High-entropy approach to double perovskite cathode materials for solid oxide fuel cells: Is multicomponent occupancy in (La,Pr,Nd,Sm,Gd)BaCo2O5+δ affecting physicochemical and electrocatalytic properties?
Juliusz Dąbrowa,Anna Stępień,Maria Szymczak,Marek Zajusz,Paweł Czaja,Konrad Świerczek
DOI: https://doi.org/10.3389/fenrg.2022.899308
IF: 3.4
2022-11-23
Frontiers in Energy Research
Abstract:High-entropy (La,Pr,Nd,Sm,Gd)BaCo 2 O 5+ δ double perovskite-type oxide having an equimolar, high-entropy, A-site-layered arrangement of cations is synthesized for the first time. A modified Pechini method, followed by calcination and sintering at 1,100°C helps in obtaining a single-phase, homogenous material with tetragonal I 4 /mmm symmetry. In situ X-ray diffraction and dilatometric studies show excellent phase stability up to 1,100°C in air, with the average thermal expansion coefficient of 23.7∙10 –6 K −1 within the 25–1,100°C range. Total electrical conductivity of the metallic character exceeds 1,600 S cm −1 at room temperature. Equilibrated oxygen content at room temperature is determined as 5.69. The cathodic polarization resistance of the (La,Pr,Nd,Sm,Gd)BaCo 2 O 5+ δ layers, manufactured on the La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 2.8 (LSGM) solid electrolyte of proved inertness, is as low as 0.037 Ω cm 2 at 900°C, and 0.175 Ω cm 2 at 750°C. The determined value of the power density in the LSGM-based, electrolyte-supported (thickness ca. 200 μm) fuel cell reaches 857 mW cm −2 . These results indicate possible applicability of the developed cathode material for solid oxide fuel cells, making it also one of the best-performing high-entropy air electrodes reported until now. However, the determined physiochemical characteristics of the material indicate a relatively limited influence of the high-entropy A-site arrangement in comparison to the conventional analogs, including the synthesized Nd 0.88 Sm 0.12 Co 2 O 5+δ composition, characterized by the same effective radius of the lanthanide cations.
energy & fuels