Rapid and highly selective removal of cesium by Prussian blue analog anchored on porous collagen fibers
Liangqiong Peng,Lijun Guo,Jiheng Li,Wenhua Zhang,Bi Shi,Xuepin Liao
DOI: https://doi.org/10.1016/j.seppur.2022.122858
IF: 8.6
2022-12-10
Separation and Purification Technology
Abstract:Removing radioactive cesium from wastewaters is necessary for sustainable development of nuclear energy. In this study, a novel adsorbent (PBA-CFs) was successfully fabricated by securely anchoring Prussian blue analog on porous collagen fibers (CFs) crosslinked with Zr 4+ . PBA-CFs showed low pH sensitivity and high adsorption capacity ( q e ) for cesium, with an optimal adsorption pH range of 2–10 and a maximum of 1.32 mmol g −1 . The novel adsorbent also displayed high selectivity for Cs + in the presence of competing ions (K + , Na + , Ca 2+ , Mg 2+ , Sr 2+ , or Co 2+ ). They could effectively remove above 98 % Cs + from tap water, lake water, and mineral water and more than 75 % of Cs + in seawater at the Cs + concentration of 10–60 mg/L. The adsorption process could rapidly reach equilibrium within 30 min and satisfy the pseudo-second-order kinetics model. Adsorption thermodynamics further indicated the process was exothermic, feasible, and spontaneous. Significantly, PBA-CFs exhibited superior adsorption performance in the continuous column process, with q o of 1.53 mmol g −1 . One gram of PBA-CFs could effectively treat 4.03 L (666 BV) of water at a flow rate of 0.3 mL min −1 , with a removal rate beyond 95 %, superior to other common adsorbents. Moreover, 0.1 mol/L NH 4 Cl solution with pH 2 could rapidly regenerate the saturated PBA-CF column. PBA-CFs demonstrated notable irradiation stability after exposure to 10–350 kGy of 60 Co γ-ray. These results demonstrate PBA-CFs are a highly effective and promising adsorbent for the removal of radioactive 137 Cs from wastewater. This work not only provides a feasible method for Cs + removal to facilitate the environmental protection and sustainable development of nuclear energy but also extends the effective application and circular development of CFs as a reproducible biomass resource.
engineering, chemical