Abstract:The research presents an analysis and comparison of the Taguchi Design and Response Surface Methodology (RSM) in optimizing the laser cutting machine parameters on dimension accuracy for stainless steel products. The paper studies effects of input factors such as cutting speed, nitrogen pressure, power, and frequency on the quality cutting of stainless steel (304) specimens. In this paper, two objectives are examined: targeting laser-cut edge to perpendicular 90 degrees and maximizing the cutting accuracy. The paper proposes a simple formula to optimize both targets by minimizing one new function definition, i.e., dimensional error. An L9 orthogonal array of Taguchi Methodology is adopted to minimize the number of experiments and shorten analysis time to achieve the optimal parameters. These results are compared with RSM. Box–Behnken Design (BBD) type of RSM requires more experiments than the Taguchi approach. RSM regression models as the quadratic functions of the control factors are developed to minimize the dimensional error of cutting products. Then, Analysis of Variance (ANOVA) and graphs will be analyzed to determine the influences of variables on the responses. Both Taguchi's method and RSM found that the most influential factor on dimension accuracy is cutting speed, followed by laser power. While Taguchi provides good graphic visualization for quickly predicting the optimum condition, it cannot examine the interaction effects as RSM due to the lack of data. Besides, RSM reveals the percentage contribution of factors on dimensional error. Cutting speed has a maximum contribution, i.e., 39% of the total. The interaction of cutting speed and power contributes 16% of the total. In this study, RSM can predict optimum conditions more accurately than Taguchi. There are misleading results from the Taguchi method compared with RSM. However, the difference between these objective values is insignificant. The validation experiments show that the Taguchi method can be a practical approach for optimization problems. It can help reduce cost and time and achieve the desired optimal outputs. With cutting problems requiring high precision, the RSM method is highly recommended for identifying optimal parameter settings and interaction effects. With problems that their experimental runs consume high cost and time, Taguchi can be a suitable method for screening the significant variables. Although Taguchi and RSM are used widely for optimization problems in many fields, choosing the right methodology for various objectives is still a concern with different arguments and needs further research. Therefore, this study could be an adequate reference for parameter optimization problems in various fields.

RSM Modelling for Laser Cutting of Shore Wood to Replace Traditional Manufacturing Method

Multi-objective Optimization of Kerf-taper and Surface-roughness Quality Characteristics for Cutting-operation On Coir and Carbon Fibre Reinforced Epoxy Hybrid Polymeric Composites During CO2-Pulsed Laser-cutting Using RSM

Morphology, mechanism and kerf variation during CO2 laser cutting pine wood

Retrofitting ancient timber glulam mortise & tenon construction joints through computer-aided laser cutting

Experimental Investigation of Industrial Laser Cutting: The Effect of the Material Selection and the Process Parameters on the Kerf Quality

A comprehensive review of studying the influence of laser cutting parameters on surface and kerf quality of metals

Experimental analysis on waterjet-guided Nd: YAG laser thin wood machining

Optimization of CNC CO2 Laser Cutting Process Parameters on Acrylic Cutting Using Taguchi Grey Relational Analysis and Response Surface Methodology

Experimental Analysis Of Cut Quality On Ss347 Material Using Co2 Assisted Laser Beam Cutting And Parametric Optimization Using Genetic Algorithm

Optimization of Process Parameters for Laser Cutting Process of Stainless Steel 304: A Comparative Analysis and Estimation with Taguchi Method and Response Surface Methodology

Problems of Quality Assurance and Selection of Control Criteria in Laser Cutting Operations of Wood and Wood-Like Materials

Anatomical and morphological characteristics of beech wood after CO2-laser cutting

An applicable review on recent laser beam cutting process characteristics modeling: geometrical, metallurgical, mechanical, and defect

Investigation on Cutting Power of Wood–Plastic Composite Using Response Surface Methodology

Evaluation of the Surface Irregularities of the Cross-Section of the Wood after CO2 Laser Cutting

Experimental Analysis of Kerf Taper Angle in Cutting Process of Sugar Palm Fiber Reinforced Unsaturated Polyester Composites with Laser Beam and Abrasive Water Jet Cutting Technologies

Experimental investigation of sawing approach of low power fiber laser cutting of titanium alloy using particle swarm optimization technique

Experimental investigation on abrasive water jet machining of neem wood plastic composite

An Exploratory Study of Laser Scribing Quality through Cross-Section Scribing Profiles

Experimental Evaluation of Cutting Quality of Carbon Fibre Reinforced Polymer with Pulsed Laser

Process optimization and performance verification of CFRP laser surface modification