Abstract:Positioning systems are used in a wide range of applications which require determining the position of an object in space, such as locating and tracking assets, people and goods; assisting navigation systems; and mapping. Indoor Positioning Systems (IPSs) are used where satellite and other outdoor positioning technologies lack precision or fail. Ultra-WideBand (UWB) technology is especially suitable for an IPS, as it operates under high data transfer rates over short distances and at low power densities, although signals tend to be disrupted by various objects. This paper presents a comprehensive study of the precision, failure, and accuracy of 2D IPSs based on UWB technology and a pseudo-range multilateration algorithm using Time Difference of Arrival (TDoA) signals. As a case study, the positioning of a 4×4m2 area, four anchors (transceivers), and one tag (receiver) are considered using bitcraze's Loco Positioning System. A Cramér-Rao Lower Bound analysis identifies the convex hull of the anchors as the region with highest precision, taking into account the anisotropic radiation pattern of the anchors' antennas as opposed to ideal signal distributions, while bifurcation envelopes containing the anchors are defined to bound the regions in which the IPS is predicted to fail. This allows the formulation of a so-called flyable area, defined as the intersection between the convex hull and the region outside the bifurcation envelopes. Finally, the static bias is measured after applying a built-in Extended Kalman Filter (EKF) and mapped using a Radial Basis Function Network (RBFN). A debiasing filter is then developed to improve the accuracy. Findings and developments are experimentally validated, with the IPS observed to fail near the anchors, precision around ±3cm, and accuracy improved by about 15cm for static and 5cm for dynamic measurements, on average.

Channel-Quality-Evaluation-Based Anchor Node Selection for UWB Indoor Positioning

Indoor scenario-based UWB anchor placement optimization method for indoor localization

Anchor selection for UWB indoor positioning

A multi-node collaborative and iterative UWB localisation algorithm for indoor complex environments

An Indoor UWB NLOS Correction Positioning Method Based on Anchor LOS/NLOS Map

Optimized Anchor Node Selection Algorithm Considering Power and Accuracy for Indoor Integrated Navigation System Based on Ins/Uwb

Analysis and Improvement of Indoor Positioning Accuracy for UWB Sensors

UWB System for Indoor Positioning and Tracking with Arbitrary Target Orientation, Optimal Anchor Location, and Adaptive NLOS Mitigation

Design a novel algorithm for enhancing UWB positioning accuracy in GPS denied environments

A Method for Improving UWB Indoor Positioning

An Emergency Seamless Positioning Technique Based on ad hoc UWB Networking Using Robust EKF

Research on Inertial Navigation and Environmental Correction Indoor Ultra-Wideband Ranging and Positioning Methods

High Precision Indoor Positioning System Based on UWB/MINS Integration in NLOS Condition

Research on UWB Indoor Positioning Algorithm under the Influence of Human Occlusion and Spatial NLOS

Multipath-Assisted Single-Anchor Localization Via Deep Variational Learning

Error Mitigation for TDoA UWB Indoor Localization using Unsupervised Machine Learning

Anchor Self-Localization Algorithm Based on UWB Ranging and Inertial Measurements

Hybrid IMU/UWB Cooperative Localization Algorithm in Single-Anchor Networks

Survey on NLOS Identification and Error Mitigation for UWB Indoor Positioning

Analysis and Accuracy Improvement of UWB-TDoA-Based Indoor Positioning System