CO chemisorption at vacancies of supported graphene films: a candidate for a sensor?

E. Celasco,G. Carraro,A. Lusuan,M. Smerieri,J. Pal,M. Rocca,L. Savio,L. Vattuone

DOI: https://doi.org/10.1039/c6cp02999j

IF: 3.3

2016-01-01

Physical Chemistry Chemical Physics

Abstract:We investigate CO adsorption at single vacancies of graphene supported on Ni(111) and polycrystalline Cu.

chemistry, physical,physics, atomic, molecular & chemical

What problem does this paper attempt to address?

Adsorption of NO2 and CO molecules on Ni (1 1 1) supported defective Graphene: A DFT study

Lang Gao,Ming Zheng,Xin Zhou

DOI: https://doi.org/10.1016/j.apsusc.2022.153027

IF: 6.7

2022-07-01

Applied Surface Science

Abstract:The adsorption of NO2, CO on pristine graphene/Ni (111) and its defect system (Ni (111) supported with various defects such as mono-, di-carbon, and Stone-Wales Vacancies) has been systematically investigated with density functional theory. Calculations show that the introduction of vacancies delocalizes electrons in the entire system and improves the absorption performance of vacancies. Compared with the other three structures, it shows that VC-G/Ni is a better NO2 gas-sensitive material. The TDOS (total density of states) analysis shows that the introduction of vacancies made the electrons delocalize at the whole system and enhances the absorption performance of vacancy sites. The analysis of COHP (crystal orbital Hamilton populations) and charge transfer is the same as the adsorption energy trend, the existence of defects indeed improved the adsorption properties of graphene. The analysis of Bader charge and charge density difference shows that the Ni layer is helpful for graphene to adsorb NO2 molecules. In addition, the external electric field does have a certain influence on the adsorption performance of the material and improved the sensing efficiency for NO2. Under the applied electric field, the adsorption energy increased, and the sensing time shortened for NO2.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Intercalation and reactions of CO under single layer Graphene/Ni(111): the role of vacancies.

Rocco Davì,Giovanni Carraro,Marija Stojkovska,Marco Smerieri,Letizia Savio,Jean-Jacques Gallet,F. Bournel,Mario Rocca,Luca Vattuone

DOI: https://doi.org/10.1039/d2cp03441g

IF: 3.3

2022-11-15

Physical Chemistry Chemical Physics

Abstract:We use synchrotron radiation-induced core level photoemission spectroscopy to investigate the influence of vacancies, produced by ion bombardment, on monolayer graphene/Ni(111) exposed to CO at pressures ranging from ultra-high vacuum (10-10 mbar) up to near ambient (5.6 mbar) conditions. CO intercalates at a rate which is comparable to the one observed in absence of defects and reacts via the Boudouard reaction producing additional carbon atoms and CO2. While the former attach to the graphene layer and extend it over areas previously covered by carbide, the CO2 molecules bind to the graphene vacancies forming epoxy-like bonds across them, thus mending the defects The so-formed complexes give rise to a peak at 533.4 eV which persists upon evacuating the vacuum chamber at room temperature and which we assign to a covalently bonded species containing C and O.

chemistry, physical,physics, atomic, molecular & chemical
Theoretical Study of CO Adsorption Interactions with Cr-Doped Tungsten Oxide/Graphene Composites for Gas Sensor Application

Mohammad Ammar Syaahiran,Abdul Hanif Mahadi,Chee Ming Lim,Muhammad Raziq Rahimi Kooh,Yuan-Fong Chou Chau,Hai-Pang Chiang,Roshan Thotagamuge

