Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Evaluation of flammability and shear performance of layered-silicate-reinforced styrenic polymer

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Thermal Degradation and Flammability of Nanocomposites Composed of Silica Cross-Linked to Poly(Methyl Methacrylate)

Polymer/Layered Compound Nanocomposites: a Way to Improve Fire Safety of Polymeric Materials

Fire reaction properties of polystyrene-based nanocomposites using nanosilica and nanoclay as additives in cone calorimeter test

Fire-Safe Polymer Composites: Flame-Retardant Effect of Nanofillers

Morphologies and thermal properties of flame-retardant polystyrene/α-zirconium phosphate nanocomposites

Effects of a phosphorus compound on the morphology, thermal properties, and flammability of polystyrene/MgAl-layered double hydroxide nanocomposites

The influence of typical layered inorganic compounds on the improved thermal stability and fire resistance properties of polystyrene nanocomposites

Mechanical, viscoelastic, and flammability properties of polymer composites reinforced with novel Sirisha bark filler

Preparation of a Novel Styrene Copolymer: Simultaneously Improving the Thermal Stability and Toughness

Recent Progress in Two-dimensional Nanomaterials Following Graphene for Improving Fire Safety of Polymer (Nano)composites

An investigation on the flammability and dynamic mechanical behavior of coir fibers reinforced polymer composites

Nanoreinforcements of Two-Dimensional Nanomaterials for Flame Retardant Polymeric Composites: An Overview

A New Strategy for Simultaneously Improved Flame Retardancy, Thermal Properties, and Scratch Resistance of Transparent Poly(methyl Methacrylate)

Investigation on the preparation and flame retardant mechanism of some polymer/layered compound nanocomposites

Carbon fiber reinforced modified bisphenol-a diglycidylether epoxy composites for flame retardant applications

Thermal Behaviors And Flame Retardancy Of Novel Flame-Retardant, Oil-Filled Styrene-Ethylene-Butadiene-Styrene Block Copolymer-Polypropylene Materials

Fire reaction properties of polystyrene-based composites using hollow silica as synergistic agent

Tunable Thermal, Flame Retardant and Toxic Effluent Suppression Properties of Polystyrene Based on Alternating Graphitic Carbon Nitride and Multi-Walled Carbon Nanotubes

Polyethylene-based single polymer laminates: Synergistic effects of nanosilica and metal hydroxides