Abstract:The development of highly efficient modified electrodes is critical for enhancing the power output of microbial fuel cells (MFCs). In this study, different titanium electrodes were modified with functionalized graphene, polyaniline, and their composite (G/PANI) for use in two-chambered MFCs. The results showed that graphene, polyaniline, and G/PANI modification of the cathode improved the maximum power density of MFCs by 74%, 40%, and 126%, respectively, compared with the unmodified control. Among the three materials, G/PANI modification of the anode resulted in the highest open-circuit voltage of MFCs (0.71 V) and recorded the longest operating time for three consecutive cycles (110 h). G/PANI was superior to the other two materials in terms of power generation and it also extended the duration of the operating cycle of MFCs. G/PANI modification of both the cathode and anode improved the maximum power density of MFCs to 124.84 mW.m(-2); this value was 24.8% and 18.9% higher than those obtained by simple modification of the cathode and the anode, respectively. The duration of the operating cycle of MFCs was also markedly extended to 35 h after G/PANI modification of both the cathode and anode. SEM results revealed that the increase in power generation of MFCs with G/PANI-modified electrodes could be attributed to the high surface area of electrodes and the large number of bacteria attached to electrodes. These results have demonstrated that the G/PANI composite can be effective materials for modifying electrodes and improving power generation in two-chambered MFCs.

Modified Carbon Anode by MWCNTs/PANI Used in Marine Sediment Microbial Fuel Cell and its Electrochemical Performance

Pyrolyzed Iron Phthalocyanine-Modified Multi-Walled Carbon Nanotubes As Composite Anode in Marine Sediment Microbial Fuel Cells and Its Electrochemical Performance

Effect of SnO2/MWCNTs Composite Modified Anode on Electrochemical Performance of Marine Sediment Microbial Fuel Cells

Enhanced Performance of Microbial Fuel Cell with Polyaniline/sodium Alginate/carbon Brush Hydrogel Bioanode and Removal of COD

Polyaniline/Carbon Nanotubes Composite Modified Anode via Graft Polymerization and Self-Assembling for Microbial Fuel Cells

A Novel Anode Modified by 1,5-Dihydroxyanthraquinone/multiwalled Carbon Nanotubes Composite in Marine Sediment Microbial Fuel Cell and Its Electrochemical Performance

Brush-Like Polyaniline Nanoarray Modified Anode for Improvement of Power Output in Microbial Fuel Cell

Effect of carbon nanotube modified cathode by electrophoretic deposition method on the performance of sediment microbial fuel cells

Carbon Nanotube/polyaniline Composite As Anode Material for Microbial Fuel Cells

Efficient Application of New Porous Carbon Nanoparticle Composite Polyaniline Material in Microbial Fuel Cells

Using Graphene/Polyaniline-Modified Electrodes Enhance the Performance of Two-Chambered Microbial Fuel Cells

3D Porous Sponge/Carbon Nanotube/Polyaniline/Chitosan Capacitive Bioanode Material for Improving the Power Generation and Energy Storage Performance of Microbial Fuel Cells

Promoting the Anode Performance of Microbial Fuel Cells with Nano-Molybdenum Disulfide/carbon Nanotubes Composite Catalyst

Enabling fast electron transfer through both bacterial outer-membrane redox centers and endogenous electron mediators by polyaniline hybridized large-mesoporous carbon anode for high-performance microbial fuel cells

3-Aminopropyltriethoxysilane Complexation with Iron Ion Modified Anode in Marine Sediment Microbial Fuel Cells with Enhanced Electrochemical Performance

Preparation and Application of PEDOT/MWCNTs Composite Anode for MFC

Application of Polyaniline-camphorsulfonic Acid Composite Anode in Benthic Microbial Fuel Cells

Power Production Enhancement with Polyaniline Composite Anode in Benthic Microbial Fuel Cells

Composite-Modified Anode by Mno2/Polypyrrole in Marine Benthic Microbial Fuel Cells and Its Electrochemical Performance

Development of a 3D porous sponge as a bioanode coated with polyaniline/sodium alginate/nitrogen-doped carbon nanotube composites for high-performance microbial fuel cells

Graphite Coated with Manganese Oxide/multiwall Carbon Nanotubes Composites As Anodes in Marine Benthic Microbial Fuel Cells