Abstract:As a powerful time-frequency signal analysis technique, empirical mode decomposition (EMD) has been commonly applied in fault diagnosis. However, the cubic spline-curve often causes outstanding over and undershoot problem, which significantly limits the performance of conventional EMD. To address this problem, an improved EMD (I-EMD) based on adaptive weighted rational quartic spline is proposed. Firstly, the original cubic spline interpolation in conventional EMD is replaced with the weighted rational quartic spline interpolation (WRQSI) which has two adjustable shape control parameters. Secondly, a novel parameter selection criterion termed envelope characteristic frequency ratio (ECFR) is designed to guide the construction of the optimal local envelope. And simulation analysis proved that ECFR is not only sensitive to the characteristic information but also robust to the weak noise and sudden impulses. Subsequently, the optimal shape control parameter can be searched by grasshopper optimization algorithm (GOA) using the maximum ECFR as the objective function. Then the sensitive modes selected via weighted Kurtosis index are employed for further Hilbert envelope spectrum analysis. Finally, two case studies on rolling bearing fault diagnosis are constructed to verify the rationality and effectiveness of the I-EMD method. The results show that I-EMD method can evidently solve the over and undershoot problem and restrain the mode mixing phenomenon. Moreover, I-EMD also performs better fault feature extraction ability under the same conditions compared with EMD, VMD and CEEMDAN. So it is expected that I-EMD will serve as a potential improvement for signal processing, fault feature extraction and fault diagnosis.

Railway Wheel Flat Detection Based on Improved Empirical Mode Decomposition

STUDY ON THE AUTOCORRELATION-BASED VIBRATION SIGNAL EMD DECOMPOSITION METHOD IN ROTATING MACHINERY

Study on the EMD-based transverse rotor crack detection

An empirical mode decomposition based method for rolling bearing fault diagnosis

An improved empirical mode decomposition based on adaptive weighted rational quartic spline for rolling bearing fault diagnosis

Detecting Damage of Rolling Bearings Using EMD

Fault Diagnosis of High Speed Train Bogie Based on Ensemble Empirical Mode Decomposition

A Mechanical Fault Detection Strategy Based on the Doubly Iterative Empirical Mode Decomposition

Improved Empirical Mode Decomposition And Its Application To Fault Diagnosis Of Train'S Rolling Bearing

Rail Corrugation Detection of High-Speed Railway Using Wheel Dynamic Responses

Railway Wheel Flat Detection System Based on a Parallelogram Mechanism

Improved VMD for Feature Visualization to Identify Wheel Set Bearing Fault of High Speed Locomotive.

The Application of Frequency Family Separation Method in Rolling Bearing Fault Diagnosis Based on Empirical Mode Decomposition

An Efficient Method for Wheel-Flattened Defects Detection Based on Acoustic Emission Technique

Improved EMD with a Soft Sifting Stopping Criterion and Its Application to Fault Diagnosis of Rotating Machinery

Railway Polygonized Wheel Detection Based on Numerical Time-Frequency Analysis of Axle-Box Acceleration

Rotating Machinery Fault Detection Based on Improved Ensemble Empirical Mode Decomposition.

An Improved Emd Method for Fault Diagnosis of Rolling Bearing

Research on Feature Extraction Strategy Based on Improved Empirical Mode Decomposition Method

Performance Enhancement of Ensemble Empirical Mode Decomposition

In-Service Detection and Quantification of Railway Wheel Flat by the Reflective Optical Position Sensor