Abstract:Lead-free flexible piezoelectric and triboelectric nanogenerators are sought after due to their ability to produce electricity by harnessing wasteful mechanical energy. A comprehensive understanding of additives and processing techniques is crucial for fine-tuning the performance of such energy systems. We have investigated in detail the effect of the addition of reverse microemulsion synthesized barium tungstate nanorods (BWN) on morphology, crystallinity, polymorphism of electrospun nanofabrics of poly(vinylidene fluoride) (PVDF). The electroactive phase content of the nanofabrics was enhanced upon the addition of BWN and the highest electroactive phase content of 86.5% was observed in the nanofabric containing 3 wt% of BWN. The dielectric constant of the nanofabric containing 5 wt% BWN was ~1.96 times higher than that of pristine PVDF nanofabric (EPVDF). The ratio of relative change in the capacitance to initial capacitance of the sensor fabricated from the same system was ~4 times greater than that of EPVDF. Consequently, its piezoelectric and triboelectric performances were improved. The piezoelectric nanogenerator fabricated using the nanofabric containing 3 wt% BWN produced the highest open-circuit voltage of 8 V under an applied load of 8 N. A triboelectric nanogenerator made using the same system was able to produce a voltage output of 200 V, which was 1.77 times as high as that of EPVDF under one-finger tapping in contact-separation mode. The same composite nanofabric produced piezoelectric and triboelectric power densities of 4.3 μW/cm2 and 646 μW/cm2, respectively. The triboelectric nanogenerator was able to light forty LEDs under one finger tapping. Fluttering-driven triboelectric nanogenerator fabricated using the aforementioned nanofabric was able to produce a triboelectric voltage of 84 V at a wind speed of 7 m/s. Overall, these nanofabrics could be a potential material for energy harvesting devices for powering wearable devices, environmental sensors, and internet of things.

Fabrication of self-healing hybrid nanogenerators based on polyurethane and ZnO for harvesting wind energy

A Self-Supported Structure Hybrid Triboelectric/piezoelectric Nanogenerator for Bio-Mechanical Energy Harvesting and Pressure Sensing

Hybrid piezoelectric nanogenerator based on PVDF film and vertically aligned ZnO nanorods for energy harvesting applications

Ultraviolet-protecting, flexible and stable photovoltaic-assisted piezoelectric hybrid unit nanogenerator for simultaneously harvesting ultraviolet light and mechanical energies

Hybridized Triboelectric‐Electromagnetic Nanogenerator for Wind Energy Harvesting to Realize Real‐Time Power Supply of Sensor Nodes

Remarkably enhanced hybrid piezo/triboelectric nanogenerator via rational modulation of piezoelectric and dielectric properties for self-powered electronics

A hybrid nanogenerator based on wind energy harvesting for powering self-driven sensing systems

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

R-Shaped Hybrid Nanogenerator with Enhanced Piezoelectricity.

Intelligent Sensing System Based on Hybrid Nanogenerator by Harvesting Multiple Clean Energy

A High‐Performance Flexible Arch‐Shaped Tribo‐Piezoelectric Hybrid Nanogenerator for Energy Harvesting

A Wind‐Driven Poly(tetrafluoroethylene) Electret and Polylactide Polymer‐Based Hybrid Nanogenerator for Self‐Powered Temperature Detection System

Electrospun PVDF-MoSe 2 nanofibers based hybrid triboelectric nanogenerator for self-powered water splitting system

A Wave-Shaped Hybrid Piezoelectric and Triboelectric Nanogenerator Based on P(VDF-TrFE) Nanofibers.

A collision-free gallop-based triboelectric-piezoelectric hybrid nanogenerator

Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics

A wind-driven rotating micro-hybrid nanogenerator for powering environmental monitoring devices based on a brush-type triboelectric unit

Continuously harvesting energy from water and wind by pulsed triboelectric nanogenerator for self-powered seawater electrolysis

Multilayered Flexible Nanocomposite for Hybrid Nano- Generator Enabled by Conjunction of Piezoelectricity and Triboelectricity

Enhanced Hybrid Nanogenerator Based on PVDF-HFP and PAN/BTO Coaxially Structured Electrospun Nanofiber

Enhancement in energy storage and piezoelectric performance of three phase (PZT/MWCNT/PVDF) composite