Abstract:This research presents a numerical and analytical investigation on the structural characteristics of concrete-filled steel tubular flange beams (CFSTFBs) prestressed using steel strands under bending. CFSTFBs are found to benefit from higher flexural and shear strength compared to those of I-section beams with flat flanges. The geometrical configurations of these sections provide them with higher web local buckling resistance due to a larger flange depth-to-width ratio. A large number of existing structures, constructed with steel-concrete composite beams, need to be retrofitted due to many factors such as loss of strength as a result of service loads and environmental conditions. A potentially economical and feasible approach to strengthening these beams is upgrading them using steel prestressing strands. The finite element (FE) approach was utilized to develop a three-dimensional numerical model considering both material and geometrical nonlinearity. Accordingly, the effects of concrete strength, tubular flange shape and dimension, steel yield stress, and quantity and eccentricity of strands were included in the analysis. A simplified model, on the basis of the plastic stress distribution method (PSDM), was used to estimate the ultimate moment capacity. In order to visualize the influence of steel and concrete strength and tubular flange size on the moment capacity of CFSTFBs, several artificial intelligence (AI) algorithms were employed and a partial dependence analysis was also conducted accordingly. The ultimate capacities obtained by analytical and FE models, considering the effect of confinement, were verified by comparing the predictions with the results from experimental studies. Both analytical and FE results indicated that the prestressing strands are significantly capable of enhancing the stiffness and strength of CFSTFBs under flexural loading. It was demon-strated that the tube geometric properties can significantly control the overall performance of prestressed CFSTFBs. The results also indicated a negligible effect of the concrete compressive strength.

Prediction for Effective Flange Width of Steel–Concrete Composite Beam with TALHGs

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

Effective flange width for calculation of the deformation of steel-concrete composite frame beams

Effective flange width of steel–concrete composite beam with partial openings in concrete slab

Effective Flange Width Based on Equivalence of Slab Crack Width at Hogging Moment Region of Composite Frame Beam

Study on effective flange width of end of composite frame beam with non-symmetrical steel section at ultimate limit state

Experimental study of an innovative steel-concrete composite beam under hogging moment

Experimental Study of Innovative Steel-Concrete Composite Beams under Hogging Moment

Mechanical Behavior of Steel–HFRC Composite Girders

Lateral-torsional buckling behaviour of concrete-filled high-strength steel tubular flange beams under mid-span load

Calculation of Long-Term Slippage for Externally Prestressing Steel-Concrete Composite Beam

Effective Width of Steel–concrete Composite Beam at Ultimate Strength State

Flexural behavior of prestressed concrete-filled steel tubular flange beams

Analysis of effective flange width on composite steel-concrete beams with openings in concrete slab

Deflection prediction of assembly integral steel-concrete floor voided with steel mesh boxes

Shear Contribution Of Flange Dowel Action In Steel-Concrete-Steel Composite Structures

Bearing Behavior of H-Shaped Honeycombed Steel Web Composite Columns with Rectangular Concrete-Filled Steel Tube Flanges under Eccentrical Compression Load

Analytical behavior of frames with steel beams to concrete-filled steel tubular column

Analysis of effective width of simply supported composite slim floor

Analysis of Flange Effective Distribution Width of New Type of GFRP Composite Beam

Stability of Steel–concrete Composite Beams with Full Openings in Concrete Flange