Abstract:In light-duty direct-injection (DI) diesel engines, combustion chamber geometry influences the complex interactions between swirl and squish flows, spray-wall interactions, as well as late-cycle mixing. Because of these interactions, piston bowl geometry significantly affects fuel efficiency and emissions behavior. However, due to lack of reliable in-cylinder measurements, the mechanisms responsible for piston-induced changes in engine behavior are not well understood. Non-intrusive, in situ optical measurement techniques are necessary to provide a deeper understanding of the piston geometry effect on in-cylinder processes and to assist in the development of predictive engine simulation models. This study compares two substantially different piston bowls with geometries representative of existing technology: a conventional re-entrant bowl and a stepped-lip bowl. Both pistons are tested in a single-cylinder optical diesel engine under identical boundary conditions. Utilizing high-speed soot natural luminosity (NL) imaging, 20 kHz time-resolved combustion image velocimetry (CIV) technique is developed to quantify the macro-scale motions of soot clouds during the mixing-controlled portion of combustion. Under a part-load conventional combustion regime, CIV-resolved swirl ratio and the tumble-plane projection of velocity fields confirm that the injection-induced redistribution of angular momentum, rather than squish/reverse squish flow, is a dominant source for swirl amplification between two piston geometries. A strong connection has been found between the CIV-resolved combusting flow structure and its succeeding enhanced late-stage burn rate. With SOImain shortly after TDC, combustion in stepped-lip piston exhibits shorter late-burn duration (CA50-CA90) and faster burn rate compared to re-entrant piston. In the same boundary condition, a unique combusting flow structure is observed with CIV in the stepped-lip piston: a long-lasting flow structure with opposing radial velocity directions between the squish region and stepped-lip region. Interestingly, this flow structure is never optically observed with the re-entrant piston. The best hypothesis is that there exists a long-lasting vertical toroidal vortex on the shoulder of stepped-lip piston crown near CA50. A phenomenological model is proposed to provide a partial, but valuable picture of late-stage combusting flow structure which is a key to understand how piston bowl geometry can influence thermal efficiency for swirl-supported diesel engines.

Influence of intake geometry variations on in-cylinder flow and flow–spray interactions in a stratified direct-injection spark-ignition engine captured by time-resolved particle image velocimetry

In-Cylinder Flow and Fuel Spray Interactions in a Stratified Spray-Guided Gasoline Engine Investigated by High-Speed Laser Imaging Techniques

Analysis of the interaction of Spray G and in-cylinder flow in two optical engines for late gasoline direct injection

Experimental Analysis in Dynamics Characteristics of Impinging Spray by a PFI Injector : from Spray Atomization to Fuel Adhesion Formation

Spray formation and spray-wall-flow interaction in a gasoline direct-injection (GDI) engine under early-injection conditions: A flow bench study

An application of tomographic PIV to investigate the spray-induced turbulence in a direct-injection engine

Quantitative mixing measurements and stochastic variability of a vaporizing gasoline direct-injection spray

Spray Dynamics of High Pressure Fuel Injectors for DI Gasoline Engines

Characterization of Direct-Injection Gasoline Sprays under Different Ambient and Fuel Injection Conditions

Three-dimensional imaging of swirled spray injection in a generic aero engine burner under realistic operating conditions

Piston geometry effects in a light-duty, swirl-supported diesel engine: Flow structure characterization

The effect of intake port shape on in-cylinder flow field and turbulence distribution in a high-tumble production engine with endoscope accesses

Investigation of Swirl Ratio Impact on In-Cylinder Flow in an SIDI Optical Engine

The effects of injection pressure and swirl on in-cylinder flow pattern and combustion in a compression–ignition engine

High-Speed Photography of Stratified Combustion in an Optical GDI Engine for Different Triple Injection Strategies

A Study of Piston Geometry Effects on Late-Stage Combustion in a Light-Duty Optical Diesel Engine Using Combustion Image Velocimetry

Swirling flow and spray atomization interactions in a swirl cup airblast fuel injector: Outer swirler effect

Influence of plume arrangement on spray collapsing process in lateral-cylinder-mounted gasoline injectors

Machine learning–based analysis of in-cylinder flow fields to predict combustion engine performance

Quantification of coflow effects on primary atomization of pressure swirl atomizers