Abstract:Ubiquitous computing has enabled the proliferation of low-cost solutions for capturing information about the user's environment or biometric parameters. In this sense, the do-it-yourself (DIY) approach to build new low-cost systems or verify the correspondence of low-cost systems compared to professional devices allows the spread of application possibilities. Following this trend, the authors aim to present a complete DIY and replicable procedure to evaluate the performance of a low-cost video luminance meter consisting of a Raspberry Pi and a camera module. The method initially consists of designing and developing a LED panel and a light cube that serves as reference illuminance sources. The luminance distribution along the two reference light sources is determined using a Konica Minolta luminance meter. With this approach, it is possible to identify an area for each light source with an almost equal luminance value. By applying a frame that covers part of the panel and shows only the area with nearly homogeneous luminance values and applying the two systems in a dark space in front of the low-cost video luminance meter mounted on a professional reference camera photometer LMK mobile air, it is possible to check the discrepancy in luminance values between the low-cost and professional systems when pointing different homogeneous light sources. In doing so, we primarily consider the peripheral shading effect, better known as the vignetting effect. We then differentiate the correction factor S of the Radiance Pcomb function to better match the luminance values of the low-cost system to the professional device. We also introduce an algorithm to differentiate the S factor depending on the light source. In general, the DIY calibration process described in the paper is time-consuming. However, the subsequent applications in various real-life scenarios allow us to verify the satisfactory performance of the low-cost system in terms of luminance mapping and glare evaluation compared to a professional device.

Ubiquitous luminance sensing using the Raspberry Pi and Camera Module system

CCD-based system for two-dimensional measurement of color uniformity of LCD projector

Assessment of the Performance of a Portable, Low-Cost and Open-Source Device for Luminance Mapping through a DIY Approach for Massive Application from a Human-Centred Perspective

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Compressive Single-Pixel Hyperspectral Imaging Using RGB Sensors

Measurement of Led Spatial Intensity Distribution Using Imaging

Flat-Field and Colour Correction for the Raspberry Pi Camera Module

A portable Raspberry Pi-based spectrometer for on-site spectral testing

Laying the foundation to use Raspberry Pi 3 V2 camera module imagery for scientific and engineering purposes

Digital Camera-Based Appearance Meter (AppMeter)

Obtaining Absolute Scene Luminance Using HDR Imaging

An integrated light management system with real-time light measurement and human perception

Imagery dataset of interior and exterior northern architectural spaces for photobiological lighting analyses

Intelligent Luminance Control of Lighting Systems Based on Imaging Sensor Feedback

A Luminance-Based Lighting Design Method: A Framework for Lighting Design and Review of Luminance Measures

The Photometric Testing of High-Resolution Digital Cameras from Smartphones—A Pilot Study

Embedded Microcontroller with a CCD Camera as a Digital Lighting Control System

Methods for Measuring Viewing Parameters in CIECAM02.

Human-centric light sensing and estimation from RGBD images: The invisible light switch

On the use of a consumer-grade 360-degree camera as a radiometer for scientific applications