Abstract:In this work a hardware-in-the-loop (HiL) simulator of a novel micro combined heat and power system is presented and its use for control algorithm optimization is demonstrated and discussed. The plant under investigation consists of a concentrated Linear Fresnel Reflectors solar field, a 2 kWe/18 kWt Organic Rankine Cycle unit and an advanced latent heat thermal energy storage tank equipped with reversible heat pipes as developed by a consortium of universities and companies within the EU funded project Innova Microsolar. A smart control unit manages their integration and monitors the operation of each subsystem. In order to support the optimization of the control algorithms and the definition of the best control strategy of the micro-CHP plant at different working conditions, a simulation framework based on Matlab/Simulink has been developed by the authors and connected to the real control unit according to a HiL approach. Ad-hoc models of the different subsystems together with those of the components (i.e. valves and variable speed pumps) regulating the plant operation have been included. The use of the HiL simulator has permitted to optimize the control logic of the integrated plant prior to its future commissioning, thus helping to overcome some of the technical and reliability issues occurring during the setup of the real system. In particular, the HiL has allowed: (i) to define the proportional and integral gains of the diverters in order to assure a robust and fast response of the plant during the switch among the different operation modes; (ii) to prove the limits of acting on the oil pump flow rate in assuring the nominal oil temperature at the inlet of the ORC unit, due to the inherent fluctuations caused by this control strategy; and (iii) to assess the best control strategy which is obtained by acting on the aperture of the diverter which controls the oil mass flow rate to the ORC unit. Hence, the scientific approach here proposed can be extended also to many other complex energy conversion systems in order to significantly reduce the potential critical issues during their commissioning.

Real-Time Hardware-in-the-Loop Simulation of Multiphase DC/DC Converters

Real-Time Thermal Evaluation of Power Converters in Microgrids by Device Current Reconstruction

Development of a hardware-in-the-loop simulator for small-scale concentrated solar combined heat and power system

Analyses and Design of a High Power Bidirectional 48V-12V DCDC Converter System for Electric Vehicle Application.

Theoretical Comparison, Real-Time Emulation, and Experiment Validation of DC/DC Converter for Fuel Cell Electric Vehicle

A Two Stage DC/dc Converter with Wide Input Range for EV

Dc-Link Ripple Suppression of Cascaded H-Bridge Based MV Grid Emulator Apparatus for Analysis and Testing of Grid-Tied Converters in Distribution System

Event-Driven Controller Hardware-In-The-Loop Simulation for Modular Multilevel Converters

Real-Time Simulation of Power Electronic Systems Based on Predictive Behavior

Hardware-in-the-loop Real-Time Platform for More Electric Aircraft

High Power High Voltage Gain Interleaved Dc-Dc Boost Converter Application

Hardware In The Loop Simulation Of Vehicle Controller Unit For Fuel Cell/Battery Hybrid Bus

Development of a Hardware-in-the-loop Simulation System for Hybrid Electric Vehicle Performance Test

Emulation and Testing for Automotive Propulsion Drive Using Two Cascaded Inverters

Research on hardware-in-the-loop simulation for hybrid powertrain

Real-Time Simulation of Level 1, Level 2, and Level 3 Electric Vehicle Charging Systems

Simulink And Vc-Based Hardware-In-The-Loop Real-Time Simulation For Ev

New Interleaved-Input Double Float-Output DC/DC Converter Topology for Battery- Based EVs: Design, Modeling, Analysis and Experimental Implementation

Real-Time Simulation and Hardware-in-the-Loop Testing Based on OPAL-RT ePHASORSIM: A Review of Recent Advances and a Simple Validation in EV Charging Management Systems

Unified Real-Time Simulation Method for DC/DC Conversion Systems Consisting of Cascaded Dual-Port Submodules

Modeling and Simulation of Parallel Dc/Dc Converters for Online Ac Impedance Estimation of Pem Fuel Cell Stack