Abstract:Lithium–sulfur batteries (LSBs) have drawn tremendous attention for their superior theoretical energy density. Nevertheless, the "shuttle effect" originating from the dissolution and migration of lithium polysulfide (LiPS) in electrolytes limits the cycling stability of LSBs. To deal with this challenge, a biopolymer network PPG with a three-dimensional (3D) cross-linked structure, on the basis of guar gum (GG), phytic acid (PA), and soy protein isolate (SPI), has been explored as a cathode binder for LSBs. The robust adsorption ability to capture LiPS presented by the PPG binder has been demonstrated through the ultraviolet–visible (UV–vis) measurement and further been certified by calculation with the density functional theory (DFT). Its outstanding mechanical and adhesion performance is also beneficial to sustain the integrality of sulfur electrodes during the cycle life test. PPG binder-based LSBs exhibit significant promotion in prolonged cycling tests with a 79.7% capacity retention after 700 cycles at 1 C. The capacity of PPG binder-based LSBs can still maintain 933.6 mAh g<sup>–1</sup> (at 0.1 C) after 50 cycles even with a high sulfur mass loading of 4.9 mg cm<sup>–2</sup>. This result demonstrates the significance of a natural polymer in the design of a binder for a sulfur cathode to achieve LSBs with splendid cycling performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.0c01576?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.0c01576</a>.Cycling performance of LSB based on the PPG binder (Figure S1) and DFT calculations of phytic acid, phosphorylated aspartic acid, phosphorylated glutamic acid, phosphorylated serine, and phosphorylated lysine (Tables S1–S5) (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.0c01576/suppl_file/ma0c01576_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Hydrogen bonds to balance mechanical and adhesive properties of pectin/polyacrylic acid blends as efficient binders for cathode in lithium-sulfur battery

Water-Soluble Polyacrylic Acid as a Binder for Sulfur Cathode in Lithium-Sulfur Battery

Preparation and Evaluation of a New Water-Based Binder for Sulfur Cathode in Lithium–Sulfur Batteries

Amphipathic Emulsion Binder for Enhanced Performance of Lithium-Sulfur Batteries

Highly Elastic and Polar Block Polymer Binder Enabling Accommodation of Volume Change and Confinement of Polysulfide for High-Performance Lithium–Sulfur Batteries

Multifunctional water-soluble binders for Li-S batteries

Imparting Pulley Effect and Self-healability to Cathode Binder of Li-S Battery for Improvement of the Cycling Stability

Water soluble polymer binder with good mechanical property and ionic conductivity for high performance lithium sulfur battery

Oxygen self-doping pyrolyzed polyacrylic acid as sulfur host with physical/chemical adsorption dual function for lithium-sulfur batteries

Polyglutamic Acid Binder for High-Performance Lithium–Sulfur Batteries

A functional hyperbranched binder enabling ultra-stable sulfur cathode for high-performance lithium-sulfur battery

Water-based phytic acid-crosslinked supramolecular binders for lithium-sulfur batteries

Peach Gum As an Efficient Binder for High-Areal-capacity Lithium–sulfur Batteries

Highly branched amylopectin binder for sulfur cathodes with enhanced performance and longevity

Softening and Enriching Polarity of Chitosan Backbone as a Bifunctional Binder for High-performance Sulfur Cathode

Polycation Binders: an Effective Approach Toward Lithium Polysulfide Sequestration in Li–S Batteries

Effect of poly (acrylic acid)/Poly (vinyl alcohol) blending binder on electrochemical performance for lithium iron phosphate cathodes

A novel type of multifunctional binder for improved cycle stability of lithium-sulfur battery

Low-Cost and Environmentally Friendly Biopolymer Binders for Li–S Batteries

A New Hydrophilic Binder Enabling Strongly Anchoring Polysulfides for High‐Performance Sulfur Electrodes in Lithium‐Sulfur Battery

Poly(amic acid) Lithium Salt as a Multi-Functional Binder for High Performance Lithium/Sulfur Battery Cathodes