Abstract:Abstract It is generally accepted that the fracture strain is dependent on geometry/constraints in metals. However, the currently available implementation of extended finite element method (XFEM) assumes a fixed fracture strain criterion independent of the constraints. The objective of this paper is to develop and implement a variable fracture strain criterion in XFEM that is capable of predicting a wide range of fracture conditions in X65 pipeline steels with various crack tip constraints. Various small-scale tests with different out-of-plane constraints obtained from the literature were simulated using the XFEM in abaqus software. These tests included smooth bar, notched bar, single edge notch tension (SENT), and single edge notch bending (SENB) tests. For each test, the value of the maximum principal strain (Maxpe) as a fracture initiation criterion in the cohesive zone model (CZM) in XFEM framework was varied while keeping the fracture energy constant until the model was able to accurately replicate the reported experimental results. For each test, the crack tip constraints were characterized and the stress triaxialities and Lode angle parameters at the onset of fracture initiation were calculated from the models. The results allowed expressing of the fracture strain as an explicit function of stress triaxiality which was then implemented in abaqus XFEM using UDMGINI subroutine. For the sake of comparison, the tests were simulated in finite element method (FEM) using a similar damage initiation model, namely, the Johnson–Cook (J–C) model. A single model in XFEM was able to accurately replicate the experimental observations for all specimens and compared well to experiments in the way simulated by FEM damage model. However, it was observed that XFEM was more suitable to simulate specimens with pre-existing cracks such as in SENT and SENB tests since the crack grew through elements when mesh refinement was not required around the crack tips. Lastly, the simulated results were found to be less mesh sensitive in XFEM than in FEM damage models.

Numerical Simulation of Three Dimensional Fracture Mechanics Problems of Functionally Graded Pipe and Pipe Bend Using XFEM

A Finite-Volume Implementation of the Phase-Field Model for Brittle Fracture with Adaptive Mesh Refinement

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Simulation of Crack Propagation in API 5L X52 Pressurized Pipes Using XFEM-Based Cohesive Segment Approach

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Numerical Simulations of Arbitrary Evolving Cracks in Geotechnical Structures Using the Nonlinear Augmented Finite Element Method (N-AFEM)

Development X-FEM to investigate crack propagation in inhomogeneous materials

Numerical analysis of quasi-static fracture in functionally graded materials

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Development of X-FEM Methodology and Study on Mixed-Mode Crack Propagation

Modeling quasi-static crack growth with the extended finite element method Part I: Computer implementation

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Nonplanar Crack Growth Simulation of Multiple Cracks Using Finite Element Method

Simulation of Quasi-Static Crack Propagation by Adaptive Finite Element Method

A Unified Fracture Model for X65 Pipeline Material Under Various Constraints Using the Extended Finite Element Method (XFEM)

Analyzing Multiple Crack Propagation Using Extended Finite Element Method (X-FEM)

Three-dimensional dynamic and quasi-static crack growth by a hybrid XFEM-peridynamics approach

Numerical Simulations of Fracture Problems by Coupling the FEM and the Direct Method of Lines

Numerical evaluation of stress intensity factors and T-stress for interfacial cracks and cracks terminating at the interface without asymptotic enrichment

Abaqus implementation of extended finite element method using a level set representation for three-dimensional fatigue crack growth and life predictions

Phase field modelling of crack propagation in functionally graded materials