Abstract:The plasticity of body-centered-cubic metals at low temperatures is substantially determined by the screw-dislocation kinetics. Because the core of screw dislocations in these metals has a non-planar structure, its motion is complex. For example, although density functional theory predicts slip on a {110} plane, the actual slip plane at elevated temperatures differs from the prediction. In this work, we explored state-of-the-art atomistic modeling methods and successfully reproduced the transition of the slip plane through a temperature increase. We then devised an algorithm to analyze the activation of dislocation jump over the Peierls barrier and discovered a possible origin of this unexpected phenomenon: thermal fluctuation leads to the kink-pair nucleation for cross slip jumps with no transition of the dislocation core structure. Transition metals and alloys, such as steels, are ubiquitous in the infrastructure of automobiles, ships, bridges and nuclear power stations. Accordingly, their mechanical degradation may have catastrophic consequences. It is thus essential to understand the plasticity of these materials, which is mainly governed by the dislocation motion. Therefore, having a complete picture of the physics of the dislocation motion is fundamental to understand their mechanical degradation. In body-centered-cubic (BCC) metals, the plastic deformation at low temperatures is accompanied by screw-dislocation glides whose motion occasionally seems complex [ 1 – 3 ]. The non-planer structure of the dislocation core is believed to be responsible for such complexity [ 4 – 6 ]. The threshold barrier for a screw dislocation jump, also known as the Peierls barrier, is so high in BCC metals that the dislocation line is thermally activated from a Peierls energy valley to shift to the next via the kink-pair (or double-kink) nucleation and kink migration [ 7 – 9 ]. This kinetics is understood as a stochastic process and is supposedly represented by an Arrhenius-type rate equation following the transition state theory [ 10 ]: , where γ is the dislocation velocity; γ 0 is a constant; Δ H the Peierls barrier; k the Boltzmann factor; and T the absolute temperature. This stochastic theory is supported by the fact that the brittle-to-ductile transition, regulated by the activation of the screw dislocation motion, follows a stochastic theory [ 11 ]. Even though this theory has been proposed, its detailed understanding remains physically unclear. For example, some experiments reveal that the screw dislocations at low temperatures have a jerky motion [ 12 ] that cannot be explained by the stochastic theory. Moreover, the slip plane switches from {110} to {112} as the temperature increases [ 13 ]. For example, Francioci et al [ 14 ] experimentally found that the slip plane in pure iron (Fe) can be straight on a {112} plane. In addition, Marichal et al observed 'sharp slip' traces on the {112} plane [ 15 ]. Seeger et al [ 16 ] claimed that they succeeded in explaining the presence of the pure {112} plane. However, afterwards the {112} glide plane proved to be an average plane composed of two different {110} glide planes [ 15 , 17 – 19 ], so that the glide occurs in zig–zag order: , refuting the theory of Seeger et al [ 16 ]. Until now, the cause of the appearance of the {112} plane has not been explained. Even with the state-of-the-art technology, there are no experimental means to further analyze and obtain the atomistic understanding of experimental observations, such as the appearance of the {112} plane, because the dislocation trace observations have neither atomic-scale spatial precision nor picoseconds time resolution to observe atomistic events. To explore the fundamental complexity mentioned above, atomistic-scale computational methods are required. First principles calculations based on the density functional theory (DFT) are applied to studies on the stability and mobility of screw dislocations [ 20 ]. For example, some recent reports reveal not only the one-dimensional Peierls barrier of tantalum [ 21 ] and other BCC metals [ 22 ], but also the two-dimensional (2D) Peierls potential in BCC iron [ 18 ], tungsten [ 23 ], and other BCC transition metals -Abstract Truncated-

Descriptions of Dislocation via First Principles Calculations

A Geometric Field Theory of Dislocation Mechanics

Large scale ab-initio simulations of dislocations

Thermodynamic considerations on a class of dislocation-based constitutive models

Analyzing the cross slip motion of screw dislocations at finite temperatures in body-centered-cubic metals: molecular statics and dynamics studies

Dislocation Phenomena Described with Free Volume Concept and Eyring's Rate Process Theory

Dislocation transport and line length increase in averaged descriptions of dislocations

A novel continuum dislocation density field-based crystal plasticity theory

Atomistic origins of continuum dislocation dynamics

Dislocations in uniaxial lamellar phases of liquid crystals, polymers and amphiphilic systems

Three-dimensional elastic displacements induced by a dislocation of polygonal shape in anisotropic elastic crystals

On the Implementation of Dislocation Reactions in Continuum Dislocation Dynamics Modeling of Mesoscale Plasticity

High-Resolution Methods for Characterizing Mesoscale Dislocation Structures

Driving forces on dislocations due to strain gradients and higher order gradients

Self-force of High-Speed Dislocation in Anisotropic Media Based on Configurational Mechanics

Dislocation correlations and the continuum dynamics of the weak line bundle ensemble

First-principles calculations on dislocations in MgO

From anti-Arrhenius to Arrhenius behavior in a dislocation-obstacle bypass: Atomistic Simulations and Theoretical Investigation

Topology and Evolution of Dislocation Structures Mediated by Glissile Reactions in Face-Centered Cubic Metals

Finite Element Approximation of Finite Deformation Dislocation Mechanics