DOI: https://doi.org/10.1021/acsomega.1c04936

IF: 4.1

2021-12-20

ACS Omega

Abstract:The present study explores the CO adsorption properties with graphene, tungsten oxide/graphene composite, and Cr-doped tungsten oxide/graphene composite using density functional theory (DFT) calculations. The results of the study reveal the Cr-doped tungsten oxide/graphene composites, g-CrW n-1O3n (n = 2 to 4), to have a lowered highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy gap, high surface reactivity, and a strong cluster-graphene binding energy, hence exhibiting a strong adsorption interaction with CO. The CO adsorption interaction shows physisorption properties by having a greater tendency for Mulliken and natural bond orbital (NBO) charge transfer supported by a strong physisorption interaction toward the g-CrW n-1O3n (n = 2 to 4) composite with HOMO-LUMO energy gaps of -0.638, -0.486, and -0.327 eV, respectively. The calculated photoelectron spectroscopy (PES) and infrared spectra combined with the visualized electrostatic potential and contour line confirm the population density of the physisorption interaction. The calculated results show that the g-CrW n-1O3n composite achieves a greater sensing ability by possessing the highest sensitivity, adsorption, and desorption characteristics for n = 2 (g-CrWO6 composite). In conclusion, Cr-doped tungsten oxide/graphene has high sensitivity toward CO gas.

chemistry, multidisciplinary
Adsorption of Gas Molecules on Graphene Nanoribbons and Its Implication for Nanoscale Molecule Sensor

Bing Huang,Zuanyi Li,Zhirong Liu,Gang Zhou,Shaogang Hao,Jian Wu,Bing-Lin Gu,Wenhui Duan

DOI: https://doi.org/10.1021/jp8021024

2008-01-01

Abstract:We have studied the adsorption of gas molecules (CO, NO, NO2, O-2, N-2, CO2, and NH3) on graphene nanoribbons (GNRs) using first principles methods. The adsorption geometries, adsorption energies, charge transfer, and electronic band structures are obtained. We find that the electronic and transport properties of the GNR with an-nchair-shaped edges are sensitive to the adsorption of NH3, and the system exhibits n-type semiconducting behavior after NH3 adsorption. Other gas molecules have little effect on modifying the conductance of GNRs. Quantum transport calculations further indicate that NH3 molecules can be detected out of these gas molecules by the GNR-based sensor.
Adsorption of gas molecules on transition metal embedded graphene: a search for high-performance graphene-based catalysts and gas sensors.

Miao Zhou,Yun-Hao Lu,Yong-Qing Cai,Chun Zhang,Yuan-Ping Feng

DOI: https://doi.org/10.1088/0957-4484/22/38/385502

IF: 3.5

2011-01-01

Nanotechnology

Abstract:We report an investigation on the adsorption of small gas molecules (O-2, CO, NO2 and NH3) on pristine and various transition metal embedded graphene samples using a first-principles approach based on density-functional theory (DFT). The most stable adsorption geometry, energy, charge transfer, and magnetic moment of these molecules on graphene embedded with different transition metal elements are thoroughly discussed. Our calculations found that embedded transition metal elements in general can significantly enhance the interactions between gas molecules and graphene, and for applications of graphene-based catalysis, Ti and Au may be the best choices among all transition metal elements. We also expect a detailed analysis of the electronic structures and magnetic properties of these systems to shed light on future applications of graphene-based gas sensing and spintronics.
Molecular adsorption in graphene with divacancy defects

Biplab Sanyal,Olle Eriksson,Ulf Jansson,Helena Grennberg

DOI: https://doi.org/10.48550/arXiv.0905.2114

2009-05-13

Materials Science

Abstract:We have investigated theoretically the adsorption of molecules onto graphene with divacancy defects. Using ab-initio density functional calculations, we have found that O2, CO, N2, B2 and H2O molecules all interact strongly with a divacancy in a graphene layer. Along with a complex geometry of the molecule-graphene bonding, metallic behavior of the graphene layer in presence of CO and N2 molecules have been found with a large density of states in the vicinity of the Fermi level suggesting an increase in the conductivity. The adsorption of N2 is particularly interesting since the N atoms dissociate in the vicinity of the defects, and take the place where the missing C atoms of the divacancy used to sit. In this way, the defected graphene structure is healed geometrically, and at the same time doped with electron states.
Comparative investigation of surface-electrical properties of functionalized graphene and MXene thin films for CO2 gas sensing

