Abstract:Silicon-based composites are recognized as one of the most promising negative electrode materials owing to their high theoretical capacity. However, during (dis)charging, the silicon particles undergo significant volume changes, resulting in electrode thickness variation over the cycle. This maps to the cell scale as a change in cell thickness, which translates into outward pressure. To demonstrate the impact of swelling on the cell thickness variation, a model is developed using the moving boundary approach. The ratios of the composites are classified in detail to accurately analyse the contribution of two materials to the capacity. The impacts of the electrode design, such as the thickness of the active layer and the porosity of the negative electrode, as well as the operating conditions on the electrochemical performance and thickness variation of the cell are also investigated. The capacity contribution increases from 85% to 92% when the silicon content increases, and then changing the electrode structure. When the porosity raises from 40% to 60% and the thickness of the negative active layer increases from 55 μm to 85 μm, the capacity utilization varies from 58% to 79% and from 68% to 59%, respectively. In the rate test, the cell thickness variation reduces from 2.49 μm to 1.56 μm when the rate changes from 0.5 C to 2 C. The expansion/contraction behaviour of the active particles during the lithiation/delithiation process is utilized to investigate the variation of cell thickness under different conditions. The optimized simulation is applied to establish the stress variation model to provide insight into the stress evolution during cycling, which can be employed to more accurately assess the performance and potential risk.

A free volume-based analytical model for plastic flow in thin-walled silicon structures of lithium-ion batteries

Modeling of Coupling Between Free Volume Evolution and Diffusion in Silicon Electrodes of Lithium-Ion Batteries

Sandwich-Lithiation and Longitudinal Crack in Amorphous Silicon Coated on Carbon Nanofibers

Modeling and Simulation of Chemo-Elasto-Plastically Coupled Battery Active Particles

A Chemo-Mechanical Model for Fully-Coupled Lithiation Reaction and Stress Generation in Viscoplastic Lithiated Silicon

Stress evolution with concentration-dependent compositional expansion in a silicon lithium-ion battery anode particle

A Defect-Based Viscoplastic Model for Large-Deformed Thin Film Electrode of Lithium-Ion Battery

Deformation and failure of lithiated Si electrodes of Li-ion batteries

Analytical Model for Sandwich-Lithiation in Hollow Amorphous Silicon Nano-Anodes Coated on Carbon Nanofibers

A Finite Strain Model of Stress, Diffusion, Plastic Flow and Electrochemical Reactions in a Lithium-ion Half-cell

Pressure-sensitive Plasticity of Lithiated Silicon in Li-ion Batteries

Modeling of contact stress among compound particles in high energy lithium-ion battery

Stress-Dependent Chemo-Mechanical Performance of Amorphous Si Anodes for Li-Ion Batteries upon Lithiation

Investigation into Diffusion Induced Plastic Deformation Behavior in Hollow Lithium Ion Battery Electrode Revealed by Analytical Model and Atomistic Simulation

Multi-scale analysis of an electrochemical model including coupled diffusion, stress, and nonideal solution in a silicon thin film anode

A Chemo-Mechanical Model of Lithiation in Silicon

Molecular dynamic investigation of the structure and stress in crystalline and amorphous silicon during lithiation

An mechanical/thermal analytical model for prismatic lithium-ion cells with silicon‐carbon electrodes in charge/discharge cycles

Enhanced Strain Mapping Unveils Internal Deformation Dynamics in Silicon-based Lithium-Ion Batteries During Electrochemical Cycling

Orientation-dependent interfacial mobility governs the anisotropic swelling in lithiated silicon nanowires.

Modelling and analysis of the volume change behaviors of Li-ion batteries with silicon-graphene composite electrodes