Abstract:In this study, we investigate the mechanical behavior of large concrete structures affected by the alkali-silica reaction. Particularly, concrete dams are explored. Their permanent contact with water, and thus increased humidity, promotes the ASR. Seasonal variation of the environmental temperature causes different levels of concrete damage in “cold” and “warm” zones. In order to study the behavior of such structures, a thermo-mechanical multi-scale numerical model is developed. It is based on the algorithm proposed by Cuba Ramos [1]. Simulations are performed at the macroand meso-scales, both of which are handled by the finite element method. An elastic thermo-mechanical simulation, performed at the macro-scale, results in a temperature and displacement field. This information at every integration point of the macro-scale is communicated to a corresponding representative volume element (RVE) at the meso-scale. The temperature value is used to determine the gel expansion rate for the following time step. Advancement of the ASR at the level of RVEs leads to gel expansion, deformation of the matrix, and growth of cracks. Given the solution of an RVE problem, homogenized material properties are extracted and communicated to the corresponding integration point of the macro-structure. In the next loading step, the latter behaves according to local states of material throughout a structure. Concrete damaging process is locally driven by gel volume increase, which in its turn depends on the rate of alkali-silica reaction. An equation used to relate the ambient temperature and the amount of available reactants to the gel strain rate is inspired by the Arrhenius law. Parameters of this equation are calibrated based on the experiments by Gautam & Panesar [2]. Cracks in concrete are handled by a continuum damage model. Convergence of the static solution in the presence of multiple cracks is achieved by modification of the sequential linear analysis proposed by Rots and Invernizzi [3]. The cement paste at the meso-scale behaves viscoelastically, which causes relaxation of stresses and reduction in the level of damage. For this purpose, an algorithm coupling the SLA with the general viscoelastic model is developed. REFERENCES [1] Ramos A. I. C., Roux-Langlois C., Dunant C. F., Corrado M., Molinari J.-F. 2018. HPC simulations of alkali-silica reaction-induced damage: Influence of alkali-silica gel properties. Cement and Concrete Research, 109:90 – 102. [2] B. P. Gautam and D. K. Panesar. 2016. A new method of applying long-term multiaxial stresses in concrete specimens undergoing ASR, and their triaxial expansions. Materials and Structures, 49(9):34953508. [3] J. Rots and S. Invernizzi. 2004. Regularized sequentially linear saw-tooth softening model. International Journal for Numerical and Analytical Methods in Geomechanics, 28(7-8):821–856.

Multi-scale concrete model with rate-dependent internal friction

A Dynamic FEM-DEM Multiscale Modeling Approach for Concrete Structures

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

An enhanced beam model incorporating a hysteresis-based solid friction damping mechanism for cementitious materials

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Dynamic Fracture and Dissipation Behaviors of Concrete at the Mesoscale

Two-Dimensional Meso-Scale Simulation of Hydraulic Fracture in Concrete

A 3D multi-phase meso-scale model for modelling coupling of damage and transport properties in concrete

A Multiscale Model for Mechanical and Fracture Behavior of Calcium-Silicate-Hydrate: From Molecular Dynamics to Peridynamics

Dynamic fracture investigation of concrete by a rate-dependent explicit phase field model integrating viscoelasticity and micro-viscosity

A simple extension of Timoshenko beam model to describe dissipation in cementitious elements

A 3D Meso-Scale Model and Numerical Uniaxial Compression Tests on Concrete with the Consideration of the Friction Effect

Multi-scale peridynamic modeling of dynamic fracture in concrete

A fracture energy–based viscoelastic–viscoplastic–anisotropic damage model for rate-dependent cracking of concrete

A unified stochastic damage model for concrete based on multi-scale energy dissipation analysis

Multi-scale modelling of concrete structures affected by alkali-silica reaction: Coupling the mesoscopic damage evolution and the macroscopic concrete deterioration

An image-based meso-scale model for the hygro-mechanical time-dependent analysis of concrete

Micro CT Image-based Simulations of Concrete under High Strain Rate Impact using a Continuum-Discrete Coupled Model

Adaptive Multiscale Homogenization of the Lattice Discrete Particle Model for the Analysis of Damage and Fracture in Concrete

Experiments-based multi-scale modeling of the alkali-silica reaction in concrete

A Static Damage Constitutive Model of Concrete Based on Microscopic Damage Mechanism