Pradeep Kumar,Huzein Fahmi Hawari,Monika Gupta,Wei Xian Rebecca Leong,Mohamed Shuaib Mohamed Saheed,Goran M. Stojanović,Lila Iznita Izhar

DOI: https://doi.org/10.1007/s10853-024-10440-x

IF: 4.5

2024-12-06

Journal of Materials Science

Abstract:Nowadays, CO 2 detection has become significant in many applications such as monitoring of air quality and human health. CO 2 sensors are majorly based on solid-state materials, but they require high operating temperatures. Recently, two-dimensional materials have been explored to achieve room-temperature CO 2 detection. Among them, graphene and MXene gained attraction owing to their outstanding chemical and electronic properties. Sensing materials' properties such as surface and electrical properties are very crucial to achieve highly sensitive gas sensors. In this work, we comprehensively investigate and compare the impact of surface-electrical properties of graphene and MXene on their CO 2 sensors' performance. Initially, we synthesize and characterize the surface-electrical properties of functionalized graphene (FG) and Ti 3 C 2 T x MXene. Later, chemiresistive CO 2 gas sensors are fabricated with these materials as sensing layers and their performance is examined. From material characterizations, we find that MXene surface is more hydrophilic, showing 1.5-fold higher interfacial energy, and has ~ 1.2-fold higher electrical conductivity than FG, whereas FG demonstrates lower surface roughness and outstanding stability over the period. The sensing behavior of both sensors is found to be repeatable, selective, and reproducible. The CO 2 sensor with the MXene layer reveals a lower response/recovery time (12/17 s) than that of FG (32/43 s). Also, MXene-based sensor exhibits a 25% response, revealing a 6% higher gas response than FG-based sensor. However, from the stability point of view, FG sensor outperforms the MXene sensors. We believe this study is extremely beneficial in realizing highly efficient gas sensors for air quality and health monitoring.

materials science, multidisciplinary
Building a cm2 scale CVD graphene-based gas sensor: modelling the kinetic with a three-site adsorption/desorption Langmuir model.

Vincent Malesys,Amandine Andrieux-Ledier,Pierre Lavenus,Laurent Simon

DOI: https://doi.org/10.1088/1361-6528/ad3b02

IF: 3.5

2024-04-06

Nanotechnology

Abstract:In this article, we aim to develop and study a highly sensitive and selective cm2 scale graphene-based gas sensor. We present the technology used to fabricate sensors which integrate monolayer CVD graphene: photolithography and transfer of layers. Characterization techniques (optical microscopy, AFM, micro-Raman spectroscopy, transport electrical measurements) ensure a diagnosis of graphene ribbons and allow good reproducibility of technological processes. We present the results of gas characterizations after a 200 ppm NO2 exposure. We propose a novel approach for the modelling of the sensor response with a three-site adsorption/desorption Langmuir model. This innovative way of modelling the sensor response should provide a better understanding of the sensor's kinetic and help to overcome the long response time observed with graphene gas sensors.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
INSIGHTS INTO THE ADSORPTION AND GAS SENSING PERFORMANCE OF Fe/Cu DOPED GRAPHENE

