Abstract:Due to the complex working medium of oil in construction engineering, the waterproof valve in mixing machinery can easily cause different degrees of failure. Moreover, under adverse working conditions and complicated noise backgrounds, it is very difficult to detect the fault of waterproof valves. Thus, a fault diagnosis method is proposed, especially for the fault detection of waterproof valves as a key component in the construction of mixing machinery. This fault diagnosis method is based on a new adaptive feature extraction model, with multi-path signals to the improved deep residual shrinkage network–stacked denoising convolutional autoencoder (named DRSN–SDCAE). Firstly, the noisy vibration signals collected by the two vibration sensors are preprocessed, and then transmitted to the parallel structure improved DRSN–SDCAE for adaptive denoising and feature extraction. Finally, these results are fused through the feature fusion strategy to realize the effective fault diagnosis of the waterproof valve. The effectiveness of this method was verified through theory and experiments. The experimental results show that the proposed fault diagnosis method based on the improved DRSN–SDCAE model can automatically and effectively extract fault features from noise for fault diagnosis without relying on signal processing technology and diagnosis experiences. When compared with other intelligent fault diagnosis methods, the features extracted from multi-path inputs were more comprehensive than those extracted from single-path inputs, and contained more complete features of hidden data, which significantly improved fault diagnosis accuracy based on these fault features. The contribution of this paper is to learn fault features autonomously in signals with strong and complex noise through a deep network structure, which extends the fault diagnosis method to the field of construction machinery to improve the safe operation and maintainability of engineering machinery.

A Fault Feature Extraction Method Based on LMD and Wavelet Packet Denoising

Application of Morphological Wavelet De-noising in Extracting Gear Fault Feature

Rolling Bearing Fault Feature Extraction Based on Morphological Wavelet and S-transform

Fault Feature Extraction of Rolling Element Bearing Based on Morphological Undecimated Wavelet Decomposition

Feature Extraction Of Impulse Faults For Vibration Signals Based On Sparse Non-Negative Tensor Factorization

On Fault Feature Extraction of a Gear by Complex Morlet Wavelet Transform and Coefficient Correlation

Fault Feature Extraction of Automobile Main Reducer Based on Complex Morlet Wavelet Transform

Fault Diagnosis Based On Wavelet Package For Hydraulic Pump

Fault Diagnosis Method Based on AUPLMD and RTSMWPE for a Reciprocating Compressor Valve

A Novel Approach of Feature Extraction for Analog Circuit Fault Diagnosis Based on WPD-LLE-CSA

A Method of Bearing Fault Feature Extraction Based on Improved Wavelet Packet and Hilbert Analysis

Adaptive Fault Feature Extraction Based on Stationary Wavelet Packet Decomposition and Hilbert Transform

A Fault Feature Extraction Method Based on Improved VMD Multi-Scale Dispersion Entropy and TVD-CYCBD

Research on Common Fault Diagnosis of Mud Pump Based on Wavelet Packet Analysis

Application of Wavelet Packet and Mahalanobis-Taguchi System for Hydraulic Pump Fault Diagnosis

Fault feature extraction for rolling bearings based on parameter-adaptive variational mode decomposition and multi-point optimal minimum entropy deconvolution

Fault Diagnosis Method of Waterproof Valves in Engineering Mixing Machinery Based on a New Adaptive Feature Extraction Model

Experimental study of hydraulic cylinder leakage and fault feature extraction based on wavelet packet analysis

Fault Diagnosis for Hydraulic Pump Based on EEMD-KPCA and LVQ

A Fault Diagnosis Method for Electric Check Valve Based on ResNet-ELM with Adaptive Focal Loss

Wavelet Packet Images Matching Applied to Noise Faults Diagnosis