Variation in Wood Density and Tracheid Length in Pinus patula grown in Zimbabwe

A. Muneri,V. Balodis
DOI: https://doi.org/10.1080/10295925.1998.9631188
1998-07-01
The Southern African Forestry Journal
Abstract:Within-tree variation of wood density was studied for 14-and 25-year-old Pinus patula Schiede & Deppe trees grown at two plantation sites in Zimbabwe. Three trees of each age per site were selected and disc samples obtained at six relative height levels. A diametric strip was prepared from each sample disc and cut into two sample strips. Conditioned density was measured along the first strip using an x-ray densitometer. The second strip was pulped while clamped between perforated plates and tracheid length measured with the Kajaani FS 200 fibre analyser. At both sites, 25-year-old trees had higher density and longer tracheids than 14-year-old trees (0,557 and 0,544 g/cm3 as against 0,476 and 0,492 g/cm3; 3,55 and 3,84 mm against 3,48 mm and 3,07 mm), There were minimal differences in wood density between sites, but tracheid length showed substantial differences between sites. Wood density and tracheid length increased with growth ring age, with a rapid increase occurring in the first 14 years for wood density and in the first 10 years for tracheid length. Radial increase for the whole stem, for all the trees, was about 50% for density and 250% for tracheid length. Wood density decreased with height, and the overall decrease, from 0% to 90% height level was about 20% for all the trees. Tracheid length increased from the butt, reaching a maximum at 10 to 30% height level before decreasing to a minimum at the apex. For all the trees, tracheid length at the 0% and 90% height levels were respectively about 25 and 20% shorter than at the 30% height level. Predictive models of within-tree wood density and tracheid length in P. patula were developed using growth ring age and relative tree height. Results indicated a cylindrical symmetry distribution for wood density and a conical symmetry distribution for tracheid length.
What problem does this paper attempt to address?