proposed method in this study.

Weibull distribution application on temperature dependence of polyurethane storage modulus

Modeling the Temperature Dependence of Dynamic Mechanical Properties and Visco-Elastic Behavior of Thermoplastic Polyurethane Using Artificial Neural Network

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

A Predictive Parameter for the Shape Memory Behavior of Thermoplastic Polymers

Influence of Thermoviscoelastic Properties and Loading Conditions on the Recovery Performance of Shape Memory Polymers

Viscoelastic Characteristics of Glass Fiber Reinforced Phenolic Materials——A Storage Modulus Modeling Methodology was Developed

Free Volume Based Nonlinear Viscoelastic Model for Polyurea over a Wide Range of Strain Rates and Temperatures

Experimental approach for characterizing the nonlinear, time and temperature‐dependent constitutive response of open‐cell polyurethane foams

A five-parameter fractional derivative temperature spectrum model for polymeric damping materials

Time–temperature Correlations of Amorphous Thermoplastics at Large Strains Based on Molecular Dynamics Simulations

Modeling Energy Storage and Structural Evolution During Finite Viscoplastic Deformation of Glassy Polymers

Radial Basis Function Neural Network-Based Modeling of the Dynamic Thermo-Mechanical Response and Damping Behavior of Thermoplastic Elastomer Systems

Novel hyper-viscoelastic approach to modelling elastomer mechanic behaviour with relaxation spectrum

A General Temperature-Dependent Stress–Strain Constitutive Model for Polymer-Bonded Composite Materials

A Uniform Viscoelastic-Plastic Constitutive Model for MD-PMMA at a Wide Temperature Range

A constitutive model for poly-methyl-methacrylate over a wide range of strain rates and temperatures

A general model for the temperature-dependent deformation and tensile failure of photo-cured polymers

Modeling the Non-linear Viscoelastic Response of High Temperature Polyimides

Experimental and Numerical Analyses of Thermal Failure of Rigid Polyurethane Foam

Investigation of Density- and Strain Rate-dependent Strain Hardening-softening-coupled material Behavior of Polyurethane Foams using Elasto-viscoplastic Constitutive Model

Corrigendum: Model and prediction of stress relaxation of polyurethane ﬁ ber (2018 Mater. Res. Express 5 035308)