Tri Ngoc Nguyen,Dai Quoc HO,Nguyen Tien Trung

DOI: https://doi.org/10.1039/d4cp00561a

IF: 3.3

2024-04-18

Physical Chemistry Chemical Physics

Abstract:The binding mechanism of gas molecules on material surfaces is essential for understanding adsorption and sensing performance. In the present study, we examine the interaction of some volatile organic compounds (VOC), including HCHO, C2H5OH, and CH3COCH3, on pristine graphene and its Fe/Cu-doped surfaces using first-principles calculations. The results indicate that the adsorption of these molecules on graphene is regarded as physisorption, while the chemisorption is observed for Fe/Cu-doped surfaces. The binding of sites on molecules and surfaces primarily involves hydrogen bonds for the pure form of graphene. In contrast, stable interactions occur at functional groups such as >C=O, -OH with Fe/Cu atoms, as well as C=C bonds of π-rings on doped structures of graphene. It is noticeable that the stronger adsorption is observed in the case of Fe-doping (Gr-Fe) compared to Cu-doping (Gr-Cu), enhancing the gas adsorption and sensing performance on graphene. Remarkably, the graphene surfaces doped with Fe and Cu improved selectivity in detecting VOC molecules, particularly C2H5OH, CH3COCH3 for Gr-Fe and HCHO for Gr-Cu. Quantum chemical analyses reveal that the Fe/Cu‧‧‧O/C contacts are covalent interactions, contributing significantly to the stability of configurations and sensing properties of Fe/Cu doped graphene. In summary, the observed improvements in selectivity, enhanced adsorption strength, and the identification of crucial interactions at the surface offer valuable insights for designing highly efficient gas sensors and developing advanced sensing materials.

chemistry, physical,physics, atomic, molecular & chemical
FeN4-Embedded Graphene as a Highly Sensitive and Selective Single-Atom Sensor for Reaction Intermediates of Electrochemical CO2 Reduction

Yuqi Cai,Xiaocheng Zhou,Yu Wang,Yafei Li

DOI: https://doi.org/10.1021/acsomega.4c04465

IF: 4.1

2024-07-09

ACS Omega

Abstract:Exploring effective ways to detect intermediates during the electrochemical CO2 reduction reaction (CO2RR) process is pivotal for understanding reaction pathways and underlying mechanisms. Recently, two-dimensional FeN4-embedded graphene has received increasing attention as a promising catalyst for CO2RR. Here, by means of density functional theory computations combined with the non-equilibrium Green's function (NEGF) method, we proposed a detection device to evaluate the performance of FeN4-embedded graphene in intermediates detection during the CO2RR process. Our results reveal that the four key intermediates, including *COOH, *OCHO, *CHO, and *COH, can be chemisorbed on FeN4-embedded graphene with high adsorption energies and appropriate charge transfer. The computed current-voltage (I-V) characteristics and transmission spectra suggest that the adsorption of these intermediates induces significant type-dependent changes in currents and transmission coefficients of FeN4-embedded graphene. Remarkably, the FeN4-embedded graphene is more sensitive to *COOH and *COH than to *OCHO and *CHO within the entire bias window. Consequently, our theoretical study indicates that the FeN4-embedded graphene can effectively detect the key intermediates during the CO2RR process, providing a practical scheme for identifying catalytic reaction pathways and elucidating underlying reaction mechanisms.
Adsorption of H2O, NH3, CO, NO2, and NO on graphene: A first-principles study

O. Leenaerts,B. Partoens,F. M. Peeters

DOI: https://doi.org/10.1103/PhysRevB.77.125416

2007-10-09

Abstract:Motivated by the recent realization of graphene sensors to detect individual gas molecules, we investigate the adsorption of H2O, NH3, CO, NO2, and NO on a graphene substrate using first-principles calculations. The optimal adsorption position and orientation of these molecules on the graphene surface is determined and the adsorption energies are calculated. Molecular doping, i.e. charge transfer between the molecules and the graphene surface, is discussed in light of the density of states and the molecular orbitals of the adsorbates. The efficiency of doping of the different molecules is determined and the influence of their magnetic moment is discussed.

Materials Science
Study on Gas Adsorption Properties (N2, H2, O2, NO, NO2, CO, CO2, SO2, H2S, H2O and NH3) on the O-vacancy-containing Sc2CO2 Monolayer

