Abstract:State of Charge (SoC) is essential in a smart Battery Management System (BMS). Traditional SoC estimation methods consider the lithium battery cell as an isothermal body simplistically, which is not accurate. Due to the heat conduction and convection, the temperature distribution along the radius is nonuniform, which means the battery model parameters subject to temperature are not identical radially. This paper proposed a modified electrochemical-distributed thermal coupled model (MEDTM) for improving the accuracy of SoC estimation. The distributed thermal model is employed to design a robust H-infinity temperature observer for the estimation of the radial temperature distribution of battery cell, where a radial discretized method is used for the realization of the observer design. Based on the observed temperature, a SoC observer is developed with the backstepping method. Finally, experiments and simulation are implemented. The two constant discharging experiments indicate that MEDTM is more accurate than the single particle model with surface temperature (SPMST), and it can generate reliable temperature prediction. A comparative simulation and a constant discharging experiment verify the H-infinity temperature observer can obtain a more accurate estimation of the battery cell's temperature than the luenberger observer, and the H-infinity temperature observer has an estimation error of 0.3 K below. Then, through a constant discharging experiment and a simulation with UDDS current, the proposed SoC observer is verified to accurately estimate the SoC by comparing with the true SoC, where the estimated error of SoC under the two cases is below 1.5% and below 0.4%, respectively. Therefore, the proposed SoC observer also has good performance.

Development of a Matlab/Simulink Model for Monitoring Cell State-of-Health and State-of-Charge via Impedance of Lithium-Ion Battery Cells

Electrochemical-distributed Thermal Coupled Model-Based State of Charge Estimation for Cylindrical Lithium-Ion Batteries

A Novel Correlation-Based Approach for Combined Estimation of State of Charge and State of Health of Lithium-Ion Batteries

Fast State-of-Charge Estimation for Lithium-Ion Batteries Using a Simplified Electrochemical Model Without Initial State Restrictions

Combined State of Charge and State of Health Estimation over Lithium-Ion Battery Cell Cycle Lifespan for Electric Vehicles

State of Health Estimation for Lithium-ion Battery Based on D-UKF

Co-Estimation of State-of-Charge and State-of- Health for Lithium-Ion Batteries Using an Enhanced Electrochemical Model

Novel Low-Complexity Model Development for Li-ion Cells Using Online Impedance Measurement

A New Method to Estimate the State of Charge of Lithium-Ion Batteries Based on the Battery Impedance Model

State of Charge Estimation Based on a Thermal Coupling Simplified First-Principles Model for Lithium-Ion Batteries

An Electrochemistry-Based Impedance Model for Lithium-Ion Batteries

Co-estimating the state of charge and health of lithium batteries through combining a minimalist electrochemical model and an equivalent circuit model

Study on impedance model of Li-ion battery

Interacting Multiple Model for Lithium-Ion Battery State of Charge Estimation Based on the Electrochemical Impedance Spectroscopy

A Comprehensive Physics-Based Equivalent-Circuit Model and State of Charge Estimation for Lithium-Ion Batteries

A voltage reconstruction model based on partial charging curve for state-of-health estimation of lithium-ion batteries

A Fast Impedance Calculation-Based Battery State-of-Health Estimation Method

Electrochemical Model-Based State Estimation for Lithium-Ion Batteries with Adaptive Unscented Kalman Filter

Study on Modeling, Experimentation and State of Charge Estimation of Parallel Connected Lithium-ion Batteries

Novel method for modelling and adaptive estimation for SOC and SOH of lithium-ion batteries