Pham Dinh Khang,Luong Le Hai,Nguyen Thi Tham Hong,Vu Van Tuan

DOI: https://doi.org/10.25073/2588-1124/vnumap.4653

2022-03-24

Abstract:In this work, we have studied the (N2, H2, O2, NO, NO2, CO, CO2, SO2, H2S, H2O, and NH3) gases adsorption properties on the O-vacancy-containing Sc2CO2 monolayer by first-principles calculations. We have determined the preferred adsorption positions and the structural features of the O-vacancy-containing Sc2CO2 monolayer after adsorption of different gas molecules. The adsorption energy and charge transfer from the monolayer to the gas molecules have been calculated. The calculated results show that H2, N2, NH3, H2S and H2O molecules are physisorbed, while CO2, CO, NO2, NO, O2 and SO2 molecules are chemisorbed in the neighboring area of the O-vacancy of the Sc2CO2 monolayer. The existence of the O-vacancy significantly enhances the CO and CO2 adsorption intensity of the defect Sc2CO2 monolayer compared to the original Sc2CO2 monolayer. Our results show that the O-vacancy-containing Sc2CO2 monolayer can be used for detecting NO gas as a resistive sensor.
A density functional theory study on the adsorption reaction mechanism of double CO2 on the surface of graphene defects

Shujie Zhang,Zeng Liang,Kejiang Li,Jianliang Zhang,Shan Ren

DOI: https://doi.org/10.1007/s00894-022-05105-y

IF: 2.172

2022-04-12

Journal of Molecular Modeling

Abstract:Much research has been done on reactions of a single CO2 molecule with a graphene surface. In this paper, density functional theory calculations are used to investigate the adsorption and reaction of double CO2 on the surface of single vacancy (SV) and divacancy (DV) defect graphene. The study found that due to the mutual repulsion between CO2 and the size of the SV defect, it is difficult for two CO2 molecular to be adsorbed directly above the SV defect at the same time. Regardless of SV or DV, the adsorption of the first CO2 in the defect center will have a beneficial effect on the adsorption of the second CO2. In addition, the transition state calculation of the CO2 reaction on the DV plane was carried out, and the adsorption behavior was analyzed and studied. This in-depth study is helpful to the understanding of the reaction behavior of CO2 on graphene, and further exploration in the direction of the effective application of graphene to the reaction and adsorption of CO2.

chemistry, multidisciplinary,biochemistry & molecular biology,biophysics,computer science, interdisciplinary applications
CO Chemisorption on Vicinal Rh(111) Surfaces Studied with a Curved Crystal

Fernando Garcia-Martinez,Frederik Schiller,Sara Blomberg,Mikhail Shipilin,Lindsay R. Merte,Johan Gustafson,Edvin Lundgren,J. Enrique Ortega

DOI: https://doi.org/10.1021/acs.jpcc.0c00039

2020-02-04

The Journal of Physical Chemistry C

Abstract:Curved crystal surfaces enable the systematic and accurate comparison of physical and chemical processes for a full set of vicinal crystal planes, which are probed in the very same environment. Here, we examine the early stages of the CO chemisorption on vicinal Rh(111) surfaces using a curved Rh crystal that exposes a smoothly variable density of {100} (A-type) and {111} (B-type) steps. We readily identify and quantify step and terrace species by resolving their respective core-level lines using X-ray photoelectron spectroscopy at different locations on the curved surface. Uptake experiments show similar sticking probabilities at all surface planes, subtle asymmetries between A- and B-type steps, and significantly lower saturation coverage at densely stepped surfaces as compared to the (111) plane. The analysis of the C 1s intensity variation across the curved sample allows us to discuss the adsorption geometry around the step edge.
Computational screening of single transition metal atom embedded in nitrogen doped graphene for CH4 detection

Siqi Chen,Xiang Zhang,Yucui Xiang,Jing Fan,Li-Yong Gan

DOI: https://doi.org/10.1016/j.mtcomm.2022.103383

IF: 3.8

2022-06-01

Materials Today Communications

Abstract:Sensitive and selective detection of methane (CH4) is crucial for human activities, but is severely challenging due its volatility and nonpolar nature. Herein, with the aid of first-principles calculations, we explore the potential of single transition metal atoms (Fe, Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt and Au) embedded in graphene with four pyridine nitrogen atoms doped (TMN4 @G) as efficient sensor materials towards CH4. It is found that AgN4 @G enables outstanding sensitivity, selectivity and recovery ability for CH4 detection in ambient condition. Further calculations in the presence of O2 or H2O revealed that the sensitivity of the system is remarkably improved, indicating its applicability and robustness for CH4 sensing in ambient or humid conditions.

materials science, multidisciplinary
Modulation of Surface Chemistry of Co on Ni(111) by Surface Graphene and Carbidic Carbon

Mingming Wei,Qiang Fu,Yang,Wei,Ethan Crumlin,Hendrik Bluhm,Xinhe Bao

DOI: https://doi.org/10.1021/acs.jpcc.5b01395

2015-01-01

Abstract:Nickel carbide and graphene overlayers were grown on Ni(111), which were in situ monitored by near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and low energy electron microscopy. CO adsorption and desorption on the formed carbon modified Ni(111) surfaces were further investigated by NAP-XPS. We found that the carbidic carbon weakens CO adsorption on Ni, resulting in quick CO desorption around room temperature. A full graphene layer on Ni(111) blocks CO adsorption in 10(-6) Ton CO, while CO intercalates the graphene overlayers in 0.1 Torr CO at room temperature. On the graphene/CO/Ni(111) surface, the major part of intercalated CO molecules desorbs extensively around 90 degrees C from the graphene/Ni interface and the remaining part gets trapped under the graphene even at 200 degrees C. These results suggest that the surface reactivity of a metal catalyst can be strongly Modulated by surface carbon structures.
The Adsorption Behavior of Gas Molecules on Co/N Co–Doped Graphene

Tingyue Xie,Ping Wang,Cuifeng Tian,Guozheng Zhao,Jianfeng Jia,Chenxu Zhao,Haishun Wu

DOI: https://doi.org/10.3390/molecules26247700

IF: 4.6

2021-12-20

Molecules

Abstract:Herein, we have used density functional theory (DFT) to investigate the adsorption behavior of gas molecules on Co/N3 co–doped graphene (Co/N3–gra). We have investigated the geometric stability, electric properties, and magnetic properties comprehensively upon the interaction between Co/N3–gra and gas molecules. The binding energy of Co is −5.13 eV, which is big enough for application in gas adsorption. For the adsorption of C2H4, CO, NO2, and SO2 on Co/N–gra, the molecules may act as donors or acceptors of electrons, which can lead to charge transfer (range from 0.38 to 0.7 e) and eventually change the conductivity of Co/N–gra. The CO adsorbed Co/N3–gra complex exhibits a semiconductor property and the NO2/SO2 adsorption can regulate the magnetic properties of Co/N3–gra. Moreover, the Co/N3–gra system can be applied as a gas sensor of CO and SO2 with high stability. Thus, we assume that our results can pave the way for the further study of gas sensor and spintronic devices.

chemistry, multidisciplinary,biochemistry & molecular biology
Cooperative Spin Transition of Monodispersed FeN3Sites Within Graphene Induced by CO Adsorption

Qin-Kun Li,Xiao-Fei Li,Guozhen Zhang,Jun Jiang

DOI: https://doi.org/10.1021/jacs.8b07816

IF: 15

2018-01-01

Journal of the American Chemical Society

Abstract:The significance of identifying the fundamental mechanism of interactions between adjacent catalytic active centers has long been underestimated. Utilizing density functional theory calculations, we demonstrate controllable cooperative interaction between two nearby Fe centers embedded on nitrogenated graphene aided by CO adsorption. The interconnected adjacent Fe atoms respond cooperatively to CO molecules with communicative structural self-adaption and electronic transformation. The adsorbed CO changes not only the spin of the active site it is attached to but also that of its adjacent site. Consequently, the two adjacent Fe atoms feature unique oscillatory long-range spin coupling. Our theoretical investigation suggests cooperative communication between adjacent active sites on a single-atom catalyst is nontrivial.
Graphene based sensors: theoretical study

Karolina Z. Milowska,Jacek A. Majewski

DOI: https://doi.org/10.1021/jp504199r

2014-08-08

Abstract:Graphene, a 2-dimensional monolayer form of sp2 hybridizated carbon atoms, is attracting increasing attention due to its unique and superior physicochemical properties. Covalently functionalized graphene layers, with their modifiable chemical functionality and usefull electrical properties, are excellent candidates for broad range of sensors, suitable for biomedical, optoelectronic and environmental applications. Here, we present extensive study of transport properties of sensors based on covalently functionalized graphene monolayer (GML) with graphene electrodes. The transmissions, density of states and current-voltage characterisctics supported by analysis of charge distribution of GML functionalized by -CH3, -CH2, -NH2, -NH and -OH fragments have been calculated by means of density functional theory (DFT) and non-equilibrium Green's function (NEGF). Further, we demonstrate how to control the device sensitivity by manipulating: (i) concentration, (ii) particular arrangement, and (iii) type of surface groups. We explain the underlying detection physical mechanisms. Comparisons of the theoretical results to available experimental data are provided are made and show good agreement.

Materials Science
Enhancement of CO detection in Al doped graphene

Z.M. Ao,J. Yang,S. Li,Q. Jiang

DOI: https://doi.org/10.1016/j.cplett.2008.07.039

IF: 2.719

2008-08-01

Chemical Physics Letters

Abstract:A principle of the enhancement of CO adsorption was developed theoretically by using density functional theory through doping Al into graphene. The results show that the Al doped graphene has strong chemisorption of CO molecule by forming Al–CO bond, where CO onto intrinsic graphene remains weak physisorption. Furthermore, the enhancement of CO sensitivity in the Al doped graphene is determined by a large electrical conductivity change after adsorption, where CO absorption leads to increase of electrical conductivity via introducing large amount of shallow acceptor states. Therefore, this newly developed Al doped graphene would be an excellent candidate for sensing CO gas.

chemistry, physical,physics, atomic, molecular & chemical

CO chemisorption at vacancies of supported graphene films: a candidate for a sensor?

Adsorption of NO2 and CO molecules on Ni (1 1 1) supported defective Graphene: A DFT study

Intercalation and reactions of CO under single layer Graphene/Ni(111): the role of vacancies.

Theoretical Study of CO Adsorption Interactions with Cr-Doped Tungsten Oxide/Graphene Composites for Gas Sensor Application

Adsorption of Gas Molecules on Graphene Nanoribbons and Its Implication for Nanoscale Molecule Sensor

Adsorption of gas molecules on transition metal embedded graphene: a search for high-performance graphene-based catalysts and gas sensors.

Molecular adsorption in graphene with divacancy defects

Comparative investigation of surface-electrical properties of functionalized graphene and MXene thin films for CO2 gas sensing

Building a cm2 scale CVD graphene-based gas sensor: modelling the kinetic with a three-site adsorption/desorption Langmuir model.

INSIGHTS INTO THE ADSORPTION AND GAS SENSING PERFORMANCE OF Fe/Cu DOPED GRAPHENE

FeN4-Embedded Graphene as a Highly Sensitive and Selective Single-Atom Sensor for Reaction Intermediates of Electrochemical CO2 Reduction

Adsorption of H2O, NH3, CO, NO2, and NO on graphene: A first-principles study

Study on Gas Adsorption Properties (N2, H2, O2, NO, NO2, CO, CO2, SO2, H2S, H2O and NH3) on the O-vacancy-containing Sc2CO2 Monolayer

A density functional theory study on the adsorption reaction mechanism of double CO2 on the surface of graphene defects

CO Chemisorption on Vicinal Rh(111) Surfaces Studied with a Curved Crystal

Computational screening of single transition metal atom embedded in nitrogen doped graphene for CH4 detection

Modulation of Surface Chemistry of Co on Ni(111) by Surface Graphene and Carbidic Carbon

The Adsorption Behavior of Gas Molecules on Co/N Co–Doped Graphene

Cooperative Spin Transition of Monodispersed FeN3Sites Within Graphene Induced by CO Adsorption

Graphene based sensors: theoretical study

Enhancement of CO detection in Al doped graphene